Panasonic JS-970WPX01X, JS-970WPX14X, JS-970WPX05X, JS-970WPX11X, JS-970WPX02X Operating Instructions Manual

Operating Instructions

POS Workstation

English Deutsch Français Español Русский

JS-970WP

(Panel)

Model No.

JS-970

JS-970WS

(Upright)

Series

Before operating this product, please read the instructions carefully and save this
manual for future use.

For USA

For USA
Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

This unit must be connected to a grounded power outlet.

Battery

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate
Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/Perchlorate.

For CANADA

For CANADA
This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

This unit must be connected to a grounded power outlet.

Cette unité doit être branchée sur une prise de courant mise à la terre.

2

For USA / CANADA

A lithium ion battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.

L’appareil que vous vous êtes procuré est alimenté par une batterie au
lithium-ion.
Pour des renseignements sur le recyclage de la batterie, veuillez composer le
1-800-8-BATTERY.

For EU

English

Warning :

This is a class A product. In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures.

This unit must be connected to a grounded power outlet.

Deutsch [German]

Warnung :

Dies ist ein Produkt der Klasse A. Wenn im Heim betrieben, kann das Produkt
Hochfrequenzstörungen verursachen, gegen die der Benutzer u.U. geeignete Maßnahmen treffen
muss.

Dieses Gerät muss an eine vorschriftsmäßig geerdete Netzsteckdose angeschlossen werden.

Français [French]

Avertissement :

Il s’agit d’un produit de classe A. Dans un environnement privé, ce produit risque de créer des
interférences radio auquel cas des mesures correctives adéquates peuvent être exigées de la part
de l’utilisateur.

Cette unité doit être branchée sur une prise de courant mise à la terre.

Česky [Czech]

Upozornění :

Toto je výrobek třídy A. Ve vnitřním prostředí může tento výrobek způsobovat rádiové rušení.
V takovém případě může být požadováno, aby uživatel přijal příslušná opatření.

Dansk [Danish]

Advarsel :

Dette er et klasse-A produkt. I hjemmeomgivelser kan dette produkt forårsage radiostøj, i hvilket
tilfælde brugeren kan være nødsaget til at træffe fyldestgørende forholdsregler.

3

For EU

Suomi [Finnish]

Varoitus :

Tämä on luokan A tuote. Kotiympäristössä tämä tuote saattaa aiheuttaa häiriöitä radiolähetyksiin,
jolloin käyttäjän tulee kenties suorittaa asianmukaiset toimenpiteet.

Laite on liitettava suojamaadoituskoskettimilla varustettuun pistorasiaan.

Norsk [Norwegian]

Advarsel :

Dette er et klasse A produkt. Ved innendørs bruk kan dette produktet forårsake radiointerferens.
I slike tilfeller kan det være nødvendig for brukeren å treffe nødvendige tiltak.

Apparatet ma tilkoples jordet stikkontakt.

Svenska [Swedish]

Varning :

Detta är en klass A produkt. I inomhusmiljö kan denna produkt orsaka radiostörningar. I sådant fall
åligger det användaren att vidta lämpliga åtgärder.

Apparaten skall anslutas till jordat uttag.

Slovenčina [Slovak]

Upozornenie :

Toto je výrobok triedy A. Vo vnútornom prostredí môže tento výrobok spôsobovať rádiové rušenie.
V takom prípade môže byť požadované, aby používateľ prijal príslušné opatrenia.

Italiano [Italian]

Attenzione :

Questo è un prodotto di classe A. In ambiente domestico, questo prodotto può causare interferenze
radio, nel qual caso può essere necessario che l’utente adotti misure adeguate.

Español [Spanish]

Aviso :

Éste es un producto de clase A. En la instalación en una vivienda, este producto puede causar
interferencias de radio, en cuyo caso puede resultar necesario que el usuario tome medidas
pertinentes.

4

Esta unidad deberá conectarse a una toma de corriente conectada a tierra.

