How it Works
Panasonic
Loading...
JT-H320HT-E1

Panasonic JT-H320HT-E1, JT-H320HT-E2 Operating Instructions Manual

Operating Instructions
Handheld Computer
Model No.
JT-H320HT-E1 JT-H320HT-E2
Contents
Getting Started
Warranty Policy ................................3
Names of Parts and Their Functions
Operation
Charge the Unit .............................. 14
Appendix
About Connection with Another Device
Troubleshooting ..............................19
Getting Started Operation Appendix
.....9
...17
Before operating this product, please read these instructions carefully and save this document for future use.
Read Me First
Thank you for purchasing the Panasonic Handheld Computer. These operating instructions describe the instructions for the Handheld Computer. Before connecting, operating or adjusting this product, please read these instructions completely, and save this manual for future use.
Hereby, we declare that this Handheld Computer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at http://www.doc.panasonic.de/
Importer’s name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F. R. Germany
2
Laser
CAUTION: Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.
Class 2 Laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring into the beam directly. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner (Laser Module or Laser Marker output window)
Warranty Policy
Getting Started
The warranty period and what is covered are according to applications, contracts or distributors. Please ask our sales representative.
Note:
The following damages are not covered by the warranty. – Any secondary damages, including without limitation, business chances. – Any damages by user including dropping, water contact or any other wrong use, other
than the purpose designed for.
3
Safety Precautions
To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit.
This section explains the graphic symbols used in this manual.

Denotes a potential hazard that could result in serious
WARNING
CAUTION
Handheld computer : JT-H320HT-E1, JT-H320HT-E2
injury or death.
Denotes hazards that could result in minor injury or damage to the unit.
WARNING
Do not stare into the beam directly.
There is the risk of damage to the eyes when prolonged directly viewing.
Do not operate this product during walking, bicycle riding, or car driving.
There is the risk of falling or a traffic accident.
Do not put this product close to a medical equipment. (Do not bring this product into operating room, intensive care units (ICU) and coronary care units (CCU))
Do not use this equipment close to an automatic control equipment like an automatic door fire alarm and so on.
Radio waves from this equipment may cause the trouble by a malfunction for medical equipment or automatic equipment.
CAUTION
Do not put this product on an unstable place.
This can cause damage to the unit or injury by falling.
Do not put this product on a place with moisture, dirt, greasy fumes, or steam.
There is the risk of injury.
Do not look inside the code reading portion or aim that area at people.
There is the risk of damage to the eyes when directly viewing of white light for a long time.
Do not hold this product for too long when the power is on.
There is the risk of a serious low-temperature burn.
4
Battery pack : JT-H320BT-E1
WARNING
This battery pack is designed for the specified handheld computers. Do not use the battery pack with any other device. Use the specified device to charge the battery pack.
There is the risk of heat generation, fire, or explosion.
Do not throw the battery pack into fire or heat the battery pack. The same applies to the used battery pack.
There is the risk of heat generation, fire, or explosion.
Do not insert sharp objects into the battery pack, apply impact on the battery pack, or disassemble/modify the battery pack. The same applies to the used battery pack.
There is the risk of heat generation, fire, or explosion.
Do not short positive (+) and negative (–) contact. Dispose of the used battery pack after insulating positive (+) and negative (–) contacts by friction tape.
There is the risk of heat generation, fire, or explosion.
Do not carry or store the battery pack along with articles such as necklaces or hairpins.
There is the risk of heat generation, fire, or explosion.
Do not charge, use, or leave the battery pack where temperatures are high such as a place close to fire or a place under the hot sun. The same applies to the used battery pack.
There is the risk of heat generation, fire, or explosion.
Do not splash water on the battery pack or moisten the battery pack with water.
There is the risk of heat generation, fire, or explosion.
If the battery pack leaks liquid or smells, do not bring the battery pack close to fire.
There is the risk of heat generation, fire, or explosion.
Do not touch the electrolyte leaked from the battery pack.
Entry of the electrolyte into an eye may lead to blindness. In such a case, rinse the affected eye thoroughly with clean water, and then seek medical attention immediately.
Do not put the battery pack into a microwave oven or a pressurized chamber.
There is the risk of heat generation, fire, or explosion.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Getting Started
5
Precautions for Use
Observe the following to use this product correctly.
Handheld computer
Do not open or modify the main unit case.

Battery pack
The battery pack is a consumable. The battery life, which varies with using conditions,

is approximately a year as a guideline, and after a year or approximately over 300 times of recharging, the recharging capability becomes weak. If the battery is exhausted in a short time after full recharging, replace the battery pack with new one. Be sure to use the specified battery pack.

Do not touch the contact portions of the battery pack. Failure to observe this may cause

poor contact. Leaving this product for a long time after recharging reduces the battery capacity even if

the power is turned off. Recharge the battery pack at ambient temperatures from 5 °C to 35 °C. When the

temperature exceeds the ambient charging temperature, charging stops and the indicator goes out. Store the battery pack at ambient temperatures from -20 °C to 35 °C. Recharging or

storing the battery pack outside of the specified temperatures reduces the performance and life of the battery pack. Charge the battery pack before use.

When the terminal of the battery pack becomes dirty, use a dry soft cloth to clean the

terminal. Failure to observe this may cause poor contact with the device and cut power supply. Once the terminal of the battery pack is clogged with foreign matter, the matter is hard

to be removed, resulting in damage to the device. If an anomaly such as heat generation, deformation, and abnormal odor is detected with

respect to the battery pack, do not use the battery pack. If recharging is not completed after the specified recharging time has passed, remove

the battery pack from the device. The battery pack protection device may be damaged. The rechargeable battery to be used to operate this product is a lithium-ion battery.

Do not dispose of but recycle no longer needed batteries to protect precious resources.

Operating environment and service place
Do not leave this product in a place exposed to high temperature or excessive dust.

Condensation may occur when this product is moved from a cold place to a warm place.

In case of condensation, do not use this product until water droplets disappear. Do not put this product where static is likely to be generated (such as a carpeted place)

or where magnetism generating devices such as a TV set and a radio are nearby. Do not leave this product under direct sunshine or at excessive high or low

temperatures for a long time. Protect this product from rain or water.

6
Drop impact/damage
Handle this product with care because this product is precision equipment. Do not apply

impact on this product, drop this product, or put a heavy object on this product. Do not damage the scanner reading portion.

System operation
Be sure to turn off the power before battery pack replacement.

How to care
Be sure to turn off the power before taking care of this product.

Use a dry soft cloth to remove dirt from this product. When stubborn stains are

observed, use a tightly twisted water soaked cloth to wipe the point softly and use dry another cloth to wipe the point again. Do not use thinner, benzene, wax, kerosene, soap, polish, hot water, chemical cloth,

and the like. Use a dry soft cloth to clean the scanner reading portion depending on the level of dirt.

The dirty reading portion may cause barcode reading failure.

When the scanner is cleaned, the wiping direction shall be vertical to the scanner

reading portion. The dirty connector may cause communication failure.

Use a dry soft cloth to clean the power feeding terminal depending on the level of dirt.

The dirty terminal may cause failure in charging the mobile terminal.

Touch panel
Use a finger or the supplied touch pen to enter data on the touch panel. Do not apply

excessive load to the touch panel. Do not use a sharp-pointed hard object (ex. ballpoint pen and mechanical pencil) to operate the touch panel.
Getting Started
7
Confirmation of Accessories
Before using, check the following accessories.
In case some items are missing, contact your dealer.

■Main unit
■Strap ■Battery Pack (
JT-H320BT-E1
)
■Stylus ■Operating Instructions (this document)
8
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use