Panasonic KX-TG6801E, KX-TG6802E, KX-TG6803E User guide

Operating Instructions

Digital Cordless Answering System

Model No. KX-TG6801E

KX-TG6802E
KX-TG6803E

Model shown is KX-TG6801.

Before initial use, see “Getting Started”
on page 10.

Thank you for purchasing a Panasonic product.

Please read these operating instructions before using the unit and save them for
future reference.

TG680xE_(en)_0917_ver013.pdf 1TG680xE_(en)_0917_ver013.pdf 1 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Introduction

Model composition .......................................3

Accessory information ..................................3

General information ......................................5

Important Information

For your safety .............................................6

Important safety instructions ........................7

For best performance ...................................7

Other information .........................................8

Specifications ...............................................9

Getting Started

Setting up ...................................................10

Controls ......................................................12

Display icons ..............................................13

Turning the power on/off ............................14

Language setting ........................................14

Date and time .............................................14

Recording your greeting message .............14

Other settings .............................................15

Making/Answering Calls

Making calls ...............................................16

Answering calls ..........................................16

Useful features during a call .......................16

Intercom .....................................................18

Key lock ......................................................18

Phonebook

Phonebook .................................................19

Speed dial ..................................................20

Programming

Menu list .....................................................21

Alarm ..........................................................25

Nuisance call block ....................................25

Other programming ....................................26

Caller ID Service

Using Caller ID service ...............................28

Caller list ....................................................28

Answering System

Answering system ......................................30

Turning the answering system on/off .........30

Greeting message ......................................30

Listening to messages ...............................31

Remote operation .......................................32

Answering system settings .........................33

Useful Information

Voice mail service ......................................35

Character entry ..........................................35

Error messages ..........................................37

Troubleshooting .........................................37

Conditions of guarantee .............................42

Index

Index...........................................................43

2

Table of Contents

TG680xE_(en)_0917_ver013.pdf 2TG680xE_(en)_0917_ver013.pdf 2 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Model composition

Series Model No.

Base unit Handset

Part No. Part No. Quantity

KX-TG6801
series

KX-TG6801 KX-TG6801 KX-TGA683 1

KX-TG6802 KX-TG6801 KX-TGA683 2

KX-TG6803 KX-TG6801 KX-TGA683 3

Accessory information

Supplied accessories

No.

Supplied handset qty.

1 unit*12 units*23 units

*3

Accessory item/Part number Accessory quantity

A AC adaptor for base unit/PNLV226EZ 1 1 1
B Telephone line cord/

PNJA1113Y (Black/for U.K.) or
PNJA1037Z (Transparence/for U.K.)

1 1 1

C

Rechargeable batteries

*4

2 4 6

D

Handset cover

*5

1 2 3

E Charger/PNLC1042ZB – 1 2
F AC adaptor for charger/PNLV233EKZ – 1 2

*1 KX-TG6801
*2 KX-TG6802
*3 KX-TG6803
*4 See page 4 for replacement battery information.
*5 The handset cover comes attached to the handset.

A B C D E F

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

3

Introduction

TG680xE_(en)_0917_ver013.pdf 3TG680xE_(en)_0917_ver013.pdf 3 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Additional/replacement accessories

Please contact your nearest Panasonic dealer for sales information.

Accessory item Model number/Specifications

Rechargeable
batteries

*1

Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
– 1.2 V
– Minimum amperage of 550 mAh

DECT repeater KX-A405, KX-A406

*1 Replacement batteries may have a different capacity from that of the supplied batteries.

We recommend using Panasonic rechargeable batteries.

Other information

R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.

Sales and support information

Customer Communications Centre

R For customers within the U.K.: 0344 844 3899
R For customers within Ireland: 01289 8333
R For further support on your product, please visit our website: www.panasonic.co.uk

Direct Sales at Panasonic U.K.

R Order accessory and consumable items for your product with ease and confidence by phoning

our Customer Communications Centre Monday - Friday 9:00am - 5:00pm (Excluding public
holidays).

R Go on line through our Internet Accessory ordering application at www.pas-europe.com
R Most major credit and debit cards accepted.
R All enquiries transactions and distribution facilities are provided directly by Panasonic U.K.
R Also available through our Internet is direct shopping for a wide range of finished products.

Take a browse on our website for further details.

shop.panasonic.co.uk/

4

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Introduction

TG680xE_(en)_0917_ver013.pdf 4TG680xE_(en)_0917_ver013.pdf 4 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

General information

R This equipment is designed for use on the U.K. and Ireland analogue telephone network.
R In the event of problems, you should contact your equipment supplier in the first instance.

Declaration of Conformity:

R Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the

essential requirements and other relevant provisions of Radio & Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are
available for download by visiting:
www.ptc.panasonic.eu

Contact to Authorised Representative:

Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany

Ecodesign information

Ecodesign information under EU Regulation (EC) No. 1275/2008 amended by (EU) Regulation
No. 801/2013. From 1 January 2015.

Please visit here: www.ptc.panasonic.eu
Click [Downloads]
a Energy related products information (Public)

Power consumption in networked standby and guidance are mentioned in the web site above.

For your future reference

We recommend keeping a record of the following information to assist with any repair under
warranty.

Serial No. Date of purchase

(found on the bottom of the base unit)

Name and address of dealer

Attach your purchase receipt here.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

5

Introduction

TG680xE_(en)_0917_ver013.pdf 5TG680xE_(en)_0917_ver013.pdf 5 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

For your safety

To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.

WARNING

Power connection

R Use only the power source marked on the

product.

R Do not overload power outlets and

extension cords. This can result in the risk
of fire or electric shock.

R Completely insert the AC adaptor/power

plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.

R Regularly remove any dust, etc. from the

AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.

R Unplug the product from power outlets if it

emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.

R Unplug from power outlets and never touch

the inside of the product if its casing has
been broken open.

R Never touch the plug with wet hands.

Danger of electric shock exists.

Installation

R To prevent the risk of fire or electrical

shock, do not expose the product to rain or
any type of moisture.

R Do not place or use this product near

automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.

R Do not allow the AC adaptor or telephone

line cord to be excessively pulled, bent or
placed under heavy objects.

Operating safeguards

R Unplug the product from power outlets

before cleaning. Do not use liquid or
aerosol cleaners.

R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,

etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.

Medical

R Consult the manufacturer of any personal

medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of

1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)

R Do not use the product in health care

facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.

CAUTION

Installation and location

R Never install telephone wiring during an

electrical storm.

R Never install telephone line jacks in wet

locations unless the jack is specifically
designed for wet locations.

R Never touch uninsulated telephone wires or

terminals unless the telephone line has
been disconnected at the network interface.

R Use caution when installing or modifying

telephone lines.

R The AC adaptor is used as the main

disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.

6

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Important Information

TG680xE_(en)_0917_ver013.pdf 6TG680xE_(en)_0917_ver013.pdf 6 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

R This product is unable to make calls when:

– the handset batteries need recharging or

have failed.
– there is a power failure.
– the key lock feature is turned on.

Battery

R We recommend using the batteries noted

on page 4. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

R Do not mix old and new batteries.
R Do not open or mutilate the batteries.

Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.

R Exercise care when handling the batteries.

Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.

R Charge the batteries provided with or

identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.

R Only use a compatible base unit (or

charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.

Important safety instructions

When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:

1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.

2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.

3. Do not use the telephone to report a gas
leak in the vicinity of the leak.

4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free

communications, place your base unit:
– at a convenient, high, and central

location with no obstructions between
the handset and base unit in an indoor
environment.

– away from electronic appliances such as

TVs, radios, personal computers,
wireless devices, or other phones.