Nederlands [Dutch]

Waarschuwing :

Dit is een Klasse A product. In een huiselijke omgeving kan dit product radiostoring veroorzaken, in
welk geval de gebruiker verplicht kan zijn afdoende tegenmaatregelen te nemen.

Português [Portuguese]

Advertência :

Este é um produto da classe A. Quando este produto for utilizado num ambiente doméstico, poderá
provocar interferências radiofónicas e, neste caso, pode ser necessário que o utilizador tome as

providências adequadas.

Importer’s name and address to follow EU rules:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, D-22525 Hamburg, Germany

For Arabic Countries

[Arabic]

For Russia

Русский [Russian]

Предупреждение :

Это изделие класса А. В домашних условиях данное изделие может вызвать радиопомехи, что
может требовать от пользователя принятия соответствующих мер.

Это устройство необходимо подсоединять к заземленной сетевой розетке.

ВНИМАНИЕ! Настоящее изделие (аппарат, оборудование) удовлетворяет нормам
индустриальных радиопомех, установленным для оборудования класса А по TP TC 020/2011,
и не должно применяться в жилых, коммерческих зонах и производственных зонах с малым
энергопотреблением и подключаться к низковольтным распределительным электрическим
сетям

5

For Russia

ИНФОРМАЦИЯ О СЕРТИФИКАЦИИ ПРОДУКЦИИ

Рабочие станции (РOS Workstation) модели JS-970Wxxxxx
(где “x” =0-9, А-Z или пробел) с торговой маркой Panasonic

Орган по сертификации: Орган по сертификации средств

информатизации АНО "СЕРТИНФО''

Аттестат рег. № РОСС RU.0001.11ME06
Сертификат соответствия: RU C-JP. ME06.B.01337
Сертификат соответствия выдан: 12.11.2014
Сертификат соответствия действителен до: 12.11.2019

Изготовлено:

Panasonic System Networks Co., Ltd. , 4-1-62

Minoshima,Hakata-ku,Fukuoka-shi,Fukuoka,812-8531 Япония

На заводах:

1. Tech-Front (Shanghai) Computer Co., Ltd.

No.2, Lane 58, Sanzhuang Rd., Songjiang Export Processing Zone, Shanghai 201613,
P.R. CHINA, китай

2. Tech-Com (Shanghai) Computer Co., Ltd.

No.68, Sanzhuang Road, Songjiang Export Processing Zone, Shanghai 201613, P.R.
CHINA, китай

Примечание:
Дату изготовления Вы можете определить по серийному номеру, расположенному на
задней части изделия и на коробке.
Серийный номер: yymXXXXXX

yy: год (последние цифры номера года) 15 –2015, 16 –2016, 17 –2017
m: месяц A – Январь, B – Февраль, C – Март, D – Апрель, E – Май, F – Июнь,
H – Июль, J – Август, K – Сентябрь, L – Октябрь, M – Ноябрь, N – Декабрь

Установленный производителем срок службы для данного изделия равен 5 годам с
даты производства при условии, что изделие используется в строгом соответствии с
настоящей инструкцией по эксплуатации и применимыми техническими стандартами.

6

For Korea

상호 또는 성명 : Panasonic Korea Ltd.(PKL)
기기의 명칭 : POS Workstation
기본모델명 : JS-970WS0M80, JS-970WS0M83, JS-970WP0M81, JS-970WS0M70,

JS-970WS0M73, JS-970WP0M71

인증 번호 : MSIP-REI-PKL-JS-970
제조자 /제조국가 : Panasonic System Network Co., Ltd./ Japan
제조날짜 본체 밑면의 시리얼 번호를 참조하시기 바랍니다 .

이 기기는 업무용으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이 점을
주의하시기 바라며 만약 잘못 판매 또는 구입하였을 때에는 가정용으로 교환하시기
바랍니다 .

본 장치는 접지된 전원 콘센트에 연결해야 합니다 .

