Panasonic KXTG4753 User Manual
Operating Instructions
Model No. KX-TG4731
KX-TG4732
KX-TG4733
KX-TG223SK
KX-TG4734
KX-TG4784
KX-TG4741
KX-TG4742
KX-TG4743
KX-TG4744
KX-TG234SK
KX-TG4745
KX-TG235SK
KX-TG4793
KX-TG4753
KX-TG4763
Digital Cordless Answering System
Model shown is KX-TG4731.
Before initial use, see “Getting Started”
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 55.
For assistance, visit our Web site: http://www.panasonic.com/help for customers
in the U.S.A. or Puerto Rico.
Please register your product: http://www.panasonic.com/prodreg
TG47xx(en-en)_1118_ver022.pdf 1 2011/11/18 10:26:16
Introduction
Model composition .......................................3
Accessory information ..................................4
Important Information
For your safety .............................................7
Important safety instructions ........................8
For best performance ...................................8
Other information .........................................9
Specifications .............................................10
Getting Started
Setting up ...................................................11
Note when setting up .................................12
Intelligent eco mode ...................................12
Controls ......................................................13
Belt clip .......................................................14
Display .......................................................15
Initial settings .............................................15
Making/Answering Calls
Making calls ...............................................17
Answering calls ..........................................18
Useful features during a call .......................18
Shared Phonebook
Shared phonebook .....................................21
Programming
Programmable settings ..............................24
Special programming .................................29
Registering a unit .......................................31
Caller ID Service
Using Caller ID service ...............................32
Caller list ....................................................33
Answering System
Answering system ......................................35
Turning the answering system on/
off ...............................................................35
Greeting message ......................................36
Listening to messages using the base
unit .............................................................36
Listening to messages using the
handset ......................................................36
Remote operation .......................................37
Answering system settings .........................39
Voice Mail Service
Voice mail service ......................................41
Intercom/Locator
Intercom .....................................................43
Handset locator ..........................................43
Transferring calls, conference calls ............43
Useful Information
Wall mounting ............................................45
Error messages ..........................................47
Troubleshooting .........................................48
FCC and other information .........................52
Guía Rápida Española
Guía Rápida Española ...............................55
Appendix
Customer services .....................................59
Warranty (For United States and Puerto
Rico) ...........................................................60
Index
Index...........................................................62
2
Table of Contents
TG47xx(en-en)_1118_ver022.pdf 2 2011/11/18 10:26:16
Model composition
n KX-TG4731 series n KX-TG4741 series
R Model shown is KX-TG4732. R Model shown is KX-TG4742.
n KX-TG4751 series n KX-TG4761 series
R Model shown is KX-TG4753. R Model shown is KX-TG4763.
Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TG4731
series
KX-TG4731 KX-TG4731 KX-TGA470 1
KX-TG4732 KX-TG4731 KX-TGA470 2
KX-TG4733 KX-TG4731 KX-TGA470 3
KX-TG223SK KX-TG4731 KX-TGA470 3
KX-TG4734 KX-TG4731 KX-TGA470 4
KX-TG4784 KX-TG4731 KX-TGA470 4
KX-TG4741
series
KX-TG4741 KX-TG4741 KX-TGA470 1
KX-TG4742 KX-TG4741 KX-TGA470 2
KX-TG4743 KX-TG4741 KX-TGA470 3
KX-TG4744 KX-TG4741 KX-TGA470 4
KX-TG234SK KX-TG4741 KX-TGA470 4
KX-TG4745 KX-TG4741 KX-TGA470 5
KX-TG235SK KX-TG4741 KX-TGA470 5
KX-TG4793 KX-TG4741 KX-TGA470 3
For assistance, please visit http://www.panasonic.com/help
3
Introduction
TG47xx(en-en)_1118_ver022.pdf 3 2011/11/18 10:26:16
Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TG4751
series
KX-TG4753
*1
KX-TG4731 KX-TGA470 3
KX-TG4761
series
KX-TG4763
*1
KX-TG4741 KX-TGA470 3
*1 A range extender (KX-TGA405) is supplied in this model. By installing this unit, you can
extend the range of your phone system to include areas where reception was previously not
available. Read the installation guide for the range extender.
