Panasonic ES8224 User Manual
English 2
Français 8
Español 14
Before operating this unit, please read these instructions completely.
Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil.
Operating Instructions
Manuel d’utilisation
Rechargeable Shaver
Rasoir rechargeable
Model No. ES8224
N° de modèles ES8224
2
English
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should
always be followed, including the following:
Read all instructions before using this appliance.
7. Do not use this appliance with damaged shaving blades
and/or foil, as facial injury may occur.
8. Always attach plug to appliance first, then to outlet. To
disconnect, turn all controls to “off” then remove plug from
outlet.
DANGER
1. Do not reach for an appliance that has fallen into water.
Unplug immediately.
2. Charger unit is not for immersion or for use in shower.
3. Do not place or store appliance where it can fall or be pulled
into a tub or sink. Do not place in or drop into water or other
liquid.
4. Except when charging, always unplug this appliance from
the electrical outlet immediately after using.
5. Unplug this appliance before cleaning.
6. Do not use an extension cord with this appliance.
WARNING
1. Close supervision is necessary when this appliance is used
by, on, or near children or invalids.
2. Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
the manufacturer.
3. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to a
service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
To reduce the risk of electric shock:
To reduce the risk of burns, fire, electric
shock, or injury to persons:
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Power source: 100-240 V AC, 50-60 Hz
(Automatic voltage conversion)
Motor voltage: 3.6 V DC
Charging time: 1 hour
This product is intended for household use only.
3
English
Important
Before use
This Wet/Dry shaver can be used for wet shaving with shaving
lather or for dry shaving. You can use this watertight shaver in
the shower and clean it in water. The following is the symbol of
Wet shaver. The symbol means that hand-held part may be
used in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks and
notice the difference. Your Panasonic Wet/Dry shaver requires a
little time to get used to because your skin and beard need
about a month to adjust to any new shaving method.
Using the shaver
Caution - The outer foil is very thin and can be damaged if not
used correctly. Check that the foil is not damaged before using
the shaver. Do not use the shaver if the foil etc. is damaged as
you will cut your skin.
Charging the shaver
Only use the supplied power cord to charge the shaver. Plug in
the adaptor into a household outlet where there is no moisture
and handle it with dry hands. The shaver may become warm
during use and charging. However, this is not a malfunction. Do
not charge the shaver where it will be exposed to direct sunlight
or other heat sources. Hold the adaptor when disconnecting it
from the household outlet. If you tug on the power cord, you
may damage it. Contact an authorized service center if the
power cord gets damaged.
Adequate ambient temperature for charging is 15-35 °C (5995 °F)
If the backlight of the LCD panel does not glow, wait for a short
while until it glows.
The adaptor is intended to be correctly oriented in a vertical or
floor mount position.
Cleaning the shaver
Disconnect the power cord from the shaver before cleaning it to
prevent electric shock. Keep both the inner blades inserted. If
only one of the inner blades is inserted, the shaver may be
damaged. If you clean the shaver with water, do not use salt
water or hot water. Do not soak the shaver in water for a long
period of time. Wipe it with a cloth dampened with soapy water.
Do not use thinner, benzine or alcohol.
Storing the shaver
Disconnect the power cord when storing the shaver. Do not
bend the power cord or wrap it around the shaver. Do not leave
this shaver within the reach of small children. Keep these
operating instructions in a safe place.
4
English
Parts identification
�
Charge
Charging
Connect the power
cord to the charging
stand.
Place the shaver on
the stand and plug
in the adaptor into a
household outlet.
• The backlight of the LCD
panel glows and charging
starts.
• Charging is completed when
the backlight of the LCD panel
Protective cap
System outer foil
Inner blades
System outer foil release
buttons
Pivot action selector
Finger rest
On/Off switch
LCD panel
Trimmer
Trimmer handle
Adaptor
Power cord
Appliance plug
Charging stand
Charging without the charging stand
blinks.
(Max. 1 hour later)
Insert the appliance
plug into the shaver.
Plug in the adaptor
• A special plug adaptor may be required in some areas.
into a household
outlet.
5
English
About the LCD panel
SOFT
LOCK
The LCD panel shows the remaining battery capacity from 0% to
100%, in 10% increments.
While charging
After charging is
completed
10 minutes after
charging is
completed
Using the shaver
Shave
The backlight of the
LCD panel glows.
The battery capacity is low when “10%” appears and
• A full charge will supply enough power for approx. 14 shaves of
3 minutes each.
Using the trimmer
Slide the trimmer handle up. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
The backlight of the
LCD panel blinks
once every second.
During use
•
You can shave 1 to 2 times after “10%” appears.
(This will differ depending on usage.)
The backlight of the
LCD panel blinks
once every 2
seconds.
blinks.
Press the On/Off
switch.
Hold the shaver as
illustrated above and
shave.
• Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
Pivot action selector
Use to select “SOFT” (soft) or
“LOCK” (lock).
You can change the pivot
action whether the shaver is
turned on or off.
6
English
3
4
6
1
2 3
2.3
4
Clean
Cleaning
We recommend to clean your
shaver with the “sonic” vibration
cleaning when appears in the
LCD panel.
1. Disconnect the power cord
from the shaver.
2. Apply some hand soap to the
outer foil.
3. Press the On/Off switch for
more than 2 seconds to
activate the turbo mode for
“sonic” vibration cleaning.
• appears in the LCD panel.
• After about 20 seconds, it will
be automatically turned off,
or you can turn it off by
pressing the On/Off switch.
4. Remove the system outer foil
and press the On/Off switch
for more than 2 seconds to
activate the turbo mode for
“sonic” vibration cleaning and
clean it with running water.
5. Wipe off any drops of water
with a dry cloth.
6. Remove the system outer foil
to allow it to dry completely.
Caution for turbo mode
• Shaving in turbo mode may damage your skin. Turn the shaver
off and then on again to cancel turbo mode.
• Do not place your fingers on the On/Off switch while using the
shaver. This may cause the shaver to turn off or enter turbo
mode. Place your fingers on the finger rest while using the
shaver.
Replacing the system outer foil and the inner
blades.
system outer foil once every year
inner blade once every two years
1. Press the buttons and lift
upwards as illustrated.
2. Remove the inner blades one
at a time as illustrated.
• Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Inser t the inner blades one at
a time until they click as
illustrated.
4. Inser t the system outer foil by
pushing it downwards until it
clicks.
Loading...