Panasonic ES7101, ES7103 User Manual

English 2

Français 8

Español 14

Before operating this unit, please read these instructions completely. Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil.

Operating Instructions

Manuel d’utilisation

Rechargeable Shaver

Rasoir rechargeable

Model No. ES7101/ES7103

N° de modèles ES7101/ES7103

English

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance.

DANGER

1. Do not reach for an appliance that has fallen into water. Unplug immediately.

2. Charger unit is not for immersion or for use in shower.

3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

4. Except when charging, always unplug this appliance from the electrical outlet immediately after using.

5. Unplug this appliance before cleaning.

6. Do not use an extension cord with this appliance.

To reduce the risk of electric shock:

2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never drop or insert any object into any opening.

6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

7. Do not use this appliance with damaged shaving blades and/or foil, as facial injury may occur.

8. Always attach plug to appliance ﬁrst, then to outlet. To disconnect, turn all controls to “off” then remove plug from outlet.

WARNING

1. Close supervision is necessary when this appliance is used by, on, or near children or invalids.

To reduce the risk of burns, ﬁre, electric shock, or injury to persons:

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

Power source: 100-240 V AC, 50-60 Hz (Automatic voltage conversion) Motor voltage: 2.4 V DC Charging time: 1 hour This product is intended for household use only.

English

Important

Before use



This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. The following is the symbol of Wet shaver. The symbol means that the hand-held part may be used in a bath or shower.

Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.



Using the shaver

Caution - The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin.



Charging the shaver

Do not use any power cord or AC adaptor other than one speciﬁcally designed for this model. Plug in the adaptor into a household outlet where there is no moisture and handle it with dry hands. The shaver may become warm during use and charging. However, this is not a malfunction. Do not charge the shaver where it will be exposed to direct sunlight or other heat sources. Hold the adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it. Contact an authorized service center if the power cord gets damaged. Adequate ambient temperature for charging is 0-40 °C (32104 °F).

For model #ES7101, if the plug symbol does not glow initially when the shaver is plugged in, wait for a short while until it does. For model #ES7103, if the plug symbol does not glow initially when the shaver is plugged in, wait for a short while until it does. The adaptor is intended to be correctly oriented in a vertical or ﬂoor mount position.



Cleaning the shaver

Warning - Disconnect the power cord from the shaver before cleaning it to prevent electric shock. Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol.



Storing the shaver

Disconnect the power cord when storing the shaver. Do not bend the power cord or wrap it around the shaver. Do not leave this shaver within the reach of small children. Keep these operating instructions in a safe place.

English

Parts identiﬁcation





 





 

 











Charge

Charging

 Protective cap  System outer foil 3 System outer foil release

buttons

4 Foil frame 5 Inner blades 6 Foil frame release buttons 7 Switch lock button 8 OFF/ON switch

9 LED display

LCD panel

 Appliance socket  Trimmer  Trimmer handle  Adaptor (RE7-40)  Power cord  Appliance plug

ES7101

ES7103

ES7101

ES7103

•

The battery capacity is low when

You can shave 1 to 2 times after blinks. (This will differ depending on usage.)

The battery capacity is low when “0%” appears and

blinks. You can shave 1 to 2 times after “0%” appears.

(This will differ depending on usage.) A full charge will supply enough power for approx. 14 shaves of 3 minutes each.

Insert the appliance plug into the shaver.

Plug in the adaptor into a household outlet.

If the shape of the plug does not ﬁt the power outlet, use an attachment plug adaptor of the proper conﬁguration.

blinks.

English

Reading the LED display or the LCD panel

90˚

While charging After charging is completed

ES7101 ES7103 ES7101 ES7103

The

indicators

blink once

every

second.

glows. glows.

10 minutes after charging is completed

ES7101 ES7103

blinks once every 2

seconds.

When the battery capacity is low

ES7101 ES7103

once every

second.

The indicators blink once

blinks

every 2 seconds.

Using the shaver

Shave

Depress the

switch lock button and slide the OFF/

Hold the shaver as

illustrated above and

shave. ON switch upwards.

Start out shaving by applying gentle pressure to your face.

•

Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.

Using the trimmer



Slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns.

blinks. “0%” appears and blinks.

English

2 3

Clean

Cleaning

1. Disconnect the power cord from the shaver.

2. Apply some hand soap to the outer foil.

3. Turn the shaver on and then pour some water over the outer foil.

4. Turn the shaver off after 10-20 seconds.

5. Remove the foil frame and clean it with running water.

6. Wipe off any drops of water with a dry cloth.

7. Remove the system outer foil and the foil frame to allow them to dry completely.

Replacing the system outer foil and the inner blades

system outer foil once every year

inner blade once every two years

Replacing the system outer foil



Replacing the inner blades



1. Press the system outer foil release buttons and lift the system outer foil upwards as illustrated.

2. Insert the system outer foil by pushing it downwards until it clicks.

1. Press the foil frame release buttons and lift the foil frame upwards as illustrated.

2. Remove the inner blades one at a time as illustrated.

Do not touch the edges

•

(metal parts) of the inner blades to prevent injury to your hand.

3. Insert the inner blades one at a time until they click as illustrated.

+ 14 hidden pages