Feature differences
Series Base unit keypad/sp-phone
Intercom
*1
«
*2
KX-TG4731 series
KX-TG4751 series
– –
KX-TG4741 series
KX-TG4761 series
*1 Single handset models: Intercom calls can be made between handsets by purchasing and
registering one or more optional handsets (page 6).
*2 Intercom calls can be made between the base unit and handset.
Accessory information
Supplied accessories
No.
Supplied handset qty.
1 unit*12 units*23 units*34 units*45 units
*5
Accessory item/
Order number
Accessory quantity
A AC adaptor/PNLV226Z 1 2 3 4 5
B Telephone line cord/
PQJA10075Z
1 1 1 1 1
C Wall mounting adaptor/
PNKL1001Y1
1 1 1 1 1
D Rechargeable batteries/
HHR-4DPA
2 4 6 8 10
E
Handset cover*6/
PNYNTGA470BR
1 2 3 4 5
F Belt clip/PNKE1132Z1 1 2 3 4 5
G Charger/PNLC1029ZB – 1 2 3 4
4
For assistance, please visit http://www.panasonic.com/help
Introduction
TG47xx(en-en)_1118_ver022.pdf 4 2011/11/18 10:26:16
*1 KX-TG4731/KX-TG4741
*2 KX-TG4732/KX-TG4742
*3 KX-TG4733/KX-TG223SK/KX-TG4743/KX-TG4753/KX-TG4763/KX-TG4793
*4 KX-TG4734/KX-TG4744/KX-TG234SK/KX-TG4784
*5 KX-TG4745/KX-TG235SK
*6 The handset cover comes attached to the handset.
n For KX-TG4751/KX-TG4761 series
No. Accessory item/Order number Quantity
H Range extender/KX-TGA405 1
I AC adaptor for range extender/PQLV219Y 1
AI B C D E
F G H
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 59).
Accessory item Order number
Rechargeable
batteries
HHR-4DPA
*1
R To order, please call 1-800-332-5368 or visit
http://www.panasonic.com/batterystore
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptor KX-J66
Range extender
KX-TGA405
*2
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
visit our Web site:
http://www.panasonic.com/RangeExtender
For assistance, please visit http://www.panasonic.com/help
5
Introduction
TG47xx(en-en)_1118_ver022.pdf 5 2011/11/18 10:26:16
Expanding your phone system
Optional handset feature overview
Handset (optional): KX-TGA470
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color
from that of the supplied handsets.
6
For assistance, please visit http://www.panasonic.com/help
Introduction
TG47xx(en-en)_1118_ver022.pdf 6 2011/11/18 10:26:16
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at
1-800-211-PANA (1-800-211-7262).
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
R This product is unable to make calls when:
For assistance, please visit http://www.panasonic.com/help
7
Important Information
TG47xx(en-en)_1118_ver022.pdf 7 2011/11/18 10:26:16
– the handset batteries need recharging or
have failed.
– there is a power failure.
Battery
R We recommend using the batteries noted
on page 5. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
Important safety instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
8
For assistance, please visit http://www.panasonic.com/help
Important Information
TG47xx(en-en)_1118_ver022.pdf 8 2011/11/18 10:26:16
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
ENERGY STAR
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S.
registered mark.
For assistance, please visit http://www.panasonic.com/help
9
Important Information
TG47xx(en-en)_1118_ver022.pdf 9 2011/11/18 10:26:16
Specifications
R Standard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.9 W
Maximum: Approx. 3.8 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 2.0 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
10
For assistance, please visit http://www.panasonic.com/help
Important Information
TG47xx(en-en)_1118_ver022.pdf 10 2011/11/18 10:26:17
Setting up
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226.
n Base unit
Correct
Incorrect
To power outlet
Press plug firmly.
Hook
“Click”
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter*
“Click”
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
n Charger
To power outlet
Hooks
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
Rechargeable Ni-MH ONLY
R When the date and time setting is
displayed, see page 15.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm
“Charging”
is displayed.
For assistance, please visit http://www.panasonic.com/help
11
Getting Started
TG47xx(en-en)_1118_ver022.pdf 11 2011/11/18 10:26:17
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
R The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC adaptor)
to the same telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 5).
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 5, 8.
R Wipe the battery ends (
, ) with a dry
cloth.
R Avoid touching the battery ends (
, )
or the unit contacts.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon Battery level
High
Icon Battery level
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous use
13 hours max.
*1
Not in use (standby)
11 days max.
