Panasonic LB SC9 Users Manual

2

SQT0471

Thank you for purchasing this product.
Please read these instructions carefully before using this
product, and save this manual for future use.

Precautions

Unit

To reduce the risk of fire, electric shock or product damage,
p Do not expose this unit to rain, moisture, dripping or

splashing.

p Do not place objects filled with liquids, such as vases, on this

unit.

p Use only the recommended accessories.
p Do not remove covers.
p Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

AC cable

p The socket outlet shall be installed near the equipment and

shall be easily accessible.

p Do not use any other AC cables except the supplied one.

USB cable

p Do not use any other USB cables except the supplied one.

Unit

p This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein
may result in hazardous radiation exposure.

p This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.

p Use the supplied pedestal in vertical installation.
p The unit is in the standby condition when the AC adaptor is

connected. The primary circuit is always “live” as long as the
AC adaptor is connected to an electrical outlet.

p Do not place sources of naked flames, such as lighted

candles, on this unit.

Placement

To reduce the risk of fire, electric shock or product damage,
p Do not install or place this unit in a bookcase, built-in cabinet

or in another confined space. Ensure this unit is well
ventilated.

p Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

AC adaptor

This AC adaptor operates on AC between 100V and 240V.
But
p In the U.S.A. and Canada, the AC adaptor must be

connected to a 120V AC power supply only.

p When connecting to an AC supply outside of the U.S.A. or

Canada, use a plug adaptor to suit the AC outlet
configuration.

p When connecting to a supply of greater than AC 125V,

ensure the cord you use is suited to the voltage of the AC
supply and the rated current of the AC adaptor.

p Contact an electrical parts distributor for assistance in

selecting a suitable AC plug adaptor or AC cord set.

p Do not use any other AC adaptors except the supplied one.

USB cable

p Be sure to check the orientation of the connector before

connecting the USB port. Carefully insert the connector all
the way in until it is firmly in place.

Product identification marking

WARNING

CAUTION

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a res idential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.

FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded
interface cables with ferrite core when connecting to computer
or peripheral devices. Any changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.

Declaration of Conformity
Trade Name: Panasonic
Model No.: LB-SC9

Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 0710 2-5490

Support Contact:

http://xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx

Conforms to UL STD 60950-1.

Product Location

DATA ARCHIVER Back

AC Adaptor Bottom

(2)

/%6&647ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸱᭶㸯㸯 ᪥ࠉỈ᭙᪥ࠉ༗ᚋ㸯󰪍㸯㸷ศ

-The application product(LB-SC9) is the unit used in the system.

-This manual is the excerpt of only portions related to the application of the manual of whole system.

Operating the PC Set up and management of magazine

Drive information

Display unit configuration information.

1 Right-click the Drive icon of the unit.

2 Select “Utility”  “Properties” from the menu.

3 Select the “Drive information” tab on the

displayed screen.

≥ The following information on the unit will be

shown.

` Model name

Displays the model name of the unit.

` Serial No.

Displays the serial number of the unit.

` Firmware version

Displays the current firmware version of the
unit.

Magazine information

Display magazine information.

1 Right-click the Drive icon of the unit.

2 Select “Utility”  “Properties” from the menu.

3 Select the “Magazine information” tab on the

displayed screen.

≥ The following information on the magazine will be

shown.

` Magazine type

Displays the disc type inside of magazine and
the capacity.

` Serial No.

Displays the serial number of the magazine.

` Write-protect

Allows you to confirm the write-protect switch’s
condition of the magazine. (> 9)
“Write-enabled” of the write-protect switch’s
condition shows as “OFF”, “Write-disabled”
shows as “ON”.

∫ Version Information

Display the current driver software version.

1 Right-click the Drive icon of the unit.

2 Select “Utility”  “Version Information” from the

menu.

≥ The current driver software version will be shown.

24