TG5921AL_5922AL.book Page 3 Friday, February 24, 2006 3:42 PM
Introduction
Introduction
Thank you for purchasing a Panasonic cordless telephone.
We recommend keeping a record of the following information for future reference.
Serial No.Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
3
TG5921AL_5922AL.book Page 4 Friday, February 24, 2006 3:42 PM
Introduction
About these operating instructions
These operating instructions can be used for KX-TG5921/KX-TG5922.
Descriptions of the multiple handsets and charger
KX-TG5922 includes 2 handsets and a charger. Descriptions of the multiple handsets and
charger in these operating instructions are for KX-TG5922 only.
KX-TG5922
Symbols used in these operating instructions
SymbolMeaning
Example: “Ringer ID”Press {^} or {V} to select the words in quotations
shown on the display.
iProceed to the next operation.
Example: {MENU},
{Phonebook}
Example:
{MENU} i {0}{5}{2} i
Select the desired setting. i
{
Save} i{OFF}
The words in the brackets indicate button names
including soft key names (page 18) on the handset
and base unit.
Press {MENU}, then press {0}, {5}, {2}. Press {^}
or {V} to select the desired setting. Press
then press {OFF}.
{
Save},
4
TG5921AL_5922AL.book Page 5 Friday, February 24, 2006 3:42 PM
Introduction
Expanding your phone system
KX-TG5922 users can expand the system by adding an accessory handset sold
separately (max. 3 handsets).
Accessory handset (up to 1)
KX-TGA560AZ
+
5
TG5921AL_5922AL.book Page 6 Friday, February 24, 2006 3:42 PM
Introduction
Accessory information
Included accessories
1234
567
No. Accessory item
1AC adaptor for base unit11
2Telephone line cord11
3Wall mounting adaptor11
4Battery12
5Handset cover
6Charger–1
7AC adaptor for charger–1
*1 The handset cover comes attached to the handset.
*1
Quantity
KX-TG5921KX-TG5922
12
6
TG5921AL_5922AL.book Page 7 Friday, February 24, 2006 3:42 PM
Introduction
Additional/replacement accessories
Accessory itemOrder number
Rechargeable nickel metal
hydride (Ni-MH) battery
Accessory handset with charger
HeadsetKX-TCA86AL or KX-TCA92AL
*1 KX-TG5922 only
Accessory itemKX-TG5921KX-TG5922
Belt clipPQKE10396Z1PQKE10396Z2
HHR-P104
*1
KX-TGA560AZ
7
TG5921AL_5922AL.book Page 8 Friday, February 24, 2006 3:42 PM
Introduction
Important safety
11. To reduce the risk of electric shock, do
instructions
When using the product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read all instructions carefully.
2. Follow all warnings and instructions
marked on the product.
3. Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners. Use a moist cloth for
cleaning.
4. Do not use the product near water, for
example near a bathtub, wash bowl,
kitchen sink, etc.
5. Place the product securely on a stable
surface. Serious damage and/or injury
may result if the product falls.
6. Do not cover slots and openings on the
product. They are provided for
ventilation and protection against
overheating. Never place the product
near radiators, or in a place where
proper ventilation is not provided.
7. Use only the power source marked on
the product. If you are not sure of the
type of power supplied to your home,
consult your dealer or local power
company.
8. Do not place objects on the power
cord. Install the product where no one
can step or trip on the cord.
9. Do not overload power outlets and
extension cords. This can result in the
risk of fire or electric shock.
10. Never push any objects through slots
in the product. This may result in the
12. Unplug the product from power outlets
13. During thunderstorms, avoid using
14. Do not use the product to report a gas
SAVE THESE
INSTRUCTIONS
risk of fire or electric shock. Never spill
any liquid on the product.
not disassemble the product. Take the
product to an authorised service centre
when service is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the product is
subsequently used.
and take to an authorised service
centre when the following conditions
occur:
A. When the power cord is damaged
or frayed.
B. If liquid has been spilled into the
product.
C. If the product has been exposed to
rain or water.
D. If the product does not work
normally by following the operating
instructions. Adjust only controls
covered by the operating
instructions. Improper adjustment
may require extensive work by an
authorised service centre.
E. If the product has been dropped or
physically damaged.
F. If the product exhibits a distinct
change in performance.
telephones including cordless phones.
There is a risk of an electric shock from
lightning.
leak, when in the vicinity of the leak.
8
TG5921AL_5922AL.book Page 9 Friday, February 24, 2006 3:42 PM
Introduction
CAUTION:
Installation
L Never install telephone wiring during a
lightning storm.
L Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone
wires or terminals unless the telephone
line has been disconnected at the
network interface.
L Use caution when installing or modifying
telephone lines.
L Do not touch the plug with wet hands.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
Battery
To reduce the risk of fire or injury to
persons, read and follow these
instructions.
L Use only the battery(ies) specified.
L Do not dispose of the battery(ies) in a
fire. They may explode. Check with local
waste management codes for special
disposal instructions.
L Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and
may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if
swallowed.
L Exercise care when handling the
battery(ies). Do not allow conductive
materials such as rings, bracelets or
keys to touch the battery(ies), otherwise
a short circuit may cause the battery(ies)
and/or the conductive material to
overheat and cause burns.
L Charge the battery(ies) provided, or
identified for use with the product only, in
accordance with the instructions and
limitations specified in this manual.
WARNING:
L To prevent the risk of fire or electrical
shock, do not expose the product to rain
or any type of moisture.
L Unplug the product from power outlets if
it emits smoke, an abnormal smell, or
makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has stopped
emitting and contact an authorised
service centre.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of 5.76
GHz to 5.84 GHz, and the power output
is 200 mW (max.).) Do not use the
product in health care facilities if any
regulations posted in the area instruct
you not to do so. Hospitals or health care
facilities may be using equipment that
could be sensitive to external RF energy.