*1
*1 If Eco mode is on.
Note:
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
Intelligent eco mode
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
R When this feature is activated, is
displayed.
R Eco mode is turned off when the clarity
booster is activated (page 20).
12
For assistance, please visit http://www.panasonic.com/help
Getting Started
TG47xx(en-en)_1118_ver022.pdf 12 2011/11/18 10:26:17
Controls
Handset
A
B
A
D
E
I
J
K
L
H
M
B
C
F
G
Ringer indicator
Message indicator
Speaker
MjN/MkN (VOL.: Volume up/down)
M N (SP-PHONE: Speakerphone)
M N (TALK)
Headset jack
Dial keypad (*: TONE)
Receiver
Display
MCALL WAITNMFLASHN
MOFFN
Microphone
Charge contacts
n Control type
Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
– MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
–
(Volume: MDN or MCN): Adjust the
receiver or speaker volume while
talking.
– MFN CID (Caller ID): View the caller list.
– MEN REDIAL: View the redial list.
Base unit
n KX-TG4731/KX-TG4751 series
(page 3)
A BC
EF
D
GHI
Charge contacts
Speaker
Message counter
MERASEN
MnN (STOP)
MjN/MkN (VOL.: Volume up/down)
M N/M N (Repeat/Skip)
For assistance, please visit http://www.panasonic.com/help
13
Getting Started
TG47xx(en-en)_1118_ver022.pdf 13 2011/11/18 10:26:17
M N (PLAY)
Message indicator
MLOCATORN
MANSWER ON/OFFN
ANSWER ON/OFF indicator
n KX-TG4741/KX-TG4761 series
(page 3)
A
B
M
N
O
J
K
C
E
F
D
G
H
I
L
Charge contacts
Speaker
MHOLDN MCONFN (Conference)
MREDIALN MPAUSEN
MFLASHN MCALL WAITN
MSP-PHONEN (Speakerphone)
SP-PHONE indicator
MERASEN MMUTEN
MANSWER ON/OFFN
ANSWER ON/OFF indicator
MLOCATORN MINTERCOMN
MnN (STOP)
M N (PLAY)
Message indicator
MjN/MkN (VOL.: Volume up/down)
M N/M N (Repeat/Skip)
Message counter
Microphone
Dial keypad (*: TONE)
Belt clip
n To attach n To remove
14
For assistance, please visit http://www.panasonic.com/help
Getting Started
TG47xx(en-en)_1118_ver022.pdf 14 2011/11/18 10:26:17
Display
Handset display items
Item Meaning
Within base unit range
Out of base unit range
The line is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Eco mode is on. (page 12)
Equalizer is set. (page 20)
Speakerphone is on.
(page 17)
Ringer volume is off.
(page 26)
Silent mode is on. (page 29)
Call sharing mode is off.
(page 27)
Alarm is on. (page 29)
Handset number
Battery level
Blocked call (page 30)
Clarity booster is on.
(page 20)
In use
Answering system is being
used by another handset*1 or
the base unit.
Line in
use
Someone is using the line.
*1 KX-TG4741/KX-TG4761 series: page 3
Base unit display items
Item Meaning
“Greeting only” is selected
as the caller’s recording time.
In this case, the answering
system answers calls with a
greeting message and caller
messages are not recorded.
(page 39)
Initial settings
n Direct command code:
Programmable settings can be accessed
by pressing MMENUN, # and then the
corresponding code on the dial keypad
(page 24).
Example: Press MMENUN#101.
n Symbol meaning:
Symbol Meaning
Example:
MbN: “Off”
Press MCN or MDN to select the
words in quotations.
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MSELECTN, then
proceed to step 2.
1 MMENUN#101
2 Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2012
07 15 12
3 MOKN
4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5 MAM/PMN: Select “AM” or “PM”.
6 MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
15
Getting Started
TG47xx(en-en)_1118_ver022.pdf 15 2011/11/18 10:26:17
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Display language
You can select either “English” or
“Español”as the display language. The
default setting is “English”.
1 MMENUN#110
2 MbN: Select the desired setting. a
MSAVEN
3 MOFFN
Voice guidance language
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
1 MMENUN#112
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 MMENUN#120
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
16
For assistance, please visit http://www.panasonic.com/help
Getting Started
TG47xx(en-en)_1118_ver022.pdf 16 2011/11/18 10:26:17
Making calls
Using the handset
1 Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press M N or MCALLN.
