Panasonic KX-TGA930BX User Manual

TGA930BX(e).fm Page 1 Thursday, March 13, 2008 6:25 PM

Installation Manual

Additional Digital Cordless Handset

Model No.

Thank you for purchasing a Panasonic digital cordless phone.

This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phones:
KX-TG9311/KX-TG9331/KX-TG9341/KX-TG9361
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit’s operating instructions for further details.

KX-TGA930BX

Charge the batteries for about 7 hours before initial use.

Please read this installation manual before using the unit and
save it for future reference.

TGA930BX(e).fm Page 2 Thursday, March 13, 2008 6:25 PM

Supplied accessories

Accessory item/Part number Quantity

Charger 1

AC adaptor for charger/PQLV209BX 1

Rechargeable batteries

Handset cover

Belt clip 1

*1 Please read the base unit’s operating instructions for replacement

battery information.

*2 The handset cover comes attached to the handset.

Note:

LPlease read the base unit’s operating instructions for additional/

replacement accessories.

*2

*1

2

1

Connection

(220-240 V AC,
50/60 Hz)

Note:

LUse only the supplied Panasonic AC adaptor PQLV209BX.
LThe AC adaptor must remain connected at all times. (It is normal for

the adaptor to feel warm during use.)

Hooks

– 2 –

TGA930BX(e).fm Page 3 Thursday, March 13, 2008 6:25 PM

Battery installation and battery charge

Important:

LUse the supplied rechargeable batteries (Part No. HHR-65AAAB).
LWhen installing the batteries:

– Wipe the battery ends (S, T) with a dry cloth.
– Avoid touching the battery ends (S, T) or the unit contacts.
– Ensure correct polarities (S, T).

LWhen replacing the batteries:

– USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– We recommend using the Panasonic rechargeable batteries noted

in the base unit’s operating instructions for replacement battery
information.

1 Press the notch on the handset cover firmly, and slide it in the

direction of the arrow.

2 Insert the batteries negative (T) end first. Close the handset cover.
3 Place the handset on the charger for about 7 hours before initial

use.

Note:

LIf the batteries are fully charged, but the operating time seems to be

shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth.

– 3 –

TGA930BX(e).fm Page 4 Thursday, March 13, 2008 6:25 PM

Registering a handset to a base unit

Base unit:

1

KX-TG9311/KX-TG9361
Press and hold {LOCATOR} for 4 seconds. (No registration tone)

KX-TG9331/KX-TG9341

Press and hold {LOCATOR} for 4 seconds until the registration tone
sounds.

LIf all registered handsets start ringing, press the same button to

stop. Then repeat this step.

LThe next step should be completed within 90 seconds.

2 Handset:

Press {OK}, then wait until a long beep sounds.

Note:

LWhile registering, “Base registering” is displayed on all

registered handsets.

LIf “Error!!” is displayed while registering, press {OFF} and register

the handset again.

Wall mounting

Drive the screws (not included) into the wall.

1
2 Mount the charger (A), then slide it down (B) and to the right (C)

until it is secure.

25.4 mm

Screws

(220-240 V AC, 50/60 Hz)

– 4 –

A

B

C

TGA930BX(e).fm Page 5 Thursday, March 13, 2008 6:25 PM

Belt clip

You can hang the handset on your belt or pocket using the supplied belt
clip.

NTo attach the belt clip NTo remove the belt clip

For your safety

To prevent severe injury and loss of life/property, read this section
carefully before using the product to ensure proper and safe operation of
your product.

WARNING

Power connection

LCompletely insert the AC adaptor/power plug into the power outlet.

Failure to do so may cause electric shock and/or excessive heat
resulting in a fire.

LRegularly remove any dust, etc. from the AC adaptor/power plug by

pulling it from the power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation defect from moisture, etc.
resulting in a fire.

LUnplug the product from power outlets if it emits smoke, an abnormal

smell, or makes an unusual noise. These conditions can cause fire or

– 5 –

TGA930BX(e).fm Page 6 Thursday, March 13, 2008 6:25 PM

electric shock. Confirm that smoke has stopped emitting and contact
an authorized service center.

Installation

LTo prevent the risk of fire or electrical shock, do not expose the product

to rain or any type of moisture.

LDo not place or use this product near automatically controlled devices

such as automatic doors and fire alarms. Radio waves emitted from
this product may cause such devices to malfunction resulting in an
accident.

CAUTION

Installation and relocation

LThe AC adaptor is used as the main disconnect device. Ensure that

the AC outlet is installed near the product and is easily accessible.

Battery

LWe recommend using the supplied batteries or additional/replacement

batteries noted in the base unit’s operating instructions for
replacement battery information. USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.

LDo not mix old and new batteries.
LDo not open or mutilate the batteries. Released electrolyte from the

batteries is corrosive and may cause burns or injury to the eyes or skin.
The electrolyte may be toxic if swallowed.

LExercise care when handling the batteries. Do not allow conductive

materials such as rings, bracelets or keys to touch the batteries,
otherwise a short circuit may cause the batteries and/or the conductive
material to overheat and cause burns.

LCharge the batteries provided with or identified for use with this

product only, in accordance with the instructions and limitations
specified in this manual.

– 6 –

TGA930BX(e).fm Page 7 Thursday, March 13, 2008 6:25 PM

LOnly use a compatible base unit (or charger) to charge the batteries.

Do not tamper with the base unit (or charger). Failure to follow these
instructions may cause the batteries to swell or explode.

Other information

LOperating the product near electrical appliances may cause

interference. Move away from the electrical appliances.

LUse only the power cord and batteries indicated in this manual. Do not

dispose of batteries in a fire. They may explode. Check with local
codes for possible special disposal instructions.

Routine care

LWipe the outer surface of the product with a soft moist cloth.
LDo not use benzine, thinner, or any abrasive powder.

Notice for product disposal, transfer, or return

LThis product can store your private/confidential information. To protect

your privacy/confidentiality, we recommend that you erase the
information such as phonebook or caller list entries from the memory
before you dispose of, transfer, or return the product.

– 7 –

TGA930BX(e).fm Page 8 Thursday, March 13, 2008 6:25 PM

Panasonic Communications Co., Ltd.

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Copyright:

This material is copyrighted by Panasonic Communications Co., Ltd.,
and may be reproduced for internal use only. All other reproduction, in
whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
© 2008 Panasonic Communications Co., Ltd. All Rights Reserved.

PNQX1252ZA DM0308PN0