Panasonic MC-E8021, MC-E8023, MC-E8021K, MC-E8023K, MC-E8024 Service Manual

© 2005 Matsushita Electric Industrial Co., Ltd. All

rights reserved. Unauthorized copying and
distribution is a violation of law.

MC-E8021
MC-E8021K
MC-E8023
MC-E8023K
MC-E8024
MC-E8024K

Destination : Europe

Vacuum Cleaner

ORDER NO.ECD0502001C2

1. Lift up dust compartment and take it out. (Fig.1) 2. Remove screws from Ornamental Plate and handle and
take them out. (Fig.2)

*There are 2 latches on the front side of Ornamental
plate.
Please remove it by pulling strongly from the back side.

3 REPLACEMENT OF MAIN PARTS

IMPORTANT: Before replacing any part always

DISCONNECT THE CLEANER FROM THE ELECTRICITY SUPPLY.

3.1. MOTOR

4

MC-E8021 / MC-E8021K / MC-E8023 / MC-E8023K / MC-E8024 / MC-E8024K

3. Remove screws from upper body and take out front cover
and upper body. (Fig.3)

*There are 2 latches in the back side of Upper body.
Please remove it by pulling strongly from the front side.

Important: When reassembling the Switch Pedal,
please place ControlAxis and Switch Pedal in the right
place as they can fit.

4. Lift up cord reel unit and remove the two lead wires
(provided with quick-connect terminal) from the contact
springs. (Fig. 4)

5. Take out motor unit and remove motor cover. (Fig.5)

5

MC-E8021 / MC-E8021K / MC-E8023 / MC-E8023K / MC-E8024 / MC-E8024K