– facing away from radio frequency

transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)

R Coverage and voice quality depends on the

local environmental conditions.

R If the reception for a base unit location is

not satisfactory, move the base unit to
another location for better reception.

Environment

R Keep the product away from electrical noise

generating devices, such as fluorescent
lamps and motors.

R The product should be kept free from

excessive smoke, dust, high temperature,
and vibration.

R The product should not be exposed to

direct sunlight.

R Do not place heavy objects on top of the

product.

R When you leave the product unused for a

long period of time, unplug the product from
the power outlet.

R The product should be kept away from heat

sources such as radiators, cookers, etc. It

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

7

Important Information

TG680xE_(en)_0917_ver013.pdf 7TG680xE_(en)_0917_ver013.pdf 7 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

should not be placed in rooms where the
temperature is less than 0 °C or greater
than 40 °C. Damp basements should also
be avoided.

R The maximum calling distance may be

shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.

R Operating the product near electrical

appliances may cause interference. Move
away from the electrical appliances.

Routine care

R Wipe the outer surface of the product

with a soft moist cloth.

R Do not use benzine, thinner, or any

abrasive powder.

Other information

CAUTION: Risk of explosion if battery is

replaced by an incorrect type. Dispose of used
batteries according to the instructions.

Notice for product disposal, transfer,
or return

R This product can store your private/

confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.

Information for Users on Collection
and Disposal of Old Equipment and
used Batteries

1

2

3

These symbols (A, B, C) on the products,
packaging, and/or accompanying documents
mean that used electrical and electronic
products and batteries should not be mixed
with general household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from inappropriate
waste handling.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste
disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.

For business users in the European
Union

If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.

Information on Disposal in other
Countries outside the European Union

These symbols (A, B, C) are only valid in
the European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the correct
method of disposal.

Note for the battery symbol

This symbol (B) might be used in
combination with a chemical symbol (C). In
this case it complies with the requirement set
by the Directive for the chemical involved.

Note for the battery removal
procedure

Refer to “Battery installation” on page 10.

8

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Important Information

TG680xE_(en)_0917_ver013.pdf 8TG680xE_(en)_0917_ver013.pdf 8 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Specifications

R Standard:

DECT (Digital Enhanced Cordless
Telecommunications),
GAP (Generic Access Profile)

R Frequency range:

1.88 GHz to 1.90 GHz

R RF transmission power:

Approx. 10 mW (average power per
channel)

R Power source:

220–240 V AC, 50/60 Hz

R Power consumption:

Base unit:

Standby: Approx. 0.8 W
Maximum: Approx. 3.1 W

Charger:

Standby: Approx. 0.12 W
Maximum: Approx. 1.8 W

R Operating conditions:

0 °C–40 °C, 20 %–80 % relative air
humidity (dry)

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

9

Important Information

TG680xE_(en)_0917_ver013.pdf 9TG680xE_(en)_0917_ver013.pdf 9 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Setting up

Connections

n Base unit

Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line jack until
you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.

Note:

R Use only the supplied Panasonic AC

adaptor PNLV226E.

R Use only the supplied telephone line cord.

4

3

5 4

2

1

n Charger

A Connect the AC adaptor plug to the

unit until you hear a click.

B Connect the AC adaptor to the power

outlet.

Note:

R Use only the supplied Panasonic AC

adaptor PNLV233E.

1

2

Battery installation

R USE ONLY rechargeable Ni-MH batteries

AAA (R03) size (1).

R Do NOT use Alkaline/Manganese/Ni-Cd

batteries.

R Confirm correct polarities (

, ).

1

R Follow the directions on the display to set

up the unit.

10

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Getting Started

TG680xE_(en)_0917_ver013.pdf 10TG680xE_(en)_0917_ver013.pdf 10 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Battery charging

Charge for about 7 hours.
R Confirm “Charging” is displayed (

1

).

R When the batteries are fully charged,

“Fully charged” is displayed.

11

Note when setting up

Note for connections

R The AC adaptor must remain connected at

all times. (It is normal for the adaptor to feel
warm during use.)

R The AC adaptor should be connected to a

vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.

During a power failure

The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a T-adaptor. Your Panasonic sales
shop can offer you more information about
connection possibilities.

Note for battery installation

R Use the supplied rechargeable batteries.

For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 7.

Note for battery charging

R It is normal for the handset to feel warm

during charging.

R Clean the charge contacts of the handset,

base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.

Battery level

Icon Battery level

High

Medium

Low

Needs charging.

Panasonic Ni-MH battery
performance (supplied batteries)

Operation Operating time

In continuous use 16 hours max.

Not in use (standby) 200 hours max.

Note:

R Actual battery performance depends on

usage and ambient environment.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

11

Getting Started

TG680xE_(en)_0917_ver013.pdf 11TG680xE_(en)_0917_ver013.pdf 11 17/9/2015 3:49:09 PM17/9/2015 3:49:09 PM

Controls

Handset

A

B

A

C

J

K

H

B

G

A

D

E

F

I

Speaker
M N (Talk)
Dial keypad
MZN (Speakerphone)
Microphone
Receiver
Display

M N (Off/Power)
MR/ECON

R: Recall/Flash
ECO: Eco mode shortcut key

M N (Intercom)
R This feature is not available for single

handset models.

Charge contacts

n Control type

Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. (Example:

, OK, etc.)

Navigator key
Navigator keys functions as follows.

{V}

{^}

{<} {>}

– MDN, MCN, MFN, or MEN: Scroll through

various lists and items.
– MDN or MCN ( ): Adjust the receiver or

speaker volume while talking.
– M

N (Caller list): View the caller list.

– MWN (Phonebook): View the phonebook

entry.
– MTN (Redial): View the redial list.

Base unit

G HF

A B EC D

Charge contacts
Speaker

M N (Locator)
R You can locate a misplaced handset

by pressing M

N.

M N (Erase)

Message counter

12

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Getting Started

TG680xE_(en)_0917_ver013.pdf 12TG680xE_(en)_0917_ver013.pdf 12 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

MjN/MkN (Volume up/down)
M

N/M N (Repeat/Skip)

M N (Play/Stop)

Message indicator
M N (Answer on)

Display icons

Handset display items

Item Meaning

Range status: The more bars
visible, the closer the handset
is to the base unit.

Out of base unit range

Paging, intercom mode

*1

Z Speakerphone is on.

(page 16)

The line is in use.
R When flashing slowly: The

call is put on hold.

R When flashing rapidly: An

incoming call is now being
received.

Missed call*2 (page 28)

The base unit transmission
power is set to “Low”.
(page 15)

The LCD backlight is off.
(page 23)

R When displayed next to the

battery icon: Answering
system is on. (page 30)

R When displayed with a

number: New messages
have been recorded.
(page 31)

“Greeting Only” is
selected. Caller messages
are not recorded.(page 34)

Battery level

Alarm is on. (page 25)

Privacy mode is on.

*1

(page 23)

Item Meaning

Ringer volume is off.
(page 22)

Nuisance call blocked.

*2

(page 25)

New voice mail message
received.*3 (page 35)

Line in
use

Someone is using the line.

*1

IN USE

Answering system is being
used by:
– another handset

*1

– the base unit.

*1 KX-TG6802/KX-TG6803
*2 Caller ID subscribers only
*3 Voice mail subscribers only

Base unit display items

Item Meaning

- - “Greeting Only” is
selected as the caller’s
recording time. In this case,
the answering system
answers calls with a greeting
message and caller
messages are not recorded.
(page 34)

Handset soft key icons

Icon Action

Returns to the previous screen or
outside call.

