Panasonic KXTG6751FX Operating Instructions
Model shown is
KX-TG6711FX.
Model shown is
KX-TG6751FX.
Operating Instructions
Model No. KX-TG6711FX
KX-TG6751FX
Digital Cordless Phone
Before initial use, see “Getting Started”
on page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
To use this unit in your country, first change the unit’s region setting to match
your country (page 28). Change the unit’s display language as needed
(page 13).
(For Czech and Slovakia)
This cordless telephone is possible to use according to General licence No.:
VO-R/8/08.2005-23 (for Czech), VPR-7/2001 (for Slovakia).
TG6711_51FX(en)_0803_ver101.pdf 1 2012/08/03 11:58:55
Introduction
Accessory information ..................................3
General information ......................................4
Important Information
For your safety .............................................5
Important safety instructions ........................6
For best performance ...................................6
Other information .........................................7
Specifications ...............................................8
Getting Started
Setting up .....................................................9
Note when setting up .................................10
Controls ......................................................11
Display .......................................................12
Turning the power on/off ............................13
Initial settings .............................................13
Smart function key (Top Key) .....................14
One touch eco mode ..................................14
Wall mounting ............................................15
Making/Answering Calls
Making calls ...............................................16
Answering calls ..........................................16
Useful features during a call .......................17
Key lock ......................................................18
Power back-up operation ...........................18
Phonebook
Handset phonebook ...................................20
Copying phonebook entries .......................21
Programming
Programmable settings ..............................22
Special programming .................................26
Registering a unit .......................................29
Caller ID Service
Using Caller ID service ...............................31
Caller list ....................................................31
SMS (Short Message Service)
Using SMS .................................................33
Turning SMS on/off ....................................33
Storing SMS message centre
numbers .....................................................33
Sending a message ...................................33
Receiving a message .................................34
Other settings .............................................35
Voice Mail Service
Voice mail service ......................................36
Intercom/Locator
Intercom .....................................................37
Handset locator ..........................................37
Transferring calls, conference calls ............37
Useful Information
Character entry ..........................................38
Error messages ..........................................40
Troubleshooting .........................................41
Index
Index...........................................................45
2
Table of Contents
TG6711_51FX(en)_0803_ver101.pdf 2 2012/08/03 11:58:55
Accessory information
Supplied accessories
No. Accessory item/Part number
Quantity
KX-TG6711
KX-TG6751
A AC adaptor/PNLV226CE 1
B Telephone line cord 1
C
Rechargeable batteries
*1
2
D
Handset cover
*2
1
*1 See page 3 for replacement battery information.
*2 The handset cover comes attached to the handset.
n For KX-TG6751FX
*1
No. Accessory item/Part number Quantity
E DECT repeater/KX-TGA405EX 1
F AC adaptor for DECT repeater/PQLV219CE 1
*1 A DECT repeater (KX-TGA405EX) is supplied in this model. By installing this unit, you can
extend the range of your phone system to include areas where reception was previously not
available. Read the installation guide for the DECT repeater.
AF B C D E
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item Model number
Rechargeable
batteries
HHR-4MVE or HHR-4MVT or HHR-4MRT
*1
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
DECT repeater KX-A405
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
3
Introduction
TG6711_51FX(en)_0803_ver101.pdf 3 2012/08/03 11:58:55
Expanding your phone system
Handset (optional): KX-TGA671FX
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different
colour from that of the supplied handsets.
General information
R This equipment is designed for use on the Czech and Slovakia analogue telephone network.
R In the event of problems, you should contact your equipment supplier in the first instance.
R For use in other countries, please contact your equipment supplier.
Declaration of Conformity:
R Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Radio & Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are
available for download by visiting:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No. Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
4
Introduction
TG6711_51FX(en)_0803_ver101.pdf 4 2012/08/03 11:58:55
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
R This product is unable to make calls when:
5
Important Information
TG6711_51FX(en)_0803_ver101.pdf 5 2012/08/03 11:58:55
– the handset batteries need recharging or
have failed.
– there is a power failure.
