Panasonic HG-C1030, HG-C1050, HG-C1100, HG-C1200, HG-C1400 User guide

CMOS type

Micro Laser Distance Sensor

HG-CSERIES

Conforming to	Conforming to
EMC Directive	FDA regulations

Reliable detection in 10 µm precision

Measurement center

200 mm 7.874 in type

400 mm 15.748 in type

2015.07 panasonic.net/id/pidsx/global

M I C R O L A S E R D I S T A N C E S E N S O R

Repeatability	Dimensions	Inflection resistant cable
10 μm (for HG-C1030)	W20 × H44 × D25 mm	Available for all models

600 mm 23.622 in

400 mm 15.748 in

Measurement center distance: 400 mm 15.748 in

Measurement range: ±200 mm 7.874 in

Measurement center distance: 200 mm 7.874 in

Measurement range: ±80 mm 3.150 in

280 mm 11.024 in

200 mm 7.874 in

135 mm 5.315 in

120 mm 4.724 in

100 mm 3.937 in

65 mm 2.559 in

50 mm 1.969 in 35 mm 1.378 in

30 mm 1.181 in25 mm 0.984 in

0 mm

Measurement center distance: 100 mm 3.937 in Measurement range: ±35 mm 1.378 in

Measurement center distance: 50 mm 1.969 in Measurement range: ±15 mm 0.591 in

Measurement center distance: 30 mm 1.181 in Measurement range: ±5mm 0.197 in

HG-C1400

HG-C1200

HG-C1100

HG-C1050

HG-C1030

Item	Model No.	HG-C1030	HG-C1050	HG-C1100	HG-C1200	HG-C1400
Measurement center distance		30 mm 1.181 in	50 mm 1.969 in	100 mm 3.937 in	200 mm 7.874 in	400 mm 15.748 in
Measurement range		±5 mm 0.197 in	±15 mm 0.591 in	±35 mm 1.378 in	±80 mm 3.150 in	±200 mm 7.874 in
Beam diameter		Approx.ø50 μm	Approx.ø70 μm	Approx.ø120 μm	Approx.ø300 μm	Approx.ø500 μm
		1.969 mil	2.756 mil	4.724 mil	11.811 mil	19.685 mil
						300 μm 11.811 mil
		10 μm	30 μm	70 μm	200 μm	Measuring distance 200 to 400mm
Repeatability						7.874 to 15.748 in
		0.394 mil	1.181 mil	2.756 mil	7.874 mil	800 μm 31.496 mil
						Measuring distance 400 to 600mm
						15.748 to 23.622 in

2

HG-C SERIES

Overwhelmingly stable

Precise measurements on the order of 1/100 mm 0.0003 inch

Excellent level detection performance

Repeatability: 10 m (for HG-C1030)

Detecting warpage of a circuit board		Checking for overlapped	Judging front or back of cover
		lead frames	of electric parts

Checking for presence of packing		Checking for presence of O ring	Detecting a seam (overlap) of
			functional sheet

Fitted with a precise CMOS image sensor and an original algorithm

Thanks to a precise CMOS image sensor, it is	Example: HG-C1030	CMOS sensor
now possible to perform highly precise
measurements in the order of 1/100 mm	Emitting
0.0003 in. The existing adjustable range
	element
reflective sensors cannot achieve such
accuracy.	Lens	Lens

20 μm

0.787 mil

Conveyor

3

M I C R O L A S E R D I S T A N C E S E N S O R

Compact

The smallest CMOS laser sensor in the industry*

*Based on research conducted by our company as of May 2015

Indicates real measurements		Compact and light-weight		Long distance measurement
Linearity: ±0.1% F.S. (for HG-C1030 / HG-C1050 / HG-C1100)		W20 × H44 × D25 mm, approx. 35 g (excluding the cable)		Measurement center distance: 400 mm (for HG-C1400), 200 mm (for HG-C1200)
Measuring the hoop slack	Measuring the insertion	Controlling the dispenser	Controlling the mounter	Detecting on-vehicle seats	Judging front or back of
	depth of an actuator	head height	head height		cover of cast parts

Measuring the thickness	Measuring the thickness of a part	Controlling the parallel	Installable on a food packaging
of a panel		link robot height	line where water splashes (IP67)

Connected to PLCs

Connected to PLCs

Remove water droplets on detection surface to achieve correct measurement.

Equipped with 0-5 V			A new optical system
	The value can be measured	Linearity: ±0.1% F.S.*
analog output	with a distance sensor.	Temperature characteristics: 0.03 F.S./	with a built-in mirror

				*For HG-C1030 / HG-C1050 / HG-C1100
The sensor not only indicates measured values in mm but also produces analog			■Linearity characteristics
voltage outputs. Various calculations and storage (logging) can be performed			(Typical example: HG-C1030)
when output is taken into a PLC + analog unit.				0.4
	PLC
		FP0R-C10 control unit		0.2
0 V
		(w/RS232C port)	<![if ! IE]> <![endif]>F.S.)
External inputs		AFP0RC10CRS
Control outputs		A/D converter unit w/8	<![if ! IE]> <![endif]>(%	0.0
Analog voltage		input channels	<![if ! IE]> <![endif]>Error
outputs (0-5		(terminal block type)
Analog ground		AFP0401		-0.2
(shielded)	Programmable
	controller FP0R			-0.4 -5
					-2.5	0	2.5	5
				-0.197	-0.098	(Center)	0.098	0.197
5					Measuring distance L (mm in)			4

In general, more accurate and stable measurements can be obtained by increasing the optical path length between the receptor and the light receiving element (CMOS), but this also increases the sensor depth and the sensor body gets bigger.

The HG-C series sensors incorporating a new optical system with a built-in mirror provides smaller sensor depth as well as higher measurement accuracy equivalent to displacement sensors.

Measurement of a remaining functional sheet

HG-C series

25mm

0.984 in

Built-in mirror

Detecting parts through a viewing port

An aluminum die-cast casing protects from strain and heat

A light-weight but strong die-cast aluminum casing has been adopted. A compact, solid body casing reduces the impact of strain and heat on the measurement accuracy.

Aluminum die-cast casing