Displays the menu.

OK Accepts the current selection.

Makes a call. (page 16)

Temporarily turns off the ringer
for incoming calls. (page 16)

Places a call on hold.

*1

W Opens the phonebook.

Allows you to edit phone
numbers. (page 26)

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

13

Getting Started

TG680xE_(en)_0917_ver013.pdf 13TG680xE_(en)_0917_ver013.pdf 13 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Icon Action

Adds new entry. (page 20)

Displays the character entry
mode for phonebook search.
(page 19)

Turns the key lock feature off.
(page 18)

Stops alarm. (page 25)

Snooze button on the alarm.
(page 25)

Selects entries or handsets.
(page 25)

n

Stops recording or playback.

Stores phone numbers.
(page 19)

Erases the selected item.

Allows you to make an intercom
call.

*1

C Erases a number/character.

Puts the call on mute.

*1 KX-TG6802/KX-TG6803

Turning the power on/off

Press M

N for about 2 seconds.

Language setting

Display language

1 M

N#110

2 MbN: Select your desired language. a

MOKN

3 M

N

Date and time

1 M

N#101

2 Enter the current date, month, and year.

a MOKN
Example: 12 July, 2015

12 07 15

3 Enter the current hour and minute.

Example: 9:30

09 30
R You can select 24-hour or 12-hour

clock format (“AM” or “PM”) by
pressing *.

4 MOKN a M

N

Recording your greeting message

You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 30 for details.

1 M

N#302

2 MbN: “Yes” a MOKN
3 Record a greeting message. a MnN a

M

N

14

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Getting Started

TG680xE_(en)_0917_ver013.pdf 14TG680xE_(en)_0917_ver013.pdf 14 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Other settings

Eco mode setting

The MR/ECON button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”

is temporarily displayed and

is shown

on the handset display instead of

.

– When the one touch eco mode is off:

“Normal” is temporarily displayed and

goes off from the handset display.

Note:

R When there is another cordless phone

nearby and it is in use, the base unit
transmission power may not be reduced.
(KX-TG6802/KX-TG6803)

R Activating one touch eco mode reduces the

range of the base unit in standby mode.

R If you set the repeater mode to “On”

(page 27):
– One touch eco mode is cancelled.
– “Eco Setup” is not shown in the

display menu (page 23).

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

15

Getting Started

TG680xE_(en)_0917_ver013.pdf 15TG680xE_(en)_0917_ver013.pdf 15 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Making calls

1 Lift the handset and dial the phone

number.

R To correct a digit, press MCN.

2 M

N

3 When you finish talking, press M

N or

place the handset on the base unit or
charger.

Using the speakerphone

1 Dial the phone number and press MZN.
2 When you finish talking, press M

N.

Note:

R To switch back to the receiver, press MZN/

M

N.

Adjusting the receiver or speaker
volume

Press MDN or MCN repeatedly while talking.

Making a call using the redial list

The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).

1 MTN
2 MbN: Select the desired phone number.
3 M

N

Erasing a number in the redial list

1 MTN
2 MbN: Select the desired phone number.

a M

N

3 MbN: “Yes” a MOKN a M

N

Pause (for PBX/long distance service
users)

A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 20).

Example: If you need to dial the line access
number “0” when making outside calls with a
PBX:

1 0 a MDN (Pause)
2 Dial the phone number. a M

N

Note:

R A 3 second pause is inserted each time MDN

(Pause) is pressed.

Answering calls

1 Lift the handset and press M

N or MZN

when the unit rings.

2 When you finish talking, press M

N or

place the handset on the base unit or

charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 23).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M

N.

Adjusting the ringer volume

Handset

Press MDN or MCN repeatedly to select the
desired volume while ringing.

Base unit

Press MjN or MkN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold MkN

until the unit beeps.

Useful features during a call

Hold

1 Press M

N during an outside call.

2 MbN: “Hold” a MOKN
3 To release hold, press M

N.

16

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Making/Answering Calls

TG680xE_(en)_0917_ver013.pdf 16TG680xE_(en)_0917_ver013.pdf 16 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Note:

R After holding for 10 minutes, the call is

disconnected.

Mute

1 Press M

N during a call.

2 To return to the call, press M N.

Recall/flash

MR/ECON allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.

Note:

R To change the recall/flash time, see

page 23.

For call waiting or Call Waiting
Caller ID service users

To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.

If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd

caller’s information is displayed after you hear
the call waiting tone on the handset.

1 Press MR/ECON to answer the 2nd call.
2 To switch between calls, press MR/ECON.

Note:

R Please contact your phone service provider

for details and availability of this service in
your area.

Call share

Available for:

KX-TG6802/KX-TG6803

You can join an existing outside call.

To join the conversation, press M N when
the other handset is on an outside call.

Note:

R To prevent other users from joining your

conversations with outside callers, turn the
privacy mode on (page 23).

Transferring calls, conference
calls

Available for:

KX-TG6802/KX-TG6803

Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.

1 During an outside call, press M

N.

KX-TG6803:

MbN: Select the desired unit. a MOKN

2 Wait for the paged party to answer.

R If the paged party does not answer,

press M

N to return to the outside call.

3 To complete the transfer:

Press M

N.

To establish a conference call:

M

N a MbN: “Conference” a MOKN

R To leave the conference, press M

N.

The other 2 parties can continue the
conversation.

R To put the outside call on hold: M

N
a MbN: “Hold” a MOKN
To resume the conference: M

N a

MbN: “Conference” a MOKN

R To cancel the conference: M

N a

MbN: “Stop Conference” a MOKN

You can continue the conversation
with the outside caller.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

17

Making/Answering Calls

TG680xE_(en)_0917_ver013.pdf 17TG680xE_(en)_0917_ver013.pdf 17 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Intercom

Available for:

KX-TG6802/KX-TG6803

Intercom calls can be made between
handsets.

Note:

R When paging the handset, the paged

handset beeps for 1 minute.

R If you receive an outside call while talking

on the intercom, the interrupt tone sounds.
To finish intercom, press M

N. To answer

the call, press M

N.

Making an intercom call

1 M

N

KX-TG6803:
MbN: Select the desired unit. a MOKN

2 When you finish talking, press M

N.

Answering an intercom call

1 Press M

N or M N to answer the page.

2 When you finish talking, press M

N.

Key lock

The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press M

N for about 3

seconds.

R To turn key lock off, press M

N for about 3

seconds.

Note:

R Calls to emergency numbers cannot be

made until key lock is turned off.

18

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Making/Answering Calls

TG680xE_(en)_0917_ver013.pdf 18TG680xE_(en)_0917_ver013.pdf 18 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Phonebook

You can add 120 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook.

Important:

R All entries can be shared by any registered

handset.

Adding phonebook entries

1 MWN a M

N

2 MbN: “New Entry” a MOKN
3 Enter the party’s name. a MOKN

R You can change the character entry

mode by pressing MR/ECON
(page 35).

4 Enter the party’s phone number. a

MOKN 2 times a M

N

Storing a redial list number to the
phonebook

1 MTN
2 MbN: Select the desired phone number.

a M

N

3 To store the name, continue from step 3,

“Editing entries”, page 19.

Storing caller information to the
phonebook

1 M

N

2 MbN: Select the desired entry. a M

N

3 MbN: “Save CID” a MOKN
4 MbN: “Phonebook” a MOKN
5 To store the name, continue from step 3,

“Editing entries”, page 19.

Finding and calling from a
phonebook entry

1 MWN

2 To scroll through all entries

MbN: Select the desired entry.

To search by first character

Press the dial key (0 to 9, or #)
which contains the character you are
searching for (page 35).
MbN: Scroll through the phonebook if
necessary.