베터리 팩

( 경고 )

●

발열 , 화제 , 폭발 등의 위험을 수발할 수 있으니 다음 사항을 지켜주시기 바랍니다 .

a) 육안으로 식별이 가능할 정도의 부풀음이 발생된 전지는 위험할 수 있으므로 제조자

또는 판매자로 즉시 문의 할 것
b) 지정된 정품 충전기만을 사용할 것
c) 화기에 가까이 하지 말 것 ( 전자레인지에 넣지 말 것 )
d) 여름철 자동차 내부에 방치하지 말 것
e) 찜질방 등 고온다습한 곳에서 보관 , 사용하지 말 것
f) 이불 , 전기장판 , 카펫 위에 올려 놓고 장시간 사용하지 말 것
g) 전원을 켠 상태로 밀폐된 공간에 장시간 보관하지 말 것
h) 전지 단자에 목걸이 , 동전 , 열쇠 , 시계 등 금속 제품이 닿지 않도록 주의할 것
i) 휴대 기기 , 제조 업체가 보증한 리튬 2 차 전지 사용할 것
j)

분해 , 압착 , 관통 등의 행위를 하지 말 것
k) 높은 곳에서 떨어뜨리는 등 비정상적 충격을 주지 말 것

yymXXXXXX

yy: 년도 표시 (yy means year) (2015 ＝ 15, 2016 ＝ 16,.....)

m: 월 표시 (m means month)
A: 1 월 B: 2 월 C: 3 월 D: 4 월 E: 5 월 F: 6 월
H: 7 월 J: 8 월 K: 9 월 L: 10 월 M: 11월 N:

주의사항

12 월

●

이 마크가 있는 제품을 폐기하려면 지역 관청이나 구매한 대리점에게 적절한 폐기 방법에
관하여 문의하십시오 .

●

이 설명서에 표시된 것 이외의 방법을 사용하여 배터리를 충전하지 마십시오이 설명서에
표시된 방법 중 하나를 사용하여 배터리를 충전하지 않으면 전해질 유출 , 발열 , 발화

또는 파열 등이 발생할 수 있습니다 .

7

For Taiwan

甲類
此設備經測試證明符號 BSMI（經濟部標準檢驗局）之甲類數位裝置的限制規定。這些限制
的目的是為了在商業環境中使用此設備時，能提供合理的保護以防止有害的干擾。此設備會
產生、使用並散發射頻能量：如果未導照製造廠商的指導手冊來安裝和使用，可能會干擾無
線電通訊。請勿在住宅區使用此設備。

警告使用者：

這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使
用者會被要求采取某些適當的對策。

本機必須連接至接地的電源插座。

安全：電池處理

警告：新電池安裝不正確會有爆炸的危險。更換電池時，請僅使用相同或製造商建
議的同等類型電池。請勿將廢棄電池丟棄於一般垃圾中。請聯絡當地廢棄物處理機
構以獲取有關最近的廢棄電池存放站的地址。

您的電腦使用鋰幣電池。鋰幣電池為長效用電池，很有可能您永遠都不需要更換它。然而，
如果確實需要更換，請參閱您的電腦說明文件。
請勿將廢棄電池丟棄於一般垃圾中。請聯絡當地廢棄物處理機構以獲取有關最近的廢棄電池
存放站的地址。

安全：電池聲明（台灣）

廢電池請回收

8

商 品 名 稱 : 收銀機
型 號 : JS-970WS0M80, JS-970WS0M83, JS-970WP0M81,

JS-970WS0M70, JS-970WS0M73, JS-970WP0M71

額 定 電 源 : 19 V 　9.48 A
進 口 商 : 台松電器販賣股份有限公司
聯 絡 地 址 : 新北市中和區員山路 579 號
電 話 : [phone]
製造或委製廠商 : 松下系統網絡科技株式會社 日本 福岡
生 產 地 : 中國大陸
製 造 年 份 及
製 造 號 碼 : 請參照實體底面之序列號碼

yymXXXXXX

yy: 年度表示 (yy means year) (2015 ＝ 15, 2016 ＝ 16,.....)

