Panasonic ES3832 User Manual

English 2

Español 6

Before operating this unit, please read these instructions completely. Antes de operar este manual, lea este instructivo en su totalidad.

Operating Instructions

Instrucciones de operación

Cordless Shaver

Máquina de afeitar inalámbrica

Model No. ES3831/ES3832/ES3833

Modelo No. ES3831/ES3832/ES3833

English

Important

Before use



This WET/DRY shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water.

Using the shaver



Caution - The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin.

Cleaning the shaver



If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol.

Storing the shaver



Do not leave this shaver within the reach of small children. Keep these operating instructions in a safe place.

SPECIFICATIONS

Model: ES3831/ES3832/ES3833 Batteries: Two AA dry-cell batteries (DC 3.0 V)

This product is intended for household use only.

(Sold separately)

Parts identiﬁcation

1 Protective cap 2 Outer foil 3 Foil frame 4 Inner blade 5 Foil frame release button 6 0/1 switch

7 Switch lock button 8 Battery cover 9 Battery cover release dial : Trimmer (ES3833 only) ; Case (ES3832/ES3833 only)  Cleaning brush

English

Using the shaver

Shave

Depress the switch

lock button and slide the 0/1 switch

Hold the shaver as

illustrated above and shave.

upwards.

Start out shaving by applying gentle pressure to your face.

• Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.

Using the trimmer (ES3833 only)



Slide the 0/1 switch upwards. Align the “ ” mark and the “ – ” mark on the body with each other. Place at a right angle to your skin and move downwards to trim your sideburns.

Clean

Cleaning

1. Remove the protective cap.

2. Apply some hand soap to the outer foil.

3. Turn the shaver on and then pour some water over the outer foil. (Fig. 1)

4. Turn the shaver off after 10-20 seconds.

5. Remove the foil frame while pressing the foil frame release button and clean it with running water. (Fig. 2)

6. Wipe off any drops of water with a dry cloth.

7. Dry the foil frame and the shaver completely. (Fig. 3)

English

Replacing the outer foil and the inner blade

outer foil once every year

inner blade once every two years

Replacing the outer foil



1. Press the foil frame release button and lift the foil frame upwards as illustrated.

2. Gently push the outer foil in the way as illustrated. Then it will pop up from the foil frame. (Fig. 2)

3. The new outer foil should be slightly bent and pushed in until it is hooked in the foil frame.

Replacing the inner blade



1. Remove the inner blade as illustrated.

Do not touch the edges (metal

•

parts) of the inner blade to prevent injury to your hand.

2. Insert the inner blade until it

Note:

Cleaning with the brush

clicks as illustrated.

Turn the shaver off before

• replacing the outer foil and the inner blade.

Clean the inner blade using the short brush by moving it in direction (A). Clean the outer foil, the shaver body and the trimmer using the long brush.

Do not move the short brush

• in direction (B) as it will damage the inner blade and affect its sharpness. Do not use the short brush to

• clean the outer foil.

+ 8 hidden pages