Panasonic KX-TGA930T, KX-TGA930 User Manual
Installation Manual
Additional Digital Cordless Handset
Model No.
Thank you for purchasing a Panasonic digital cordless phone.
This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phones:
KX-TG6311/KX-TG6321/KX-TG9331/KX-TG9341/
KX-TG9361/KX-TG9371/KX-TH1211
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and
save it for future reference.
For assistance, visit our website:
http://www.panasonic.com/help
for customers in the U.S.A. or
Puerto Rico.
KX-TGA930
PNQX1006ZA DM0208PY0
Supplied accessories
Accessory item/Order number Quantity
Charger/PNLC1004ZB 1
AC adaptor for charger/PQLV209T 1
Rechargeable batteries
Handset cover
Belt clip/PNKE1004Z1 1
*1 Please read the base unit’s operating instructions for replacement
battery information.
*2 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
*2
*1
/PNYNTGA430BR 1
2
Sales and support information
LTo order additional/replacement accessories, call 1-800-332-5368.
LTTY users (hearing or speech impaired users) can call 1-866-605-
1277.
Connection
(120 V AC,
60 Hz)
Note:
LUse only the supplied Panasonic AC adaptor PQLV209.
Hooks
2 For assistance, please visit http://www.panasonic.com/help
LThe AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
Battery installation and battery charge
Important:
LUse the supplied rechargeable batteries (Part No. HHR-65AAABU).
LWhen installing the batteries:
– Wipe the battery ends (S, T) with a dry cloth.
– Avoid touching the battery ends (S, T) or the unit contacts.
– Ensure correct polarities (S, T).
LWhen replacing the batteries:
– USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– We recommend using the Panasonic rechargeable batteries noted
in the base unit’s operating instructions for replacement battery
information.
1 Press the notch on the handset cover firmly, and slide it in the
direction of the arrow.
2 Insert the batteries negative (T) end first. Close the handset cover.
3 Place the handset on the charger for about 7 hours before initial
use.
Note:
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth.
For assistance, please visit http://www.panasonic.com/help 3
Attention:
A nickel metal hydride battery that is
recyclable powers the product you
have purchased.
Please call 1-800-8-BATTERY (1800-822-8837) for information on how
to recycle this battery.
Registering a handset to a base unit
Base unit:
1
KX-TG6311/KX-TG9361/KX-TH1211
Press and hold {LOCATOR} for 4 seconds. (No registration tone)
KX-TG6321/KX-TG9331/KX-TG9341/KX-TG9371
Press and hold {LOCATOR} for 4 seconds until the registration tone
sounds.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
LThe next step should be completed within 90 seconds.
2 Handset:
Press {OK}, then wait until a long beep sounds.
Note:
LWhile registering, “Base registering” is displayed on all
registered handsets.
LIf “Error!!” is displayed while registering, press {OFF} and register
the handset again.
Display language
{MENU} i {#}{1}{1}{0}
1
2 {V}/{^}: Select the desired setting.
3 Press the right soft key to save. i {OFF}
4 For assistance, please visit http://www.panasonic.com/help
Loading...