m: 月表示 (m means month)
A: 1 月 B: 2 月 C: 3 月 D: 4 月 E: 5 月 F: 6 月
H: 7 月 J: 8 月 K: 9 月 L: 10 月 M: 11月 N: 12 月

D31221

9

Contents

Read Me First .......................................................................................... 11

Introduction ....................................................................................................... 11

Disclaimer of Warranty .......................................................................... 14

Safety Precautions ................................................................................. 15

Precautions for Use................................................................................ 18

Confirmation of Accessories ................................................................. 21

Names of Parts and Their Functions .................................................... 23

AC Adapter Installation .......................................................................... 28

AC Cord Kit Installation ......................................................................... 30

Turning the Power On and Off ............................................................... 32

How to turn the power on ................................................................................. 32

How to turn the power off .................................................................................32

Display Unit (Including Main Block) Replacement .............................. 33

Operator’s Display Replacement .......................................................... 37

When fixing parts that use VESA mounts are not installed ..............................37

When fixing parts that use VESA mounts are installed ....................................39

How to Remove Internal Battery Pack

(for Models with Internal Battery Pack) ................................................ 41

SD Memory Card Installation................................................................. 43

Cable Wire Routing ................................................................................ 44

Cable wire routing in display unit ...................................................................... 44

Cable wire routing in stand unit ........................................................................ 45

Cable wire routing in WP type display unit ....................................................... 47

Specifications ......................................................................................... 48

Cleaning of Filter .................................................................................... 52

Cleaning .................................................................................................. 53

Maintenance ............................................................................................ 53

Troubleshooting .....................................................................................53

10

Read Me First

■ Introduction

Thank you for purchasing the Panasonic POS Workstation.
This manual describes the instructions for the POS Workstation.
Please read this manual carefully before using this product.
The illustrations and photos in this manual may differ from the actual product.