– the key lock feature is turned on.
Battery
R We recommend using the batteries noted
on page 3. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Important safety instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as radiators, cookers, etc. It
6
Important Information
TG6711_51FX(en)_0803_ver101.pdf 6 2012/08/03 11:58:55
should not be placed in rooms where the
temperature is less than 0 °C or greater
than 40 °C. Damp basements should also
be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Information for Users on Collection
and Disposal of Old Equipment and
used Batteries
1
2
3
These symbols (A, B, C) on the products,
packaging, and/or accompanying documents
mean that used electrical and electronic
products and batteries should not be mixed
with general household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from inappropriate
waste handling.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste
disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
For business users in the European
Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other
Countries outside the European Union
These symbols (A, B, C) are only valid in
the European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the correct
method of disposal.
Note for the battery symbol
This symbol (B) might be used in
combination with a chemical symbol (C). In
this case it complies with the requirement set
by the Directive for the chemical involved.
7
Important Information
TG6711_51FX(en)_0803_ver101.pdf 7 2012/08/03 11:58:55
Specifications
R Standard:
DECT (Digital Enhanced Cordless
Telecommunications),
GAP (Generic Access Profile)
R Frequency range:
1.88 GHz to 1.90 GHz
R RF transmission power:
Approx. 10 mW (average power per
channel)
R Power source:
220–240 V AC, 50/60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.38 W
Maximum: Approx. 2.4 W
R Operating conditions:
0 °C–40 °C, 20 %–80 % relative air
humidity (dry)
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
8
Important Information
TG6711_51FX(en)_0803_ver101.pdf 8 2012/08/03 11:58:55
Setting up
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226CE.
R When mounting the unit on a wall, see
page 15.
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
“Click”
To telephone
line
DSL/ADSL filter*
“Click”
Press plug firmly.
To power outlet
IncorrectCorrect
Use only the supplied
telephone line cord.
Hook
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
Rechargeable Ni-MH ONLY
R When the language selection is
displayed, see page 13.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
9
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 9 2012/08/03 11:58:55
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 3, 6.
R Wipe the battery ends (
, ) with a dry
cloth.
R Avoid touching the battery ends (
, ) or
the unit contacts.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous use 15 hours max.
Not in use (standby) 170 hours max.
Note:
R It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge (use).
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
10
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 10 2012/08/03 11:58:55
Controls
Handset
B C
A
H
I
J
L
E
G
K
D
F
MSmart functionN (Top Key)
Smart function indicator
Secure grip
R Secure grip offers support when you
cradle the handset between your
shoulder and ear.
Speaker
M N (Speakerphone)
M N (Talk)
Dial keypad
Receiver
Display
MR/ECON
R: Recall/Flash
ECO: Eco mode shortcut key
M N (Off/Power)
Microphone
Charge contacts
n Control type
Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
– MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
–
(Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
– MFN (
: Caller list): View the caller list.
– MEN (T: Redial): View the redial list.
Base unit
BA
Charge contacts
M N (Locator)
11
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 11 2012/08/03 11:58:55
Display
Handset display items
Item Meaning
Range status: The more bars
visible, the closer the handset
is to the base unit.
Out of base unit range
Paging, intercom mode
Speakerphone is on.
(page 16)
The line is in use.
R When flashing slowly: The
call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Missed call*1 (page 31)
The base unit transmission
power is set to “Low”.
(page 15)
The LCD and key backlight is
off. (page 24)
Battery level
Alarm is on. (page 26)
Equalizer is set. (page 18)
Privacy mode is on.
(page 24)
Ringer volume is off.
(page 23)
Night mode is on. (page 27)
Blocked call*1 (page 27,
31)
New SMS message
received.*2 (page 34)
New voice mail message
received.*3 (page 36)
Line in
use
Someone is using the line.
*1 Caller ID subscribers only
*2 SMS users only
*3 Voice mail subscribers only
Handset soft key icons
Icon Action
Returns to the previous screen or
outside call.
Displays the menu.
Accepts the current selection.