3 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1 Dial the phone number and press M
N.
R Speak alternately with the other party.
2 When you finish talking, press MOFFN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M
N/
M
N.
Adjusting the receiver or speaker
volume
Press MjN or MkN repeatedly while talking.
Note:
R There are 5 volume levels (1 to 5) for the
receiver. When you change the receiver
volume to level 5 (maximum level), the
volume returns to level 4 (default) after you
hang up.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 MREDIALN or MEN REDIAL
R If there is a new message in the voice
mail or answering system, MREDIALN
is not displayed.
2 MbN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1 MREDIALN or MEN REDIAL
2 MbN: Select the desired phone number.
a MERASEN
3 MbN: “Yes” a MSELECTN
4 MOFFN
Using the base unit
Available for:
KX-TG4741/KX-TG4761 series (page 3)
1 MSP-PHONEN
2 Dial the phone number.
3 When the other party answers, speak into
the microphone.
R Speak alternately with the other party.
4 When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MSP-PHONEN on the base unit with the
call sharing mode on (page 27).
– If the handset is on the base unit, simply
lift it.
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Redialing the last number dialed
MSP-PHONEN a MREDIALN
Pause (for PBX/long distance
service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 23).
For assistance, please visit http://www.panasonic.com/help
17
Making/Answering Calls
TG47xx(en-en)_1118_ver022.pdf 17 2011/11/18 10:26:17
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
Handset
1 9 a MPAUSEN
2 Dial the phone number. a M
N
Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
1 MSP-PHONEN
2 9 a MPAUSEN
3 Dial the phone number.
Note for handset and base unit:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press M
N or M N
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
2 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M
N. To turn this feature
on, see page 26.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
n Programming the volume beforehand:
1 MMENUN#160
2 MbN: Select the desired volume.
3 MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call, you can
turn the ringer off temporarily by pressing M
N.
Adjusting the base unit ringer
volume
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Using the base unit
Available for:
KX-TG4741/KX-TG4761 series (page 3)
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1 Press MSP-PHONEN when the unit rings.
2 Speak into the microphone.
3 When you finish talking, press
MSP-PHONEN.
Useful features during a call
Hold
This feature allows you to put an outside call
on hold.
Handset
1 Press MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold, press M
N.
R Another handset user can take the call
by pressing M
N.
18
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
TG47xx(en-en)_1118_ver022.pdf 18 2011/11/18 10:26:17
R The base unit user can take the call by
pressing MSP-PHONEN.
*1
*1 KX-TG4741/KX-TG4761 series: page 3
Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press MHOLDN during an outside call.
2 To release hold, press MSP-PHONEN.
R A handset user can take the call by
pressing M
N.
Note for handset and base unit:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the ringer indicator on the handset flashes
rapidly. After 1 additional minute on hold,
the call is disconnected.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
Handset
1 Press MMUTEN during conversation.
R MMUTEN flashes.
2 To return to the conversation, press
MMUTEN again.
Note:
R MMUTEN is a soft key visible on the handset
display during a call.
Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press MMUTEN during conversation.
R The SP-PHONE indicator flashes.
2 To return to the conversation, press
MMUTEN again.
Flash
Handset / Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 27.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the
handset that is in use after you hear the call
waiting tone.
Handset / Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press MCALL WAITN to answer the 2nd
call.
2 To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
For assistance, please visit http://www.panasonic.com/help
19
Making/Answering Calls
TG47xx(en-en)_1118_ver022.pdf 19 2011/11/18 10:26:17
Handset / Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
Press * (TONE) before entering access
numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on, is
displayed.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1 Press MMENUN while talking.
2 MbN: “Equalizer” a MSELECTN
3 MbN: Select the desired setting.
4 Press MOKN to exit.
Note:
R When this feature is activated,
is
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Call share
You can join an existing outside call.
Handset
To join the conversation, press M
N when
the other unit is on an outside call.
Base unit
*1
*1 KX-TG4741/KX-TG4761 series: page 3
To join the conversation, press MSP-PHONEN
when the handset is on an outside call.
Note for handset and base unit:
R A maximum of 4 parties (including 1 outside
party) can join a conversation using 3
extensions. (4-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 27).
20
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
TG47xx(en-en)_1118_ver022.pdf 20 2011/11/18 10:26:17
Loading...