List of models

Model No. Display Style Touch Panel Processor Chipset

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Core™
i5-4590T

®

Intel

Core™
i5-4590T

®

Intel

Core™
i5-4590T

®

Intel

Celeron®
Processor N2930

®

Intel

Celeron®
Processor N2930

®

Intel

Celeron®
Processor N2930

®

Intel

Celeron®
Processor N2930

JS-970WPX01X

JS-970WPX11X

JS-970WPX02X

JS-970WPX04X

JS-970WPX14X

JS-970WPX05X

JS-970WPX07X

JS-970WPX17X

JS-970WPX08X

JS-970WPX0AX

JS-970WPX0BX

JS-970WPX1BX

JS-970WPX0CX

15 type
LCD

15 type
LCD

17 type
LCD

15 type
LCD

15 type
LCD

17 type
LCD

15 type
LCD

15 type
LCD

17 type
LCD

12.1 type
LCD

15 type
LCD

15 type
LCD

17 type
LCD

Panel Resistive

Panel Capacitive

Panel Resistive

Panel Resistive

Panel Capacitive

Panel Resistive

Panel Resistive

Panel Capacitive

Panel Resistive

Panel Resistive

Panel Resistive

Panel Capacitive

Panel Resistive

®

Intel

H81

Chipset

®

Intel

H81

Chipset

®

Intel

H81

Chipset

®

Intel

Q87

Chipset

®

Intel

Q87

Chipset

®

Intel

Q87

Chipset

Intel® Q87
Chipset

Intel® Q87
Chipset

Intel® Q87
Chipset

—

—

—

—

English

11

Read Me First

Model No. Display Style Touch Panel Processor Chipset

®

Intel

JS-970WSX01X

JS-970WSX11X

JS-970WSX02X

JS-970WSX04X

JS-970WSX14X

JS-970WSX05X

JS-970WSX07X

JS-970WSX17X

JS-970WSX08X

JS-970WSX0AX

JS-970WSX0BX

JS-970WSX1BX

JS-970WSX0CX

15 type
LCD

15 type
LCD

17 type
LCD

15 type
LCD

15 type
LCD

17 type
LCD

15 type
LCD

15 type
LCD

17 type
LCD

12.1 type
LCD

15 type
LCD

15 type
LCD

17 type
LCD

Upright Resistive

Upright Capacitive

Upright Resistive

Upright Resistive

Upright Capacitive

Upright Resistive

Upright Resistive

Upright Capacitive

Upright Resistive

Upright Resistive

Upright Resistive

Upright Capacitive

Upright Resistive

X can be any alphanumeric character or blank.

Panel:

Use of mounting brackets compliant with VESA standards allows it to be mounted on a

counter top horizontally or on a wall.
Distance between screw holes in the mounting section: 100 mm × 100 mm
Horizontal or wall mounting brackets are separately required.

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Pentium®
Processor
G3320TE

®

Intel

Core™
i5-4590T

®

Intel

Core™
i5-4590T

®

Intel

Core™
i5-4590T

®

Intel

Celeron®
Processor N2930

®

Intel

Celeron®
Processor N2930

®

Intel

Celeron®
Processor N2930

®

Intel

Celeron®
Processor N2930

Intel
Chipset

Intel
Chipset

Intel
Chipset

Intel
Chipset

Intel
Chipset

Intel
Chipset

Intel® Q87
Chipset

Intel® Q87
Chipset

Intel® Q87
Chipset

®

H81

®

H81

®

H81

®

Q87

®

Q87

®

Q87

—

—

—

—

12

Upright:

It is equipped with a dedicated tiltable stand.
AC adapter is housed in the stand.

List of optional accessories

Unit Name Model No. Remarks

JS-970MG-010 Magnetic Stripe Reader
JS-970MG-020 Secure Card Reader

JS-970FP-010 Fingerprint Reader

JS-970DP-010 I-button Reader

JS-970MF-010

JS-970RD-010

JS-970RD-020

JS-970SD-010

JS-970SD-020

JS-970SDB010 2nd LCD Display Bracket

JS-970HDB010 Storage Bracket for Stand Unit
JS-970HDD010 HDD Module
JS-970SSD010 SSD Module

JS-970KDV010

JS-970KM9010

JS-970KMC010

Magnetic Stripe Reader +
Fingerprint Reader

20 Columns × 2 Rows Vacuum

Fluorescent Display
For JS-970WS

20 Columns × 2 Rows Vacuum

Fluorescent Display
For JS-970WP

2nd LCD Display
With Camera and Touch Panel

2nd LCD Display
Without Camera and Touch Panel

Battery Pack (Used at Shutdown
Due to Power Outage)

DisplayPort-VGA Conversion

Adapter
Modular-D-SUB9 Conversion

Cable (COM Port)
Modular-DIN Conversion Cable

(Cash Drawer)

ID Module
Unit

Rear Display
Unit

Other Unit

MSR Unit

Fingerprint
Reader Unit

I-button Reader
Unit

MSR +
Fingerprint
Reader Unit

Customer
Display Unit

2nd LCD Display
Unit

Battery Unit JS-970BT-010

Storage Unit

Conversion Cable

English

13

Disclaimer of Warranty

IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY
OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE

OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

●

ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR

INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF

RELATING TO THE PRODUCT;

●

PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR
NEGLIGENT OPERATION OF THE USER;

●

UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT

BY THE USER;

●

LOSS OF REGISTERED DATA BY ANY FAILURE.

14

Safety Precautions

■ POS Workstation: JS-970WP / JS-970WS series

IMPORTANT
Install a socket outlet adjacent to the equipment so that it will be easily accessible.

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

ATTENTION

Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.

Mettre au rebut les batteries usagées conformément aux instructions.

