Panasonic KX-TGA939BX User Manual

TGA939BX(e).fm Page 1 Thursday, October 29, 2009 11:23 AM

Installation Manual

Additional Digital Cordless Handset

Model No.

Thank you for purchasing a Panasonic product.

This unit is an additional handset compatible with the following
Panasonic Digital Cordless Phone: KX-TG9385
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit’s operating instructions for further details.

KX-TGA939BX

Charge the batteries for about 7 hours before initial use.

Please read this installation manual before using the unit and
save it for future reference.

TGA939BX(e).fm Page 2 Thursday, October 29, 2009 11:23 AM

Supplied accessories

Accessory item/Part number Quantity

Charger 1

AC adaptor for charger/PQLV219BX 1

*1

Rechargeable batteries
HHR-55AAAB or N4DHYYY00004

Handset cover

Belt clip 1

*1 Please read the base unit’s operating instructions for replacement

battery information.

*2 The handset cover comes attached to the handset.

Note:

LPlease read the base unit’s operating instructions for additional/

replacement accessories.

*2

/

2

1

Connection

(100-240 V AC,
50/60 Hz)

Note:

LUse only the supplied Panasonic AC adaptor PQLV219BX.
LThe AC adaptor must remain connected at all times. (It is normal for

the adaptor to feel warm during use.)

Hooks

– 2 –

TGA939BX(e).fm Page 3 Thursday, October 29, 2009 11:23 AM

Battery installation and battery charge

Important:

LUse the supplied rechargeable batteries (Part No. HHR-55AAAB).
LWhen installing the batteries:

– Wipe the battery ends (S, T) with a dry cloth.
– Avoid touching the battery ends (S, T) or the unit contacts.
– Confirm correct polarities (S, T).

LWhen replacing the batteries:

– USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– We recommend using the Panasonic rechargeable batteries noted

in the base unit’s operating instructions for replacement battery
information.

1 Press the notch on the handset cover firmly, and slide it in the

direction of the arrow.

2 Insert the batteries negative (T) end first. Close the handset cover.
3 Place the handset on the charger for about 7 hours before initial

use.

Note:

LIf the batteries are fully charged, but the operating time seems to be

shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth.

– 3 –