Panasonic HL-C1AiM User Manual

Intelligent monitoring software for HL-C1 series

HL-C1AiM

Easy to set up and equipped with data buffering function!

Debut of a convenient intelligent monitor!

HL-C1AiM

Setting criteria screen

You can easily set up each measurement
criteria on a PC. You can also save and
load setup data.

Data buffering function

Waveform display screen
of measurement data

You can check analog waveform of data
during measuring almost in real time.
In addition, it is also possible to monitor
calculated data and output state.

Furthermore,
you can save it
with the Excel format!

Waveform display screen
of the amount of light received

You can check waveform of the amount of
light received almost in real time.
You can smoothly adjust the amount of light
emitted because it can display a position of
cell at the most amount of light received.

No need to enter data!

Easy to make a graph!

1.

Accumulation of measurement data

It is possible to accumulate data up to 48,000
data into a controller temporarily in order to
capture measurement data into a PC. All the
accumulated data can be captured into the
PC with HL-C1AiM.

Operation environment

Applicable OS
CPU
Memory
Hard disk

HL-C1

Conforming to
EMC Directive

Microsoft Windows 98/98SE/ME/2000/XP

Above Celeron 400MHz

Above 64MB

Capacity Above 15MB

SERIES

Ultrahigh-speed laser displacement sensor

2.

Possible to save the accumulated data with the Excel format

Since you can save the accumulated data with the spreadsheet data format
(CSV format), it is possible to repeat this data on the Microsoft Excel.
Therefore, you do not need to enter the data again; thus, it is easy to make
a graph. Effective and efficient quality maintenance and measures for
malfunction are possible.

*Microsoft Excel is registered trademark of Microsoft Corporation.

CD-ROM drive
Display screen
Serial port
HL-C1C version

Inspection of a shape of a tire Gap measurement of rubber

1,024 by 768 pixels, more than 256 colors

Ver2.12 or higher (Ver3.02 or higher recommended)

You need one when installing it.

RS-232C, D-sub 9 pin connector

•New CCD Style Technology

•The industry’s highest level sampling
rate of 100µs

•High-precision measurement with a
linearity of 0.1% F.S.

•FDA standards conforming type is
available

•Developed for black rubber application

•Easy thickness measurement

For details, please contact a distributor in
your area.