Avoid radio frequency interference

Do not place the POS Workstation near a television or radio receiver.

Avoid stacking

Do not place heavy objects on the POS Workstation.

Keep small objects away

Do not insert paper clips or other small objects into POS Workstation.
There are risks of heat, fire and explosion.

Keep dry

There are risks of heat, fire and explosion.

Do not disassemble the POS Workstation

Do not attempt to disassemble the POS Workstation. There are risks of heat, fire and
explosion.

Do not touch the plug with wet hands

There is a risk of electric shock.

Be certain to plug fully into the outlet

There are risks of electric shock and fire.

Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes
unusual noise.

These conditions can cause fire or electric shock. Confirm that smoke has stopped and
contact an authorized service center.

When unplugging, make sure to hold the body of the plug

If the power cord or outlet is damaged, there is a risk of electric shock, short circuit or fire.

Do not use a damaged power cord or plug

There are risks of electric shock and fire.

Do not use the provided power cord and the AC adapter for anything other than the
POS Workstation.

There are risks of electric shock and fire.

English

15

Safety Precautions

Clean the dust off the plug, periodically

There are risks of heat and fire.

Do not use with any other battery

Please use the specified battery.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to the instructions and local requirements.

Do not touch the power-cord or plug during a storm

There are risks of electric shock and fire.

Do not use the POS Workstation outdoors

This product assumes the indoor use. There is a risk of breakdown.

Do not put the POS Workstation on a slope or an unstable place

This can cause damage to the unit or injury by falling.

(JS-970WP series)
Select an installation area that can support the total weight

Selecting an inappropriate installation surface may cause the product to fall down or topple
over, resulting in injury. Installation work shall be started after sufficient reinforcement.

Periodic inspections shall be conducted

Rust on the metal parts or screws may cause a fall of the product resulting in injury or
accidents.
Consult the dealer for the inspections.

The measures of protection against a fall of this product shall be taken

Failure to observe this may cause a drop resulting in injury.
Be sure to install the safety wire.

The screws and bolts must be tightened to the specified torque

Failure to observe this may cause a drop resulting in injury or accidents.

Note:

●

Do not open the rear cover and the filter cover while the POS Workstation is operating.

16

■ Precautions on the Built-in Battery Pack

Do not throw this product into a fire or expose it to excessive heat.

Generation of heat, ignition or rupture of the battery may result.

Do Not Insert Sharp Objects Into the Internal Battery, Disassemble, or Modify It.

Electrolyte leakage, generation of heat, ignition or rupture of the battery may result.

Do Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It,
etc.

If this product is subjected to a strong impact, damaged or deformed, stop using it
immediately.

Do not charge the Battery using methods other than those specified.

The battery pack is rechargeable and was intended for the specified product.

Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example).

Electrolyte leakage, generation of heat, ignition or rupture of the battery may result.

English

17

Precautions for Use

Attention for capacitive touch screen

●

Do not touch it by finger nail, because capacitive touch screen can not recognize it.
Touch it by finger tip.

●

Do not touch it during startup. It initializes touch screen during startup. If it is touched
during startup, touch screen is not initialized correctly.

●

Be careful to not accidentally touch around display edges or press on display bezel as it
can negatively affect display touch sensor accuracy.

●

Touch screen calibration can be affected by atmospheric change. In case of calibration
shifted, perform a calibration adjustment.

●

Adequacy of touch screen reaction-time or sensitivity may vary by operator. Display
sensitivity can be adjusted by executing a display sensitivity adjustment program.

●

Capacitive touch-screen panel uses radio frequency to detect finger tip touch. Terminals
are configured to use different frequencies to avoid conflict in the event of two or more
terminals operating within 1.5 m (approx. 5 inches) of each other. In the event of conflict
(‘ghost’ or inexplicable touch-screen reaction(s)), shutdown and reboot the terminal to
reselect touch screen frequency.

1

*

Inquire to the supplier about the display sensitivity adjustment program.