Displays a previously dialled
phone number.
Makes a call. (page 16)
Temporarily turns off the ringer
for incoming calls. (page 17)
Sets 24-hour or 12-hour clock
format. (page 13)
Places a call on hold.
Opens the phonebook.
Allows you to edit phone
numbers. (page 28, 32)
Adds new entry. (page 20, 27)
Displays the character entry
mode for phonebook search.
(page 20)
Turns the key lock feature off.
(page 18)
Stops alarm. (page 26)
Snooze button on the alarm.
(page 26)
Selects a character entry mode.
Selects entries or handsets.
(page 14, 26)
Stores phone numbers.
(page 27, 32)
Inserts a dialling pause.
Erases the selected item or
returns to the outside call.
Allows you to make an intercom
call. (page 37)
12
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 12 2012/08/03 11:58:55
Icon Action
Erases a number/character.
Puts the call on mute.
Handset main menu icons
The following icons are shown when you
press
(middle soft key) in standby mode.
Icon Feature
Caller List
Time Settings
SMS (Short Message Service)
Intercom
Initial Setup
Ringer Setup
Turning the power on/off
Power on
Press M
N for about 1 second.
Power off
Press M
N for about 2 seconds.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing
, # and then the
corresponding code on the dial keypad
(page 22).
Example: Press
#101.
n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
display language and region setting.
Perform step 2 in “Display language”,
page 13, and then press
.
Continue from step 2 in “Changing the
unit’s region setting/Resetting the base
unit”, page 28.
Display language
16 display languages are available.
1 #110
2 MbN: Select your desired language. a
3 M N
Date and time
1
#101
2 Enter the current date, month, and year.
a
Example: 15 July, 2012
15 07 12
3 Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing
.
4
a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
13
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 13 2012/08/03 11:58:55
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1
#120
2 MbN: Select the desired setting.
3
a M N
Smart function key (Top Key)
The smart function key (Top Key) is located
on the top of the handset and informs you with
its flashing to allow you to activate the
following features by simply pressing this key.
n When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 16, 37)
– Stop the alarm sound. (page 26)
– Stop paging. (page 37)
n When the smart function indicator
flashes slowly in standby mode, you can:
– Read new SMS messages. (page 34)
– View the caller list when there are
missed calls. (page 31)
To activate these features, their Top key
setup must be “On”. (page 14)
Using the smart function key
(Top Key)
When the smart function indicator flashes
rapidly/slowly, press MSmart functionN.
R The above features can be activated
depending the situation.
R If you answer a call using the smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk without lifting up the
handset. If you want to perform further
operations, lift up the handset.
R When the unit has new SMS messages
and missed calls, the unit can be operated
to show the new SMS messages first and
then show the missed calls.
Note:
R While key lock is on (page 18), incoming
calls can be answered, but the following
features are disabled even when the smart
function indicator flashes slowly.
– Read new SMS messages. (page 34)
– View the caller list when there are
missed calls. (page 31)
Setting the smart function key (Top
Key Setup)
The Top key setup for the following features
must be “On”.
– “New SMS” (Default: On)
– “Missed Call” (Default: Off)
The settings can be set for each handset.
1
#278
2 MbN: Select the desired setting and press
.
R “
” is displayed next to the selected
features.
R To cancel a selected feature, press
again. “ ” disappears.
3
a M N
Note:
R If the smart function indicator flashes when
the handset is not placed on the base unit
or charger, battery consumption is faster
than usual.
One touch eco mode
If you want to activate eco mode, set the
repeater mode “Off” beforehand (page 29).
When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90 % by activating one touch
eco mode.
14
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 14 2012/08/03 11:58:55
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and
is shown
on the handset display instead of
.
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On” (page
29):
– One touch eco mode is cancelled.
– “Eco Setup” is not shown in the
display menu (page 23).
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
R Drive the screws (not supplied) into the wall.
Hook
Screws
49 mm
15
Getting Started
TG6711_51FX(en)_0803_ver101.pdf 15 2012/08/03 11:58:56
Loading...