3 M

N

Note:

R In step 1, change the character entry mode

if necessary:

M

N a MbN: Select the character entry

mode. a MOKN

Editing entries

1 Find the desired entry (page 19). a M

N

2 MbN: “Edit” a MOKN
3 Edit the name if necessary. a MOKN
4 Edit the phone number if necessary. a

MOKN 2 times a M

N

Erasing entries

Erasing an entry

1 Find the desired entry (page 19). a M

N

2 MbN: “Erase” a MOKN
3 MbN: “Yes” a MOKN a M

N

Erasing all entries

1 MWN a M

N

2 MbN: “Erase All” a MOKN
3 MbN: “Yes” a MOKN
4 MbN: “Yes” a MOKN a M

N

Chain dial

This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

19

Phonebook

TG680xE_(en)_0917_ver013.pdf 19TG680xE_(en)_0917_ver013.pdf 19 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

PIN that you have stored in the phonebook,
without having to dial manually.

1 During an outside call, press M

N.

2 MbN: “Phonebook” a MOKN
3 MbN: Select the desired entry.
4 Press M

N (right soft key) to dial the

number.

Note:

R When storing a calling card access number

and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 16).

Speed dial

You can assign 1 phone number to each of
the dial keys (1 to 6) on the handset.

Adding phone numbers to speed
dial keys

n By entering phone numbers:

1 Press and hold the desired speed dial

key (1 to 6). a M

N

2 MbN: “Manual” a MOKN
3 Enter the party’s name (16 characters

max.). a MOKN

4 Enter the party’s phone number (24

digits max.). a MOKN 2 times a
M

N

n From the phonebook:

1 Press and hold the desired speed dial

key (1 to 6). a M

N

2 MbN: “Phonebook” a MOKN
3 MbN: Select the desired entry.
4 MOKN a M N

Note:

R If you edit a phonebook entry which is

assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.

Editing an entry

1 Press and hold the desired speed dial key

(1 to 6). a M

N

2 MbN: “Edit” a MOKN
3 Edit the name if necessary. a MOKN
4 Edit the phone number if necessary. a

MOKN 2 times a M

N

Erasing an entry

1 Press and hold the desired speed dial key

(1 to 6). a M

N

2 MbN: “Erase” a MOKN
3 MbN: “Yes” a MOKN a M

N

Viewing an entry/Making a call

1 Press and hold the desired speed dial key

(1 to 6).

2 To make a call, press M

N.

20

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Phonebook

TG680xE_(en)_0917_ver013.pdf 20TG680xE_(en)_0917_ver013.pdf 20 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Menu list

To access the features, there are 2 methods.

n Scrolling through the display menus

1 M

N

2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
3 Press MCN or MDN to select the desired item from the next sub-menus. a MOKN
4 Press MCN or MDN to select the desired setting. a MOKN

n Using the direct command code

1 M

N a Enter the desired code.

Example: Press M

N#101.

2 Select the desired setting. a MOKN

Note:

R To exit the operation, press M

N.
R In the following table, < > indicates the default settings.
R In the following table,

indicates the reference page number.

R Display menu order and sub-menu may vary depending on your model.

Display the menu tree and direct command code table

Main menu:

“Answer System”

Sub-menu 1 Sub-menu 2 Settings Code

Play New Msg.

(Msg.: message)

– – #323 31

Play All Msg.

– – #324 32

Erase All Msg.

*1

– – #325 32

Greeting

Start REC

*1

(Record greeting)

– #302 30

Play Greeting

– #303 31

Default*1

(Reset to pre-recorded
greeting)

– #304 31

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

21

Programming

TG680xE_(en)_0917_ver013.pdf 21TG680xE_(en)_0917_ver013.pdf 21 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Sub-menu 1 Sub-menu 2 Settings Code

Settings

Number of Rings

*1

2-9 Rings
<5 Rings>
Auto

#211 34

Recording Time

*1

1 Minute
<3 Minutes>
Greeting Only

*2

#305 34

Remote Code

*1

– #306 32

Call Screening

<On>
Off

#310 33

Answer On

*1

– – #327 30

Answer Off

*1

– – #328 30

Main menu: “Time Settings”

Sub-menu 1 Sub-menu 2 Settings Code

Set Date/Time

*1

– – #101 14

Memo Alarm Alarm1-3 Once

Daily
Weekly
<Off>

#720 25

Time Adjustment

*1, *3

– <Caller ID>

Manual

#226 –

Main menu: “Intercom”

*4

Operation Code

Paging the desired unit. #274 18

Main menu: “Initial Setup”

Sub-menu 1 Sub-menu 2 Settings Code

Ringer Setup

Ringer Volume
– Handset

Off-6 <6> #160 –

Ringer Volume

– Base Unit

*1

Off-6 <3> #G160 –

Ringtone

*5, *6

(Handset)

<Ringtone 1> #161 –

First Ring

*1, *7

<On>

Off

#173 –

22

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Programming

TG680xE_(en)_0917_ver013.pdf 22TG680xE_(en)_0917_ver013.pdf 22 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Sub-menu 1 Sub-menu 2 Settings Code

Time Settings

Set Date/Time

*1

– #101 14

Memo Alarm
– Alarm1-3

Once
Daily
Weekly
<Off>

#720 25

Time
Adjustment

*1, *3

<Caller ID>

Manual

#226 –

Handset Name

– – #104 26

Nuisance Call
Block

*1

Single Number

– #217 25

Range of Numbers

–

Withheld On

<Off>

#240 26

Speed Dial

– – #261 20

Eco Setup Transmission

Power

*1

<Normal>

Low

#725 15

Display Setup Backlight

<On>
Off

#276 –

Contrast

(Display contrast)

Level 1-4
<2>

#145 –

Keytones

*8

– <On>

Off

#165 –

Call Restrict

*1

– – #256 27

Auto Talk

*9

– On

<Off>

#200 16

Line Setup

Recall/Flash

*1, *10

900 msec.
700 msec.
600 msec.
400 msec.
300 msec.
250 msec.
200 msec.
160 msec.
110 msec.
<100 msec.>
90 msec.
80 msec.

#121 17

Privacy Mode

*1, *4, *11

– On

<Off>

#194 –

Base Unit PIN

*1

– <0000> #132 27

Repeater Mode

*1

– On

<Off>

#138 27

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

23

Programming

TG680xE_(en)_0917_ver013.pdf 23TG680xE_(en)_0917_ver013.pdf 23 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Sub-menu 1 Sub-menu 2 Settings Code

Register Register H.set

(H.set: handset)

– #130 41

Cancel Register

*2

– #131 41

Language Display

<English> #110 14

Main menu: “Caller List”

Operation Code

Viewing the caller list. #213 28

Main menu: “Ringer Setup”

Sub-menu 1 Sub-menu 2 Settings Code

Ringer Volume Handset

Off-6 <6> #160 –

Base Unit

*1

Off-6 <3> #G160 –

Ringtone

*5, *6

(Handset)

– <Ringtone 1> #161 –

First Ring

*1, *7

– <On>

Off

#173 –

*1 If you program these settings using one of the handsets, you do not need to program the

same item using another handset. (KX-TG6802/KX-TG6803)

*2 This menu is not displayed when scrolling through the display menus. It is only available in

direct command code.

*3 This feature allows the unit to automatically adjust the date and time each time caller

information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)

To use this feature, set the date and time first (page 14).
*4 KX-TGTG6802/KX-TG6803
*5 The ringer tone may continue to play for several seconds even if the caller has already hung

up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product (“Ringtone 3” - “Ringtone 15”) are used with

permission of © 2012 Copyrights Vision Inc.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”.