Attention for resistive touch screen

●

Do not touch with your finger nail or the tip of a pen. Otherwise the touch screen film can
be damaged or torn, causing a possible failure. Touch it by finger tip.

●

Do not touch it during startup. It initializes touch screen during startup. If it is touched
during startup, touch screen is not initialized correctly.

1

*

HDD

●

For replacement or removal / installation of the HDD, contact the company from which
you have purchased it. Do not allow any person other than servicemen to perform such
work, as it may possibly cause an HDD or equipment failure.

Use of speakers

●

Do not emit a sound such as warning beeps at the maximum volume from the speakers
for a long time.

Carrying / moving terminals

●

Do not lift or carry the equipment by holding onto the cable cover, display unit or second
display. Firmly tighten the finger screws on the back of the display, and securely hold the
equipment at the bottom with both hands when lifting or carrying it.

18

(JS-970WP series)

Procure fixing screws separately.

●

The screws that secure this product are not supplied. Prepare them according to the
material and strength of the area where the product is to be installed.

Screw tightening

●

The screws and bolts must be tightened with an appropriate tightening torque according
to the material and strength of the installation area.

●

Do not use an impact driver. Use of an impact driver may damage the screws or cause
tightening excessively.

●

When a screw is tightened, make the screw at a right angle to the surface. After
tightening the screws or bolts, perform visual check to ensure tightening is enough and
there is no backlash.

(JS-970WS series)

Display angle adjustment

●

Take care not to place the fingers between the main block and the stand unit when the
angle of display is adjusted. Injury may occur. Adjust the display tilt- and swivel angles
with two hands placed on outside, bezel edges of the display unit.

●

To adjust the display angle, slowly move the display.

●

With the display placed in a horizontal position, putting an object on top of it, or pressing
it down firmly, can result in possible damage to the hinge part in the direction of swivel
rotation.

English

Be sure to remove this product if it is not in use.

19

Precautions for Use

Installation

●

Contact an installation contractor for the installation work.

Installation environment precautions

●

Do not install it in a place exposed to direct sunlight or near heating equipment.

●

Do not install it in a place subjected to severe temperature changes or high humidity.

●

Do not install it outdoors or in a dusty or oily smoke-hazed place.

●

Do not install it in a place where high magnetic field is present or near a receiver such as

TV or a radio.

●

Install it in a room whose temperature ranges from +5 °C to +40 °C .

●

When installing it, keep it at least 10 cm in all directions (except down) away from other
POSs or devices, ceiling, etc., and at least 6 cm away from walls.

●

Do not block the vents in POS.

●

Do not install it on an unsteady surface or in a place subjected to vibration or impact.

●

Install it in a place where it can be kept away from any liquids or mists.

●

Install an outlet in a location that makes connecting or disconnecting the plug easy.

20

Confirmation of Accessories

Before using, check the following accessories.

●

In case some items are missing, contact your dealer.

■ Main Body

JS-970WP series JS-970WS series

■ AC Cord (Limited model only)

English

■ AC Adapter (JS-970WS is embedded in the stand unit.)

Mid range model High end model

21

Confirmation of Accessories

■ Conversion Cable

Display Cable COM Cable Cash Drawer Cable

JS-970KDVX10 JS-970KM9X10 JS-970KMCX10

●The conversion cable differs according to the model.

■ Screw (JS-970WS series) ■ Clamper (JS-970WS series)

●

M3 × P0.7

●

Use the ones appropriate to the size of the
AC cord.

■ Brochure

22

Names of Parts and Their Functions

■ Front ■ Right side

■ Rear ■ Bottom

English

(Illustrations: JS-970WS series)

●

WS: JS-970WS (Upright) / WP: JS-970WP (Panel)

No. Name Functions Remarks

Used for displaying information such as
operation methods.

●

Operator’s
Display

LAN Status LED Flashes yellow or green: Communicating

The information to be displayed can be

set using application software.
This display can be used also as a touch
panel for input operation.

