Panasonic Fire Alarm Systems Heat Detectors 6275, 6276 Specification Sheet

Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: [phone] • Fax: [phone]
[e-mail] • www.panasonic-fire-security.com

Fire alarm systems

Heat detectors

6275 and 6276

• Fixed temperature alarm level

• Latching

• Can be plugged in a conventional or an addressable base

General

The detectors are conventional fixed
temperature heat detectors, i.e. they "give an
alarm" at a certain fixed temperature.

6275 goes into alarm at 60°C.
6276 goes into alarm at 80°C.
The detector's sensing element consists of a

bimetal contact. At the reached alarm
temperature the bimetal makes contact and
the detector "gives an alarm". An LED, in
the base the detector is plugged into,
indicates this. The base also has an output
for an external LED indicator 2216 / 2217.

Latching

The heat detectors are latching, i.e. the
detectors

will not be automatically reset if
the temperature falls below the detector's
"alarm temperature" (60°C and 80°C
respectively). The detector will be latched
and the LED in the base and an ext. LED
will be lit until reset is performed in the
c.i.e.

Miscellaneous

The detectors 6275 and 6276 can be plugged
into a conventional base (2324) connected to
a conventional zone line input (or an older
addressable base (2330) connected to a
COM loop).

Product applications

The heat detectors can be used in the
systems EBL500 / 512 / 128 / 1000 / 2000.

The detectors are intended for indoor use
and in dry premises.

Heat detector applications are small rooms
where the temperature can be expected to
rise rapidly in case of a fire or places where
smoke detectors can not be used.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet Date of issue Revision / Date of revision

MEW00012 2000-05-15 5 / 2006-08-31

Type numbers

6275

Heat detector, fixed temperature 60°C, latching

6276

Heat detector, fixed temperature 80°C, latching

Technical data

Voltage (V DC)
rated

allowed
normal

24
12-30
24

Current consumption at nom. volt.
(mA)

quiescent (detector only)
active (detector only)

Depending on the type of base it is plugged into. For more details, see
the base respectively.

0
Max. 70 (Current limitation in all EBL equipment)

Ambient temperature (°C)
operating

storage

6275 / 6276

-10 to +40 / -10 to +60

-25 to +70 / -25 to +70
Ambient humidity (% RH) max. 95, non condensing
Ingress Protection rating (estimated) IP22
Alarm temp. (fixed temp.)

60°C (6275), 80°C (6276)
Weight, detector only (g) 70
Colour grey (N8, Munsell colour code)
Approvals CE, EN54-5, response grade 1 (6275)

CE, EN54-8, temp. range 1 detector (6276)