(Caller ID subscribers only)

You can only remove the first ring if the unit rings 2 times or more by default, which depends

on your phone service provider.
*8 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any

keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up

the handset to answer a call, turn off this feature.
*10 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX

supplier if necessary.

24

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Programming

TG680xE_(en)_0917_ver013.pdf 24TG680xE_(en)_0917_ver013.pdf 24 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

*11 To prevent other users from joining your conversations with outside callers, turn this feature

on.

Alarm

An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.

Important:

R Make sure the unit’s date and time setting

is correct (page 14).

1 M

N#720

2 MbN: Select the desired alarm. a MOKN
3 MbN: Select the desired alarm option. a

MOKN

“Off”

Turns alarm off. Go to step 9.

“Once”

An alarm sounds once at the set time.

“Daily”

An alarm sounds daily at the set time.
Go to step 5.

“Weekly”

Alarm sounds weekly at the set time(s).

4 Proceed with the operation according to

your selection in step 3.

n Once:

Enter the desired date and month. a
MOKN

n Weekly:

MbN: Select the desired day of the week
and press M

N. a MOKN

5 Set the desired time. a MOKN
6 Enter a text memo (10 characters max.).

a MOKN

7 MbN: Select the desired alarm tone. a

MOKN
R We recommend selecting a different

ringer tone from the one used for
outside calls.

8 MbN: Select the desired snooze setting.

a MOKN

9 MOKN a M

N

Note:

R Press M

N to stop the alarm completely.

R When the handset is in use, the alarm will

not sound until the handset is in standby
mode.

R Press any dial key or M

N to stop the

sound but keep the snooze function
activated.

R If you want to make an outside call when

the snooze function is activated, please
stop the snooze function before making the
call.

Nuisance call block

This feature blocks calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (50 max.).
– “Single Number”: The unit can block

calls from specific phone numbers.

– “Range of Numbers”: The unit can block

calls that begin with a number stored in the
call block list, such as a toll-free phone

number prefix or certain area codes.
You can also set the unit to block calls that do
not have a phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller’s phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.

Important:

R Blocked calls are logged in the caller list.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

25

Programming

TG680xE_(en)_0917_ver013.pdf 25TG680xE_(en)_0917_ver013.pdf 25 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Storing unwanted callers

Storing a single phone number

Important:

R You must include the area code when

storing phone numbers in the call block list.

n From the caller list:

1 M N
2 MbN: Select the entry to be blocked. a

M

N

3 MbN: “Save CID” a MOKN
4 MbN: “Nuisance Call Block” a

MOKN

5 MbN: “Yes” a MOKN a M

N

n By entering phone numbers:

1 M

N#217

2 MbN: “Single Number” a MOKN
3 M

N a MbN: “Add” a MOKN

4 Enter the phone number (24 digits

max.).

R To erase a digit, press MCN.

5 MOKN a M

N

Storing a range of numbers

1 M

N#217

2 MbN: “Range of Numbers” a MOKN
3 M

N a MbN: “Add” a MOKN

4 Enter the desired number (2-8 digits).

R To erase a digit, press MCN.

5 MOKN a M

N

Blocking incoming calls that
have no phone number

You can reject calls when no phone number is
provided, such as private callers.

1 M

N#240

2 MbN: Select the desired setting. a MOKN
3 M

N

Viewing/editing/erasing call
block numbers

1 M

N#217

2 MbN: “Single Number” or “Range of

Numbers” a MOKN

3 MbN: Select the desired entry.

R To exit, press M

N.

4 To edit a number:

M

N a Edit the number. a MOKN a

M

N

To erase a number:

M

N a MbN: “Yes” a MOKN a M N

Note:

R When editing, press the desired dial key to

add, MCN to erase.

Erasing all call block numbers

1 M

N#217

2 MbN: “Single Number” or “Range of

Numbers” a MOKN

3 M

N a MbN: “Erase All” a MOKN

4 MbN: “Yes” a MOKN
5 MbN: “Yes” a MOKN a M

N

Other programming

Changing the handset name

Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select

“Yes” without entering any handset name,
“Handset 1” to “Handset 3” is displayed.

1 M

N#104

2 Enter the desired name (10 characters

max.).

3 MOKN

26

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Programming

TG680xE_(en)_0917_ver013.pdf 26TG680xE_(en)_0917_ver013.pdf 26 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

4 MbN: Select the desired setting. a MOKN

2 times a M

N

Call restriction

You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.

1 M

N#256

2 Enter the base unit PIN (default: “0000”).

R If you forget your PIN, see page 38.

3 MbN: Select the handsets to be restricted.

a M

N

R “

” is displayed next to the selected

handset numbers.

R To cancel the selected handsets:

MbN: Select the handset. a Press M

N

again. “

” disappears.

4 MOKN
5 MbN: Select a memory location. a MOKN
6 Enter the phone number or area code to

be restricted (8 digits max.). a MOKN a
M

N

Changing the base unit PIN

Important:

R If you change the PIN (Personal

Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 38.

1 M

N#132

2 Enter the current 4-digit base unit PIN

(default: “0000”).

3 Enter the new 4-digit base unit PIN. a

MOKN

4 MbN: “Yes” a MOKN a M

N

Increasing the range of the base
unit

You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.

Important:

R Before registering the repeater to this base

unit, you must turn the repeater mode on.
R Do not use more than one repeater at a

time.

Setting the repeater mode

1 M

N#138

2 MbN: Select the desired setting. a MOKN

a M

N

Registering the DECT repeater
(KX-A405/KX-A406) to the base unit

Note:

R Please use a repeater that has not yet been

registered to another unit. If the repeater is

registered to another unit, deregister it first,

referring to the Installation Guide for the

DECT repeater.

1 Base unit:

Press and hold M

N for about 5 seconds.

2 DECT repeater:

Connect the AC adaptor, then wait until
the

indicator and indicator light

green.

3 Base unit:

To exit the registration mode, press M

N.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

27

Programming

TG680xE_(en)_0917_ver013.pdf 27TG680xE_(en)_0917_ver013.pdf 27 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Using Caller ID service

Important:

R This unit is Caller ID compatible. To use

Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.

Caller ID features

When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,

the following is displayed:
– “Out of Area”: The caller dials from

an area which does not provide a Caller
ID service.

– “Private Caller”: The caller

requests not to send caller information.

R If the unit is connected to a PBX system,

caller information may not be properly
received. Contact your PBX supplier.

Missed calls

If a call is not answered, the unit treats it as a
missed call and

is displayed. This lets you
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 28),

disappears from the

display. When you receive another new call,

is displayed again.

Note:

R Even when there are unviewed missed

calls,

disappears from the standby
display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit or

charger.

– Pressing M

N.

Phonebook name display

When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.

Caller list

Important:

R Make sure the unit’s date and time setting

is correct (page 14).

Viewing the caller list and calling
back

1 M

N

2 Press MCN to search from the most recent

call, or press MDN to search from the
oldest call.

3 To call back, press M

N.

To exit, press M

N.

Note:

R If

is displayed in step 2, not all of the

information is shown. To see the remaining
information, press MEN. To return to the
previous screen, press MFN.

R If the entry has already been viewed or

answered, “

” is displayed.

