Panasonic MC-V6945 User Manual
Operating
Instructions
MC-V6945
MC-V6975
Panasonic.
Before operating your vacuum cleaner, please read these instructions completely.
CONSUMER INFORMATION
Please read IMPORTANT SAFETY INSTRUCTIONS on page 4
before use. Read and understand all instructions.
TO OUR VALUED CUSTOMER
We are very pleased to welcome you to the Panasonic family of products ThanK you for
purchasing this product Our intent is that you become one of our many satisfied customers
Proper assembly and safe use of your vacuum cleaner are your responsibfllAes Your
cleaner is intended only for household use Tfie cleaner should be stored in a dry, indoor
area Read the Operating Instructions carehilly for important use and safety information
PLEASE PAY CLOSE ATTENTION TO THE
WARNING AND CAUTION LABELS THAT
ARE FOUND THROUGHOUT THIS MANUAL.
WARNING labels are designed to alert you to the
possibility of personal injury, loss of human life,
A
WARNING
and/or damage to the vacuum cleaner and/or
personal property if the instructions given are
not followed
CAUTION labels are designed to alert you to the
A
A
TO AVOID ELECTRICAL SHOCK
Never vacuum damp or wet surfaces or liquids
Do not store machine outdoors
Replace worn or frayed power cord immediately
TO AVOID ACCIDENTS
Except for hand-held cleaners, keep machine on floor - not chairs, tables, steps, stairs, etc
Store machine promptly after each use to prevent accidents such as tripping over power cord or machine
Use machine and accessones only in a manner intended by the manufacturer
The use of an extension cord is not recommended
01996 Matsushita Electric Industrial Co , Ltd All rights reserved
CAUTION
WARNING
possibility of damage to the vacuum cleaner
and/or personal property if the instructions given
are not followed
-2-
TABLE OF CONTENTS
CONSUMER INFORMATION..........................................................................2
IMPORTANT SAFETY INSTRUCTIONS.........................................................4
PARTS IDENTIFICATION................................................................................5
Feature Chart.............................................................................................5
TO ASSEMBLE CLEANER..............................................................................6
Attaching Handle to Vacuum Cleaner
Using the Cord Hook..................................................................................6
Attachment (Tools-on-Board) Assembly
SPECIAL FEATURES OF CLEANER
Automatic Self Adjusting Rug Nozzle
Edge Cleaning Feature..............................................................................8
Dirt Sensor (MC-V6975)............................................................................8
TO OPERATE CLEANER................................................................................9
Power Cord................................................................................................ 9
On/Off Switch (MC-V6945)........................................................................9
On/Off Switch (MC-V6975)
Dirt Sensor {MC-V6975)
Handle Adjustments.................................................................................10
Use of Attachments.................................................................................11
ROUTINE CARE OF CLEANER ...................................................................12
Cleaning Secondary Foam Filter
Replacing Exhaust Filter..........................................................................12
Changing the Dust Bag
Removing/lnstalling the Lower Plate........................................................14
Replacing the Headlight Bulb
Replacing the Drive Belt
Cleaning the Agitator Assembly...............................................................15
Replacing the Agitator Assembly.............................................................16
Cleaning Dirt Sensor Optics (MC-V6975)................................................17
Cleaning Exterior and Attachments.........................................................17
Removing Clogs
BEFORE REQUESTING SERVICE
NOTES .....................................................................................................20-22
WARRANTY ..................................................................................................23
WHAT TO DO WHEN SERVICE IS NEEDED
......................................................................................
........................................................................
..........................................................................
............................................................................
..................................................................
..........................................................................
........................................................
....................................................
............................................................
........................................................
.............................................................
.............................................................
................................
