Panasonic HL-C105B-BK5 User Manual
ULTRA HI-SPEED
LASER DISPLACEMENT SENSOR
HL-C1***-BK5
HL-C1 Special Version for measurement
of raw and completed rubber tire
Stable ultra high-speed sensor, HL-C1
Series has added a new line up of t ire
measuring specialized Version for
Tire Making processes.
High-powered sensor enabled high
accuracy and stable measurement of
raw tire and comple ted tire which were
previously considered as difficult to
measure.
Sensing field has expanded greatly with an
exclusive controller with special functions,
in addition to previous merits of high-cost
performance, speedy response, etc.
Laser emission power 5mW type
The most suitable for measuring not only a
completed black rubber tire but also leaning
raw rubber or glossy raw rubber.
High accuracy measurement is now possible
in the many processes of tire making.
<application of raw rubber>
*Measuring a connection point of a raw rubber
belt
*Measuring thickness of a raw-rubber belt
*Measuring edge of a raw rubber belt
Response time 10KHz
<Application of a completed tire>
Inspecting unevenness
Inspecting tire form
Inspecting outer tire dimensions
etc.
<Order Guide>
Type
5mW50mm
5mW85mm
5mW50mm (F DA)
5mW85mm (F DA)
Controller
Console
Model No.
HL-C105C-BK5
HL-C108C-BK5
HL-C105F-BK5
HL-C108F-BK5
HL-C1C-M-TR
HL-C1DP-E-TR
<For raw and completed tire measuring>
Model No.
Measuring c e nt er /range
Emitting element
Sensitivity
Life expectancy of laser
(For reference)
HL-C105B-BK5
50 +/- 5mm 85 +/- 20mm
Maximum output
4.3 times better
(Compared to a HL-C1 standard)
Approximately 2.2 years
When continued emitting 24 hours in 45 degr ee centigrade
Laser emission/stop can be done with external control
Description
Laser Class
Laser Class
Laser Class
Laser Class
3A (IEC)
3A (IEC)
3B (FDA)
3B (FDA)
Exclusive controller for BK5
Exclusive console for BK5
HL-C108B-BK5
Controller
Compact console
HL-C1C-M-TR(Ver.3.02)
HL-C1DP-E-TR(Ver.3.02)
100, 144, 200, 255, 332 us
Sampling rate
(Unable to set 498,1000 us)
Automatic/15 fixed patterns
Adjustment of laser
emitting power
Fixed patterns are ;
100, 85, 70, 60, 50, 40, 30, 25, 15, 10, 7, 5, 2, 1, 0.5 %
Bright-error
suppression function
Alarm-delay function
Equipped
Equipped
Possible
Connecting to AiM software
(Major functions)
Setting parameter
Indication of data in time sequence
Data buffering function
All information is subject to change without prior notice.
SUNX Limited
2431-1 Ushiyama-cho,
Kasugai-shi, Aichi,
486-0901, Japan
Phone: +81-(0)568-33 -7211
FAX: +81-(0)568-33-2631
Overseas Sales Dept.
Phone: +81-(0)568-33 -7861
FAX: +81-(0)568-33-8591
Loading...