Notice
L Please ensure that a separate
telephone, not dependent on local
power, is available for emergency use.
L This equipment will be inoperable when
mains power fails.
9
TG5921AL_5922AL.book Page 10 Friday, February 24, 2006 3:42 PM
Introduction
L When a failure occurs which results in
the internal parts becoming accessible,
disconnect the power supply cord
immediately and return the product to an
authorised service centre.
L To minimise the possibility of lightning
damage, when you know that a
thunderstorm is coming, we recommend
that you:
– Unplug the telephone line cord from
the phone socket.
– Unplug the AC adaptor from the AC
power outlet.
L No “000” or other calls can be made
from this device during a mains power
failure.
L The earpiece on the handset is
magnetised and may retain small
metallic objects.
L This equipment has been tested and
found to comply with AS/NZS 3548:
1995 limits for electromagnetic
interference. Any modifications to any
part of the system or to any peripherals
may void the EMC compliance of the
system or the peripherals.
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
For maximum distance and noise-free
operation, we recommend the following:
L Placing the product away from electrical
appliances.
L Placing the base unit in a HIGH and
CENTRAL location with no obstructions
such as walls.
L Raising the antennas vertically.
L If you use the handset near a microwave
oven which is being used, noise may be
heard. Move away from the microwave
oven and closer to the base unit.
L If you use the handset near another
cordless phone’s base unit, noise may
be heard. Move away from the other
cordless phone’s base unit and closer to
your base unit.
Environment
L Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L The product should not be exposed to
direct sunlight.
L Do not place heavy objects on top of the
product.
L When you leave the product unused for
a long period of time, unplug the product
from the power outlet.
10
TG5921AL_5922AL.book Page 11 Friday, February 24, 2006 3:42 PM
L The product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C or greater than 40 °C. Damp
basements should also be avoided.
L The maximum calling distance may be
shortened when the product is used in
the following places: Near obstacles
such as hills, tunnels, underground, near
metal objects such as wire fences, etc.
L Operating near 5.8 GHz electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
L Wipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
Introduction
11
TG5921AL_5922AL.book Page 12 Friday, February 24, 2006 3:42 PM
Preparation
standard telephone to the same
Setting up the base unit
Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (A) and telephone
line socket (B). Connect the AC adaptor
cord by pressing the plug firmly (C).
L Use only the included Panasonic AC
adaptor PQLV1AL.
C
Hook
telephone line or to the same telephone
socket using a telephone double
adaptor.
L The unit is not designed to be used with
rotary (pulse dialling) services.
If you subscribe to an ADSL service
Please attach a noise filter (contact your
ADSL provider) to the telephone line
between the base unit and the telephone
line socket in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 25) do not
function properly.
A
(230–240 V AC,
50/60 Hz)
To socket
B
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L The unit will not work during a power
failure. We recommend connecting a
12
To socket
Noise filter
TG5921AL_5922AL.book Page 13 Friday, February 24, 2006 3:42 PM
Preparation
Setting up the handset
Connecting the charger
Available model(s):
KX-TG5922
L Use only the included Panasonic AC
adaptor KX-TCA1AL.
(230–240 V AC,
50/60 Hz)
Bottom of the charger
Hooks
Fasten the AC adaptor cord to prevent
it from being disconnected.
Battery installation/replacement
1 Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2 Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover.
B
A
Important:
L Use only the rechargeable Panasonic
battery noted on page 7.
13
TG5921AL_5922AL.book Page 14 Friday, February 24, 2006 3:42 PM
Preparation
Battery charge
Place the handset on the base unit or
charger for 7 hours before initial use.
While charging, “Charging” is displayed
and the CHARGE indicator on the base
unit lights. When the battery is fully
charged, “Charge completed” is
displayed.
Base unit:
OR
L Model shown is KX-TG5921.
Charger:
Note:
L If you want to use the unit immediately,
charge the battery for at least 15
minutes.
L To ensure that the battery charges
properly, clean the charge contacts of
the handset, base unit, and charger with
a soft, dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Available model(s):
KX-TG5922
14
Charge
contacts
TG5921AL_5922AL.book Page 15 Friday, February 24, 2006 3:42 PM
Preparation
Battery level
Battery iconBattery level
5Fully charged
6Medium
7Low
Flashing: needs to be
recharged.
8Empty
Note:
L When the battery needs to be charged,
the handset beeps intermittently while it
is in use.
Panasonic battery performance
OperationOperating time
While in use
(talking)
While not in use
(standby)
While using the
clarity booster
feature (page 21)
Up to 5 hours
Up to 11 days
Up to 3 hours
L After the handset is fully charged,
displaying “Charge completed”, it
may be left on the base unit (or charger)
without any ill effect on the battery.
L The battery level may not be displayed
correctly after you replace the battery. In
this case, place the handset on the base
unit (or charger) and let charge for 7
hours.
Note:
L Battery operating time may be
shortened over time depending on
usage conditions and surrounding
temperature.
L Battery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not in
use. Hence the longer you leave the
handset off the base unit or charger, the
less time you may actually talk using the
handset.
15
TG5921AL_5922AL.book Page 16 Friday, February 24, 2006 3:42 PM
Preparation
Controls
Base unit
BCDAEFE
A {HANDSET LOCATOR}
*1
B {1} (HANDSET LOCATOR)
C {2} (HANDSET LOCATOR)
D {3} (HANDSET LOCATOR)
*1 KX-TG5921
*2 KX-TG5922
16
GH
E Antennas
*2
*2
*2
F IN USE indicator
G Charge contacts
H CHARGE indicator
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.