Back Cover
10
12
13
14
15
18
19
6
7
8
8
9
-3-
IMPORTANT SAFETY INSTRUCTIONS
When using vacuum cleaner, basic precautions should always
be followed, including the following
READ ALL INSTRUCTIONS BEFORE
USING THIS VACUUM CLEANER
WARNING
To reduce the risk of fire, electrical shock, injury
1 Do not leave vacuum cleaner when plugged in Unplug from outlet when
not in use and before servicing
2 To reduce the risk of fire, electric shock - Do not use outdoors or on wet
surfaces
3 Do not allow to be used as a toy Close attention is necessary when
used by or near children
4 Use only as described in this manual Use only manufacturer's
recommended attachments
5 Do not use with damaged cord or plug If vacuum cleaner is not working
as It should, has been dropped, damaged, left outdoors, or dropped into
water, return it to an Authorized Panasonic Service Center
6 Do not pull or carry by cord, use cord as a handle, close door on cord, or
pull cord around sharp edges or corners Do not run vacuum cleaner over
cord Keep cord away from heated surfaces
7 Do not unplug by pulling on cord To unplug, grasp the plug, not the cord
8 Do not handle plug or vacuum cleaner with wet hands
9 Do not put any objects into openings Do not use with any opening
blocked, keep free of dust, lint, hair, and anything that may reduce air flow
10 Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts
11 Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes
12 Do not use without dust bag and/or filters in place
13 Turn off all controls before unplugging
14 Use extra care when cleaning on stairs
15 Do not use cleaner to pick up flammable or combustible
liquids such as gasoline or use in areas where they may be present
SAVE THESE INSTRUCTIONS
THIS VACUUM CLEANER IS INTENDED
FOR HOUSEHOLD USE ONLY
Notice: Before you plug in your Panasonic Vacuum Cleaner, make sure that
the voltage indicated on the rating plate located at the back of the
vacuum cleaner is the same as your local supply
-4-
Dirt Sensor
(MC‘V697S)
Wand
Crevice
Tool
Dust Cover ■
(Dust Bag
Inside)
Exhaust
Filter (inside
Dust Cover)
PARTS IDENTIFICATION
On/OftSwitch
(MC-V6975)
Hose
On/Off
Switch
(MC-V6945)
Secondary
Filter (Inside
Dust Cover)
Nozzle
Foot Rest For
Furniture Guard
Handle Release
FEATURE CHART
(PANASONIC UPRIGHT VACUUM CLEANER)
^^\FEATURES POWER
DIRT HEADLIGHT CORD
SENSOR LENGTH
Model
MC-V6945
MC-V6975
120V. AC(60Hz)
12.0 Amps
120V AC(eOHz)
12.0 Amps
No Yes 25
Yes Yes 30
-5-
(feet)
TO ASSEMBLE CLEANER
A
Do not plug into electrical supply until assembly is complete Failure to do so could
result in electrical shock or Injury
mmiHG
Electrical Shock Hazard,
ATTACHING HANDLE TO VACUUM CLEANER
The vacuum cleaner main body and handle are packed separately
1 The handle
screw has been
installed for
shipping
purposes
Please
remove the
screw before
inserting
handle Insert
the handle as
shown in the
illustration Make sure the On/Off switch is
IS in the Off position before installing
There is a recessed area between the
upper cord Storage hook base and
the handle that is designed to secure
the cord during vacuuming
Always push the power cord
down in this recess area to help
keep the cord from hanging near
the nozzle and being damaged
Handle
Insert the screw
that you removed
Be sure the screw
IS tightened, but
not overtightened
Loosely wrap the cord around
both cord hooks Secure the
plug head to the cord by
pushing the cord into the
retainers on the plug head
USING THE CORD HOOK
The upper cord hook has a
quick-release action To
release the cord, rotate the
hook downward and the
complete power cord will
drop off the hook for
immediate use
Do not unplug the power cord by
pulling on the cord Grasp the
plug head and pull to unplug
the vacuum cleaner
Return the hook to the upright
position before attempting to
rewind the cord
-6-
A
CAUTION
Do not get the power cord caught under the agitator when using the vacuurri
or attachments.
ATTACHMENTS
Wands
(E
DustingBrush
IJ — Upholstery Tool Tool
The attachments should be conveniently positioned
on the back and side of the cleaner for easy access.
Assemble the hose and attachments to the cleaner
as follows:
Place the hose in front of the handle. Grasp the end
of the hose and connect it to the wand, twisting as
you push down.
T
Crevice
Place the wand in the rear slot of the tool holder,
twisting as you push down over the short hose to
assure a good connection.
Store the other wand, dusting brush, and the
upholstery tool on the rear of the dust
compartment in their proper locations. Place
the crevice tool into the front slot of the tool
holder. Refer to the illustration in the
Parts Identification section tor the proper
position of the crevice tool.
-7-
Wand
Dusting
Brush
Upholstery
Tool
SPECIAL FEATURES OF CLEANER
AUTOMATIC SELF ADJUSTING RUG NOZZLE
Your Panasonic upright vacuum cleaner is
designed with an automatic self adjusting
rug nozzle. No manual adjustments are
required. The height of the rug nozzle is
instantly and automatically adjusted to any
carpet pile height. This self adjusting
feature allows the rug nozzle to float evenly
over alt carpet pile surfaces.
Deep Pile Carpet
Shallow Pile Carpet
DIRT SENSOR (MC-V6975)
The electronic sensor is a feature which will
detect particles as they pass through the
vacuum cleaner.
Red light indicates dirt is being picked up by
the cleaner. Green light indicates no dirt.
The dirt sensor indicators and sensor sensitivity
switch are located on the top of the switch cover.
See the Dirt Sensor section under To Operate
Cleaner section for operation.
-8-
Loading...