Panasonic HG-C1030, HG-C1050, HG-C1100, HG-C1200, HG-C1400 User guide
CMOS type
Micro Laser Distance Sensor
Reliable detection
in
10
µm precision
HG-C
Conforming to
EMC Directive
SERIES
Conforming to
FDA regulations
Measurement center
200 mm 7.874 in type
400 mm 15.748 in type
2015.07
panasonic.net/id/pidsx/global
MICRO LASER DISTANCE SENSOR
Repeatability
10 μm
600 mm 23.622 in
Measurement center distance: 400 mm 15.748 in
Measurement range: ±200 mm 7.874 in
Measurement center distance: 200 mm 7.874 in
Measurement range: ±80 mm 3.150 in
Measurement center distance: 100 mm 3.937 in
Measurement range: ±35 mm 1.378 in
(for HG-C1030)
W20 × H44 × D25 mm
400 mm 15.748 in
Dimensions
280 mm 11.024 in
Inflection resistant cable
200 mm 7.874 in
Available for all models
135 mm 5.315 in
120 mm 4.724 in
100 mm 3.937 in
65 mm 2.559 in
50 mm 1.969 in
30 mm 1.181 in
35 mm 1.378 in
25 mm 0.984 in
0 mm
Measurement center distance: 50 mm 1.969 in
Measurement range: ±15 mm 0.591 in
Measurement center distance: 30 mm 1.181 in
Measurement range: ±5mm 0.197 in
HG-C110 0
HG-C1050
HG-C1030
Item
Measurement center distance 30 mm 1.181 in 50 mm 1.969 in 100 mm 3.937 in 200 mm 7.874 in 400 mm 15.748 in
Measurement range ±5 mm 0.197 in ±15 mm 0.591 in ±35 mm 1.378 in ±80 mm 3.150 in ±200 mm 7.874 in
Beam diameter
Repeatability
Model No.
HG- C1030 HG-C1050 HG - C110 0 HG- C1200 HG-C1400
Approx.ø50 μm
1.969 mil
10 μm
0.394 mil
Approx.ø70 μm
2.756 mil
30 μm
1.181 mil
Approx.ø120 μm
4.724 mil
70 μm
2.756 mil
Approx.ø300 μm
11.811 mil
200 μm
7.874 mil
Approx.ø500 μm
300 μm 11.811 mil
Measuring distance 200
（
7.874 to 15.748 in
800 μm 31.496 mil
Measuring distance 400
（
15.748 to 23.622 in
HG-C1200
19.685 mil
to
to
400mm
）
600mm
）
HG-C1400
2
Overwhelmingly stable
Precise measurements on the order of 1/100 mm 0.0003 inch
Fitted with a precise CMOS image sensor and an original algorithm
HG-C
SERIES
Thanks to a precise CMOS image sensor, it is
now possible to perform highly precise
measurements in the order of 1/100 mm
0.0003 in. The existing adjustable range
reflective sensors cannot achieve such
accuracy.
Example: HG-C1030
Conveyor
20 μm
0.787 mil
Excellent level detection performance
Repeatability: 10 μm
(for
HG-C1030
)
Detecting warpage of a circuit board
Checking for overlapped
lead frames
Checking for presence of packing
Checking for presence of O ring
Judging front or back of cover
of electric parts
Detecting a seam (overlap) of
functional sheet
Emitting
element
LensLens
CMOS sensor
3
Compact
Compact and light-weight
Equipped with 0-5 V
analog output
An aluminum die-cast casing
protects from strain and heat
A new optical system
with a built-in mirror
MICRO LASER DISTANCE SENSOR
In general, more accurate and stable
measurements can be obtained by
increasing the optical path length
between the receptor and the light
receiving element (CMOS), but this
also increases the sensor depth and
the sensor body gets bigger.
The HG-C series sensors incorporating
a new optical system with a built-in
mirror provides smaller sensor depth
as well as higher measurement
accuracy equivalent to displacement
sensors.
The sensor not only indicates measured values in mm but also produces analog
voltage outputs. Various calculations and storage (logging) can be performed
when output is taken into a PLC + analog unit.
A light-weight but strong
die-cast aluminum
casing has been
adopted. A compact,
solid body casing
reduces the impact of
strain and heat on the
measurement accuracy.
Remove water droplets on detection surface
to achieve correct measurement.
■
Linearity characteristics
(Typical example: HG-C1030)
*For HG-C1030 / HG-C1050 / HG-C1100
PLC
・
FP0R-C10 control unit
(w/RS232C port)
AFP0RC10CRS
・
A/D converter unit w/8
input channels
(terminal block type)
AFP0401
Programmable
controller FP0R
＋Ｖ
0 V
External inputs
Control outputs
Analog voltage
outputs (0-5 V)
Analog ground
(shielded)
・
Linearity: ±0.1% F.S.*
・
Temperature characteristics: 0.03％F.S./
℃
-0.4
-0.2
0.0
0.2
0.4
-5 -2.5 0 2.5 5
-0.197 -0.098 0.098 0.197
(Center)
Measuring distance L (mm in)
Error (% F.S.)
The value can be measured
with a distance sensor.
Indicates real measurements
The smallest CMOS laser sensor in the industry*
*Based on research conducted by our company as of May 2015
Measurement center distance: 400 mm
(for
HG-C1400
)
, 200 mm
(for
HG-C1200
)
W20 × H44 × D25 mm, approx. 35 g
(excluding the cable)
Measuring the insertion
depth of an actuator
Measuring the thickness
of a panel
Measuring the thickness of a part
Linearity: ±0.1% F.S.
(for
HG-C1030 / HG-C1050 / HG-C1100
)
Detecting parts through a
viewing port
Measuring the hoop slack
Connected
to PLCs
Connected to PLCs
Controlling the dispenser
head height
Controlling the dispenser
head height
Controlling the mounter
head height
Controlling the mounter
head height
Controlling the parallel
link robot height
Installable on a food packaging
line where water splashes (IP67)
Installable on a food packaging
line where water splashes (IP67)
Detecting on-vehicle seats Judging front or back of
cover of cast parts
Measurement of a remaining
functional sheet
Built-in mirror
HG-C series
25
mm
0.984 in
Aluminum die-cast
casing
Long distance measurement
5 4
Loading...