Common to

WS / WP

Common to

WS / WP

23

Names of Parts and Their Functions

No. Name Functions Remarks

HDD Status LED Flashes yellow or green: Accessing HDD

Lights yellow or green: Operating

Power Status
LED

Display Unit

Hinge Unit

Main Block

Stand Unit This unit contains an AC adaptor. WS only

Rear Cover

Main Cable Cover

Base Cable Cover WS only

Lights red: Power off
Flashes yellow or green: Standby
Flashes red: Suspended

The unit which includes the operator’s
display and the main block.

A mechanism allowing the display unit to
be moved up / down (up to 70 degrees
above / below the horizontal) or side to
side (up to 15 degrees towards right / left)

This unit contains the I/O port and the
storage unit.

Cover of the rear part of the stand unit.
Open when installing the 2nd display unit
or the rear display unit.

Covers for protecting the cables
connected to the main block.

Common to

WS / WP

Common to

WS / WP

Common to

WS / WP

WS only

Common to

WS / WP

WS only

Common to

WS / WP

24

AC Inlet Connect the AC cord. WS only

POP Holder Used for POP advertising holder. WS only

Speaker Used for playing sound.

Used for protecting any USB port that

USB Cover

Base Cable Cover
Lock Lever

is used temporarily such as during
maintenance.

Used for releasing the base cable cover. WS only

Common to

WS / WP

Common to

WS / WP

■ Display unit
(the bottom, with the hinge unit and the main cable and USB
covers removed)

Mid range model

High end model

English

25

Names of Parts and Their Functions

No. Name Functions Remarks

Common to

Vent Used for letting cooling air in and out.

USB Port

eSATA Port Used for connecting HDD (eSATA).

Video Port

DC Input Used for DC input.

Rear Display Port Used for connecting the 2nd display unit.

Serial Port 3

Serial Port 2

Serial Port 1

Cash Drawer Port Used for connecting a cash drawer.

LAN Port Used for connecting a LAN cable.

USB Port

Power Switch Turns on / off the power.

Used for connecting a USB device.
(USB 2.0)

Used for connecting a display device
such as the 2nd display unit.

Used for connecting a serial device.

Used for connecting a USB device.
(USB 3.0)

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

Common to

Mid range/

High end

26

USB Port (24 V)

Used for connecting a USB device. High end only

USB Port (12 V)

No. Name Functions Remarks

MIC IN Used for connecting a microphone. High end only

Audio OUT Used for connecting an audio device. High end only

■ Main block
(With the operator’s display removed from the display unit)

No. Name Functions Remarks

SD Memory Card
Slot

SD Memory Card / SDHC Memory Card /

SDXC Memory Card only.

Common to

Mid range/

High end

English

27

AC Adapter Installation

(JS-970WP series)

Pick up thumbscrews, and while pressing the center

1

of the cable cover, slide it toward you to remove.

●

Perform the work on a flat surface.

●

Place a non-slip mat on the surface to make the
work easier.

●

Remove the cable cover while picking up each
thumbscrew.

●

Do not pull the cable cover forcefully. It can cause
damage of the cable cover.

Connect the DC output connector of the AC adapter

2

to the DC input connector.

●

Push the AC cord connector all the way into the
AC IN side of the AC adapter to connect it.

Thumbscrews

Housing the connected cables in the cable cover,

3

slide the cable cover in the direction parallel to the
display and install it.

●

Push firmly on the cable cover until it clicks into
place.

28

Carefully replace the main unit on a clear, flat

4

surface.

English

29

AC Cord Kit Installation

(JS-970WS series)

Slide the lock levers of the base cable cover inward.

1

Hold the base cable cover with both hands, and

2

slide it toward you to remove.

Insert the AC cord into the right-hand AC inlet.

3

●

To ensure a proper connection, make sure that the
AC cord is fully inserted into the AC inlet.

30