Editing a caller’s phone number

1 M

N

2 MbN: Select the desired entry. a M

N

3 MbN: “Edit” a MOKN
4 Edit the number.
5 M

N

28

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Caller ID Service

TG680xE_(en)_0917_ver013.pdf 28TG680xE_(en)_0917_ver013.pdf 28 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Erasing selected caller
information

1 M

N

2 MbN: Select the desired entry.
3 M

N a MbN: “Yes” a MOKN a M N

Erasing all caller information

1 M

N

2 M N a MbN: “Yes” a MOKN a M N

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

29

Caller ID Service

TG680xE_(en)_0917_ver013.pdf 29TG680xE_(en)_0917_ver013.pdf 29 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Answering system

The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting Only” as the recording
time setting (page 34).

Important:

R Make sure the unit’s date and time setting

is correct (page 14).

Memory capacity (including your
greeting message)

The total recording capacity is about 30
minutes. A maximum of 64 messages can be
recorded.

Note:

R When message memory becomes full:

– “Messages Full” is shown on the

handset display.

– The message counter on the base unit

flashes rapidly if the answering system is
turned on.

–

and the total number of new
messages are not displayed on the
handset even if the answering system is
turned on.

– If you use the pre-recorded greeting

message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.

– If you recorded your own greeting

message, the same message is still
announced to callers even though their
messages are not recorded.

Turning the answering system on/off

The answering system is preset to on.

Base unit

Press M

N to turn on/off the answering

system.

Handset

1 To turn on:

M

N#327

To turn off:

M

N#328

2 M

N

Note for base unit and handset:

R When the answering system is turned on:

– the message counter on the base unit

displays the total number of messages
(old and new).

–

is displayed on the handset.

Greeting message

When the unit answers a call, a greeting
message is played to callers .
You can use either:
– your own greeting message
– a pre-recorded greeting message

Recording your greeting message

1 M

N#302

2 MbN: “Yes” a MOKN
3 After a beep sounds, hold the handset

about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).

4 Press MnN to stop recording. a M

N

Using a pre-recorded greeting
message

The unit provides 2 pre-recorded greeting
messages:
– If you reset to pre-recorded greeting or do

not record your own greeting message, the
unit plays a pre-recorded greeting asking
callers to leave a message.

– If the message recording time (page 34)

is set to “Greeting Only”, callers’

30

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Answering System

TG680xE_(en)_0917_ver013.pdf 30TG680xE_(en)_0917_ver013.pdf 30 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.

Resetting to a pre-recorded greeting
message

If you change into a pre-recorded greeting
message once you record your own greeting
message, your own recorded greeting
message is erased.

1 M

N#304

2 MOKN a M N

Playing back the greeting
message

1 M

N#303

2 M

N

Listening to messages

Important:

R If your phone service provider offers

voicemail service, the voicemail service
may answer calls before the base unit’s
built-in answering system has a chance to
answer calls and record messages. In this
case, messages you expect to be recorded
by the answering system will be recorded
on the voicemail service. For more
information, see “For landline voice mail
service subscribers” (page 34).

Using the base unit

When new messages have been recorded,

M

N on the base unit flashes.
Press M N (PLAY).
R If new messages have been recorded, the

base unit plays back new messages.

R If there are no new messages, the base

unit plays back all messages.

Operating the answering system
during playback

Key Operation

MjN or MkN Adjust the speaker volume
M N

Repeat message

*1

M N Skip message
M N

(STOP)

Stop playback

M N

Erase currently playing
message

*1 If pressed within the first 5 seconds of a

message, the previous message is
played.

Rewinding the message

Press and hold M

N until the unit plays the

desired part of the message.
R During rewinding, the base unit makes a

continuous beeping sound. Rewinding
speed may vary depending on the recorded
message.

R At the beginning of the message, the unit

plays the message at normal speed.

Fast-forwarding the message

Press and hold M N until the unit plays the
desired part of the message.
R During fast-forwarding, the base unit makes

a continuous beeping sound.
Fast-forwarding speed may vary depending
on the recorded message.

R Even if you press and hold M N when the

end of this message is played, the next
message is played at normal speed.

Erasing all messages

Press M

N 2 times while the unit is not in use.

Using the handset

When new messages have been recorded,

is displayed on the handset with the total

number of new messages.

1 To listen to new messages:

M

N#323

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

31

Answering System

TG680xE_(en)_0917_ver013.pdf 31TG680xE_(en)_0917_ver013.pdf 31 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

To listen to all messages:

M

N#324

2 When finished, press M

N.

Note:

R To switch to the receiver, press M

N.

Operating the answering system

M

N a a MOKN

Key Operation

MDN or MCN Adjust the receiver or speaker

volume (during playback)

1 or MFN Repeat message

(during playback)

*1

2 or MEN Skip message

(during playback)

3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
M N

Pause message

*2

9 or MnN Stop recording

Stop playback

0 Turn answering system off
*4

*3

Erase currently playing
message

*5 Erase all messages
*6 Reset to a pre-recorded

greeting message

*1 If pressed within the first 5 seconds of a

message, the previous message is
played.

*2 To resume playback:

MbN: “Play” a MOKN

*3 You can also erase as follows:

M

N a MbN: “Erase” a MOKN a MbN:

“Yes” a MOKN

Calling back (Caller ID subscribers
only)

1 Press M

N during playback.

2 MbN: “Call Back” a MOKN

n Editing the number before calling back

1 Press M

N during playback.

2 MbN: “Edit & Call” a MOKN
3 Edit the number. a M

N

Erasing all messages

1 M

N#325

2 MbN: “Yes” a MOKN a M

N

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.

Remote access code

A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.

Important:

R In order to operate the answering system

remotely, you must first set a remote
access code.

1 M

N#306

2 To turn on remote operation, enter the

desired 3-digit remote access code.

3 MOKN a M

N

Deactivating remote operation

Press * in step 2 on “Remote access code”,
page 32.
R The entered remote access code is deleted.

32

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Answering System

TG680xE_(en)_0917_ver013.pdf 32TG680xE_(en)_0917_ver013.pdf 32 17/9/2015 3:49:10 PM17/9/2015 3:49:10 PM

Using the answering system
remotely

1 Dial your phone number from a

touch-tone phone.

2 After the greeting message starts, enter

your remote access code.

3 Follow the voice guidance prompts as

necessary or control the unit using
remote commands (page 33).

4 When finished, hang up.

Voice guidance

During remote operation, the unit’s voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.

Note:

R If you do not press any dial keys within 10

seconds after a voice guidance prompt, the
unit disconnects your call.

Remote commands

You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.

Key Operation

1 Repeat message

(during playback)

*1

2 Skip message

(during playback)

4 Play new messages
5 Play all messages
6 Play greeting message
7 Record greeting message
9 Stop recording

Stop playback

0 Turn answering system off
*4 Erase currently playing message
*5 Erase all messages

Key Operation

*6 Reset to a pre-recorded greeting

message (during greeting message
playback)

*# End remote operation

(or hang up)

*1 If pressed within the first 5 seconds of a

message, the previous message is
played.

Turning on the answering system
remotely

1 Dial your phone number from a

touch-tone phone.

2 Let the phone ring 20 times.

R A long beep is heard.

3 Enter your remote access code within 10

seconds after the long beep.

R The greeting message is played back.
R You can either hang up, or enter your

remote access code again and begin
remote operation (page 32).

Answering system settings

Call screening

While a caller is leaving a message, you can
listen to the call through the handset’s
speaker. To adjust the speaker volume, press
MDN or MCN repeatedly. You can answer the call
by pressing M

N on the handset. Call

screening can be set for each handset. The
default setting is “On”.

1 M

N#310

2 MbN: Select the desired setting. a MOKN

a M

N

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

33

Answering System

TG680xE_(en)_0917_ver013.pdf 33TG680xE_(en)_0917_ver013.pdf 33 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Number of rings before the unit
answers a call

You can change the “Number of Rings”
before the unit answers a call. You can select
2 to 9 rings, or “Auto”.
The default setting is “5 Rings”.
“Auto”: The unit’s answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 33), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.

