Panasonic MC-V5340 User Manual
Operating
Instructions
VACUUM CLEANER
MC-V5340
Panasonic.
Before operating your vacuum cleaner, please read these instructions completely.
CONSUMER INFORMATION
Please read IMPORTANT SAFETY INSTRUCTIONS on page 4 before use. Read and understand all instructions.
TO OUR VALUED CUSTOMER
We are very pleased to welcome you to the Panasonic family of products. Thank you for
purchasing this product. Our intent is that you become one of our many satisfied customers.
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your
cleaner is intended only for household use. The cleaner should be stored in a dry, indoor
area. Read the Operating instructions carefutiy for important use and safety information.
PLEASE PAY CLOSE ATTENTION TO THE
WARNING AND CAUTION LABELS THAT
ARE FOUND THROUGHOUT THIS MANUAL.
WARNING labels are designed to alert you to the
possibility of personal injury, loss of human life,
A
WMNING
and/or damage to the vacuum cleaner and/or
personal property if the instructions given are
not followed.
CAUTION labels are designed to alert you to the
A
A
TO AVOID ELECTRICAL SHOCK
Never vacuum damp or wet surfaces or liquids.
Do not store machine outdoors.
Replace worn or frayed power cord immediately.
TO AVOID ACCIDENTS
Except for hand*held cleaners, keep machine on floor • not chairs, tables, steps, stairs, etc.
Store machine promptly after each use to prevent accidents such as tripping over power cord or machine.
Use machine and accessories only in a manner intended by the manufacturer.
The use of an extension cord is not recommended.
01996 Matsushita Electric Industrial Co., Ltd. All rights reserved.
CAUTION
WARNING
possibility of damage to the vacuum cleaner
and/or personal property if the instructions given
are not followed.
-2 -
TABLE OF CONTENTS
CONSUMER INFORMATION........................................................................................2
IMPORTANT SAFETY INSTRUCTIONS
PARTS IDENTIFICATION.............................................................................................5
Feature Chart.........................................................................................................5
TO ASSEMBLE CLEANER...........................................................................................6
Attaching Handle to Vacuum Cleaner..................................................................6
Using the Cord Hook.............................................................................................6
Attachment (Tools-on-Board) Assembly
SPECIAL FEATURES OF CLEANER ..........................................................................8
Automatic Self Adjusting Rug Nozzle.................................................................8
Edge Cleaning Feature.........................................................................................8
TO OPERATE CLEANER ............................................................................................9
Power Cord............................................................................................................9
On/Off Switch.........................................................................................................9
Handle Adjustments..............................................................................................9
Use of Attachments............................................................................................10
ROUTINE CARE OF CLEANER
Replacing Secondary Electrostatic Filter
Changing the Dust Bag.......................................................................................12
Removing/lnstalling the Lower Plate.................................................................13
Replacing the Headlight Bulb............................................................................13
Replacing the Drive Belt.....................................................................................14
Cleaning the Agitator Assembly........................................................................14
Replacing the Agitator Assembly......................................................................15
Cleaning Exterior and Attachments.................................................................. 16
Removing Clogs
BEFORE REQUESTING SERVICE
NOTES .........................................................................................................................18
WARRANTY ................................................................................................................19
WHAT TO DO WHEN SERVICE IS NEEDED
.................................................................................................
......................................................................
..........................................................
...............................................................................
........................................................
............................................................................
............................................
Back Cover
7
11
11
16
4
17
-3 -
IMPORTANT SAFETY INSTRUCTIONS
When using vacuum cleaner, basic precautions should always
be followed, including the following
READ ALL INSTRUCTIONS BEFORE
USING THIS VACUUM CLEANER
WARNING
To reduce the risk of fire, electncal shock, injury
1 Do not leave vacuum cleaner when plugged in Unplug from outlet when
not in use and before servicing
2 To reduce the risk of fire, electric shock - Do not use outdoors or on wet
surfaces
3 Do not allow to be used as a toy Close attention is necessary when
used by or near children
4 Use only as described in this manual Use only manufacturer's
recommended attachments
5 Do not use with damaged cord or plug If vacuum cleaner is not working
as It should, has been dropped, damaged, left outdoors, or dropped into
water, return it to an Authorized Panasonic Service Center
6 Do not pull or carry by cord, use cord as a handle, close door on cord, or
pull cord around sharp edges or corners Do not run vacuum cleaner over
cord Keep cord away from heated surfaces
7 Do not unplug by putting on cord To unplug, grasp the plug, not the cord
8 Do not handle plug or vacuum cleaner with wet hands
9 Do not put any objects into openings Do not use with any opening
blocked, keep free of dust, lint, hair, and anything that may reduce air flow
10 Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts
11 Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes
12 Do not use without dust bag and/or filters in place
13 Turn off all controls before unplugging
14 Use extra care when cleaning on stairs
15 Do not use cleaner to pick up flammable or combustible
liquids such as gasoline or use in areas where they may be present
SAVE THESE INSTRUCTIONS
THIS VACUUM CLEANER IS INTENDED
FOR HOUSEHOLD USE ONLY
Notice: Before you plug in your Panasonic Vacuum Cleaner, make sure that
the voltage indicated on the rating plate located at the back of the
vacuum cleaner is the same as your local supply
-4-
PARTS IDENTIFICATION
FEATURE CHART
(PANASONIC UPRIGHT VACUUM CLEANER)
^^reATURES
Model
MC-V5340
POWER
120V. AC(60Hz)
12.0 Anrips
VAC
GAUGE
No
HEADLIGHT CORD
Yes 25
-5-
LENGTH
(feet)
TOOLS
-ON
BOARD
Yes
TO ASSEMBLE CLEANER
A
Do not plug Into electrical supply until assembly is complete. To do so could result
In electrical shock or Injury.
WARNING
Electrical Shock Hazard.
ATTACHING HANDLE TO VACUUM CLEANER
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for
shipping purposes.
Please remove the
screw before inserting
the handle. Insert the
handle as shown in the
illustration. Ensure that the
cord hooks are on the
back side of the handle
before inserting.
3. There is a recessed area between
the upper cord hook base and the
handle that is designed to secure
the cord during vacuuming.
Handb
Hole.
Screw
2. Line up the small hole in
the handle with the small
hole in the vacuum cleaner
and insert the screw that
you have removed. Use a
screwdriver to assure the
screw is tightened Handle
securely. screw
4. Loosely wrap the cord around both
cord hooks. Secure the plug head to
the cord by pushing the cord into the _
retainers on the plug head.
Always push the power cord
down in this recessed area to help
keep the cord from hanging near
the nozzle and being damaged.
USING THE CORD HOOK
1. The upper cord hook has a
quick-release action. To
release the cord, rotate the
hook downward and the
complete power cord will
drop off the hook for
immediate use.
2. Do not unplug the power cord by
pulling on the cord. Grasp the
plug head and pull to unplug
the vacuum cleaner.
Return the hook to the upright
position before attempting to
rewind the cord.
-6-
Loading...