Panasonic MJ-66PRA User Manual

SPECIFICATIONS
Power supply 240V 50Hz Power consumed 250W Speed approx.13,300 rpm
Dimensions (H x W x D) Weight
approx.32.0 X 29.0 x 21.5 cm
approx. 2,9 kg
Instructions
HousehoIdJuice Extractor
Osaka 542-8588,Japan
JZ50R123 M0299-0 Printed in Japan
Panasonic
Before operating this unit, piease read these instructions compieteiy.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed Including the following:
IDENTIFICATION OF PARTS AND DISMANTLING
1. READ ALL INSTRUCTIONS BEFORE USE.
2. To protect against risk of electrical shock, do hot put Motor Housing in water or
other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts and before
cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or electrical or mechanical adjustment
7. The use of attachments not recommended or sold by the appliance manufacturer
may cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not overload motor with extra heavy loads.
11. Always make sure Container Cover is clamped securely in place before motor is
turned on. Do not unfasten Clamps while juice extractor is in operation.
12. Be sure to turn Switch to OFF position after each use of your juice extractor. Make sure the motor stops completely before disassembling.
13. Do not put your fingers or other objects into the juice extractor Feeder Opening
while it is in operation. If food becomes lodged in Feeder Opening, use Food
Pusher or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble juice extractor to remove the
remaining food.
14. Always place a bowl, glass or cup under the spout.
15. Never wash the parts in hot water or expose them to excessive heat.
16. Do not wash washable parts in a dishwasher.
17. Do not assemble when there is food residue left around the base of the Strainer or
Container.
18. All parts must be clean. Food particles left may cause odors, stains or prevent the
Strainer from functioning properly.
19. This appliance is intended for home use only and not for commercial or industrial use.
20. Do not place appliance on or near hot gas or electric range.
21. To disconnect, grip plug and pull from wall outlet. Never pull on cord.
22. Make sure Strainer is completely stopped before removing Cover.
23. Never leave room while appliance is running.
24. This appliance should be used only for its intended use as described in the
instruction manual.
25. If the supply cord of this equipment is damaged,it must be replaced by the special
cord i Part N0.AJAO5R123).
26. The appliance is not intended for use by young children or infirm persons without supervision. ^
27. Young children should be supervised to ensure that they do not play with the appliance.
Cleaning Brush
Food Pusher
Feeder Opening
Opening for Brush
Container Cover
Strainer
TO DISMANTLE
1. Release Clamps as arrows indicate.
2. Lightly lift up the Container. The Strainer will come
with it.
3. Remove the Container Cover.
4. The Strainer can be easily removed from the
Container by lifting it out by the edges.
5. Remove the Spout Cover and clean the spout.
Be sure to snap the Spout Cover completely back into place before using.
6. After dismantling each part, wash it in cold or
lukewarm water except the Motor Housing.
-2-
Loading...
+ 2 hidden pages