1 M

N#211

2 MbN: Select the desired setting. a MOKN

a M

N

For landline voice mail service
subscribers

To receive voice mail and use answering
system properly, please note the following:
R To use the voice mail service (page 35)

provided by your phone service provider
rather than the unit’s answering system,
turn off the answering system (page 30).

R To use this unit’s answering system rather

than the voice mail service provided by
your phone service provider, please contact
your phone service provider to deactivate
your voice mail service.
If your phone service provider cannot do
this:
– Set this unit’s “Number of Rings”

setting so that this unit’s answering
system answers calls before the voice
mail service of your phone service
provider does. It is necessary to check
the number of rings required to activate
the voice mail service provided by your
phone service provider before changing
this setting.

– Change the number of rings of the voice

mail service so that the answering
system can answer the call first. To do
so, contact your phone service provider.

Caller’s recording time

You can change the maximum message
recording time allowed for each caller. The
default setting is “3 Minutes”.

1 M

N#305

2 MbN: Select the desired setting. a MOKN

a M

N

Selecting “Greeting Only”

You can select “Greeting Only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting Only” in step 2 on
“Caller’s recording time”, page 34.

Note:

R When you select “Greeting Only”:

– If you do not record your own message,

the unit will play the pre-recorded
greeting-only message asking callers to
call again later.

– If you use your own message, record the

greeting-only message asking callers to
call again later (page 30).

34

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Answering System

TG680xE_(en)_0917_ver013.pdf 34TG680xE_(en)_0917_ver013.pdf 34 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Voice mail service

Voice mail is an automatic answering service offered by your phone service provider. After you
subscribe to this service, your phone service provider’s voice mail system answers calls for you
when you are unavailable to answer the phone or when your line is busy. Messages are recorded
by your phone service provider, not your telephone.

When you have new messages,

is displayed on the handset if message indication service is

available. Please contact your phone service provider for details of this service.

Important:

R If

still remains on the display even after you have listened to new messages, turn it off by

pressing and holding # for 2 seconds.

R To use the voice mail service provided by your phone service provider rather than the unit’s

answering system, turn off the answering system (page 30). For details, see page 34.

Character entry

The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 35).
– Press MFN or MEN to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press MCN to erase the character or number highlighted by the cursor. Press and hold MCN to

erase all characters or numbers.

– Press * (Aaa) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press MEN to move the cursor to the

next space, then press the appropriate dial key.

– If you do not press any dial key within 5 seconds after entering a character, the character is

fixed and the cursor moves to the next space.

Character entry modes

The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (

),

Extended 1 (

), Extended 2 ( ), and Cyrillic ( ). When in these entry modes except

Numeric, you can select which character is entered by pressing a dial key repeatedly.

When the unit displays the character entry screen:
MR/ECON a MbN: Select a character entry mode. a MOKN

Note:

R

in the following tables represents a single space.

Alphabet character table (ABC)

z

y

1

2 3 4 5 6 7 8 9

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

35

Useful Information

TG680xE_(en)_0917_ver013.pdf 35TG680xE_(en)_0917_ver013.pdf 35 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Numeric entry table (0-9)

z

y

1

2

3

4 5 6 7 8 9

Greek character table ( )

z y

1

2 3 4 5 6 7 8 9

Extended 1 character table ( )

z

y

1

2 3 4 5 6 7 8

9

R The following are used for both uppercase and lowercase:

Extended 2 character table ( )

z

y

1

2 3 4 5 6 7 8 9

R The following are used for both uppercase and lowercase:

36

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Useful Information

TG680xE_(en)_0917_ver013.pdf 36TG680xE_(en)_0917_ver013.pdf 36 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Cyrillic character table ( )

z

y

1

2 3 4 5 6 7 8 9

Error messages

Display message Cause/solution

Base no power

or

No link.
Reconnect
AC adaptor.

R Confirm the base unit’s AC adaptor is connected to the unit

and the power outlet correctly.

R The handset has lost communication with the base unit. Move

closer to the base unit and try again.

R Unplug the base unit’s AC adaptor to reset the unit.

Reconnect the adaptor and try again.

R The handset’s registration may have been cancelled.

Re-register the handset (page 41).

Check Phone Line

R The supplied telephone line cord has not been connected yet

or not connected properly. Check the connections (page 10).

Error

R Recording was too short. Try again.

Memory Full

R The phonebook memory is full. Erase unwanted entries

(page 19).

R The call block list memory is full. Erase unwanted entries

(page 26).

Use rechargeable
battery.

R A wrong type of battery such as Alkaline or Manganese was

inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 7.

You must first
subscribe
to Caller ID.

R You must subscribe to a Caller ID service. Once you receive

caller information after subscribing to a Caller ID service, this
message will not be displayed.

Troubleshooting

If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the
handset.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

37

Useful Information

TG680xE_(en)_0917_ver013.pdf 37TG680xE_(en)_0917_ver013.pdf 37 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

General use

Problem Cause/solution

The handset does not turn
on even after installing
charged batteries.

R Place the handset on the base unit or charger to turn on the

handset.

The unit does not work. R Make sure the batteries are installed correctly (page 10).

R Fully charge the batteries (page 11).
R Check the connections (page 10).
R Unplug the base unit’s AC adaptor to reset the unit and turn off

the handset. Reconnect the adaptor, turn on the handset and
try again.

R The handset has not been registered to the base unit. Register

the handset (page 41).

The handset display is
blank.

R The handset is not turned on. Turn the power on (page 14).

I cannot hear a dial tone. R Make sure that you are using the supplied telephone line cord.

Your old telephone line cord may have a different wiring
configuration.

R The base unit’s AC adaptor or telephone line cord is not

connected. Check the connections.

R Disconnect the base unit from the telephone line and connect

the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your phone service provider.

I cannot use the intercom
feature.

R This feature is available between the handsets. Although the

handset displays “Intercom”, this feature is not available for
single handset models.

Menu list

Problem Cause/solution

The display is in a
language I cannot read.

R Change the display language (page 14).

I cannot activate the eco
mode.

R You cannot set eco mode when you set the repeater mode

“On”. If required, set the repeater mode to “Off” (page 27).

I cannot register a handset
to a base unit.

R You entered the wrong PIN. If you forget your PIN, see “I

cannot remember the PIN.” (page 38).

I cannot remember the
PIN.

R Change the PIN using the following method.

1 M

N#132

2 *7000
3 Enter the new 4-digit base unit PIN. a MOKN
4 MbN: “Yes” a MOKN a M

N

38

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Useful Information

TG680xE_(en)_0917_ver013.pdf 38TG680xE_(en)_0917_ver013.pdf 38 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Battery recharge

Problem Cause/solution

The handset beeps and/or

flashes.

R Battery charge is low. Fully charge the batteries (page 11).

I fully charged the
batteries, but
–

still flashes or

– the operating time

seems to be shorter.

R Clean the battery ends ( , ) and the charge contacts with

a dry cloth and charge again.

R It is time to replace the batteries (page 10).

Making/answering calls, intercom

Problem Cause/solution

is displayed.

R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.

Reconnect AC adaptor to the base unit.

R The handset is not registered to the base unit. Register it

(page 41).

R Activating one touch eco mode reduces the range of the base

unit in standby mode. If required, turn eco mode off (page 15).

Noise is heard, sound cuts
in and out.

R You are using the handset or base unit in an area with high

electrical interference. Re-position the base unit and use the
handset away from sources of interference.

R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a

DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.

The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 16,

22).

The base unit does not
ring.

R The ringer volume is turned off. Adjust ringer volume (page 22).

I cannot make a call. R You dialled a call restricted number (page 27).

R The key lock feature is turned on. Turn it off (page 18).

Caller ID

Problem Cause/solution

Caller information is not
displayed.

R You must subscribe to a Caller ID service. Contact your phone

service provider for details.

R If your unit is connected to any additional telephone

equipment, remove and plug the unit directly into the wall jack.

R If you use a DSL/ADSL service, we recommend connecting a

DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.

R Other telephone equipment may be interfering with this unit.

Disconnect the other equipment and try again.

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

39

Useful Information

TG680xE_(en)_0917_ver013.pdf 39TG680xE_(en)_0917_ver013.pdf 39 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Problem Cause/solution

Caller information is slow
to display.

R Depending on your phone service provider, the unit may

display the caller’s information at the 2nd ring or later. Set the
first ring to “Off” (page 22).

R Move closer to the base unit.

Time on the unit has
shifted.

R Incorrect time information from incoming Caller ID changes the

time. Set the time adjustment to “Manual” (off) (page 23).

The name stored in the
phonebook is not fully
displayed while an outside
call is being received.

R Edit the phonebook entry name to fit in 1 line of text (page 19).

Answering system

Problem Cause/solution

The unit does not record
new messages.

R The answering system is turned off. Turn it on (page 30).
R The message memory is full. Erase unwanted messages

(page 31).

R The recording time is set to “Greeting Only”. Change the

setting (page 34).

R Your phone service provider’s voice mail service may be

answering your calls before the unit’s answering system can
answer your calls. Change the unit’s number of rings setting
(page 34) to a lower value, or contact your phone service
provider .

I cannot operate the
answering system
remotely.

R The remote access code is not set. Set the remote access

code (page 32).

R You are entering the wrong remote access code. If you have

forgotten your remote access code, enter the remote access
code setting to check your current code (page 32).

R The answering system is turned off. Turn it on (page 33).

The unit does not emit the
specified number of rings.

R If the first ring is turned off, the number of rings decreases by 1

from the specified number of rings.

Liquid damage

Problem Cause/solution

Liquid or other form of
moisture has entered the
handset/base unit.

R Disconnect the AC adaptor and telephone line cord from the

base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.

Caution:

R To avoid permanent damage, do not use a microwave oven to speed up the drying process.

40

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Useful Information

TG680xE_(en)_0917_ver013.pdf 40TG680xE_(en)_0917_ver013.pdf 40 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Registering a handset to the base unit

1 Handset:

M

N#130

2 Base unit:

Press and hold M

N for about 5 seconds.

R If all registered handsets start ringing, press M

N again to stop, then repeat this step.

(KX-TG6802/KX-TG6803)

3 Handset:

MOKN a Wait until “Base PIN” is displayed. a Enter the base unit PIN (default: “0000”).
a MOKN
R If you forget your PIN, see page 38.

Deregistering a handset

1 M

N#131

R All handsets registered to the base unit are displayed.

2 MbN: Select the handset you want to cancel. a MOKN
3 MbN: “Yes” a MOKN a M

N

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

41

Useful Information

TG680xE_(en)_0917_ver013.pdf 41TG680xE_(en)_0917_ver013.pdf 41 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Conditions of guarantee

Receipt No. Date of purchase

Model No. Serial No.

This guarantee is in addition to and does not in any way affect any statutory or other rights of
consumer purchasers. If within the applicable guarantee period, the product proves to be
defective by reason of faulty design, workmanship or materials, we undertake subject to the
following conditions to have the defective product (or any part or parts there of) repaired or
replaced free of charge.

1. The product shall have been purchased and used solely within either the U.K. or Ireland
and in accordance with standard operating instructions and the technical and/or Safety
Standards required in the U.K.

2. On being found defective, please consult with the retailer from where it was purchased for
assistance.

3.

This guarantee shall not apply to damage caused through fire, accident, lightning, misuse,

wear and tear, neglect, incorrect adjustment or repair, to damage caused through
installation, adaption, modification or use in an improper manner or inconsistent with the
technical and/or safety standards required in the country where this product is used, or to
damage occurred during transit to or from the purchaser.

4. If at any time during the guarantee period any part or parts of the product are replaced
with a part or parts not supplied or approved by us or of an objective quality safe and
suitable for the product, or the product has been dismantled or repaired by any person not
authorised by us, we shall have the right to terminate this guarantee in whole or in part
immediately without further notice.

5. The purchaser’s sole and exclusive remedy under this guarantee against us is for the
repair or replacement of the product or any defective part or parts and no other remedy,
including, but not limited to, incidental or consequential damage or loss of whatsoever
nature shall be available to the purchaser.

6. This guarantee shall not apply to batteries and any other items of limited natural life.

7. Our decision on all matters relating to complaints shall be final. Any product or defective
part which has been replaced shall become our property.

8. The guarantee period applicable to this product shall be 12 months.

Please keep these operating instructions with your receipt.

Panasonic U.K. a branch of Panasonic Marketing Europe GmbH

42

Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333

Useful Information

TG680xE_(en)_0917_ver013.pdf 42TG680xE_(en)_0917_ver013.pdf 42 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

Index

A Alarm: 25

Answering calls: 16
Answering system: 30

Call screening: 33
Erasing messages: 31, 32, 33
Greeting message: 30
Greeting only: 34
Listening to messages: 31, 33
Number of rings: 34
Recording time: 34
Remote access code: 32
Remote operation: 32
Turning on/off: 30

Auto talk: 16, 23

B Battery: 10, 11
C Call restriction: 27

Call share: 17
Call waiting: 17
Call Waiting Caller ID: 17
Caller ID service: 28
Caller list: 28
Chain dial: 19
Character entry: 35
Conference calls: 17
Control type: 12

D Date and time: 14

Direct command code: 21
Display

Contrast: 23
Language: 14

E Eco mode: 15

Error messages: 37

F First ring: 22
H Handset

Deregistration: 41
Name: 26
Registration: 41

Hold: 16

I Intercom: 18
K Key lock: 18

Keytones: 23

M Making calls: 16

Missed calls: 28
Mute: 17

N Nuisance call block: 25
O OK key: 12

P Pause: 16

Phonebook: 19
PIN: 27
Power failure: 11
Power on/off: 14
Privacy mode: 23

R Recall/flash: 17

Redialling: 16
Repeater: 27
Ringer tone: 22

S Speakerphone: 16

Speed dial: 20

T Time adjustment: 23

Transferring calls: 17
Troubleshooting: 37

V Voice mail: 35

Volume

Receiver: 16
Ringer (Base unit): 16, 22
Ringer (Handset): 16, 22
Speaker: 16

43

Index

TG680xE_(en)_0917_ver013.pdf 43TG680xE_(en)_0917_ver013.pdf 43 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM

1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.

(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)

4 Read troubleshooting page in the Operating Instructions.

If your product is not working properly. . .

IMPORTANT!

If you still have any problems, please call the Panasonic
DECT Helpline

0344 844 3899 (U.K.)

01289 8333 (Ireland)

or contact us through our website:
www.panasonic.co.uk

Sales Department:

Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

© Panasonic System Networks Co., Ltd. 2015

*PNQX7757ZA*

*PNQX7757ZA*

PNQX7757ZA PP0915YK0 (E)

TG680xE_(en)_0917_ver013.pdf 44TG680xE_(en)_0917_ver013.pdf 44 17/9/2015 3:49:11 PM17/9/2015 3:49:11 PM