Panasonic ES2058 User Manual [en, de, es, it, fr, cs, pl]
Operating Instructions
Epilator
Model No. ES2056/ES2058
Before operating this unit, please read these instructions completely and
save them for future use.
Contents
English 2
Deutsch 10
Français 18
Italiano 26
Español 34
Nederlands 42
Português 50
Norsk 58
Svenska 66
Dansk 74
Suomi 82
Polski 90
Česky 98
Slovenčina 106
Română 114
Magyar 122
Türkçe 130
Русский 138
Українська 146
1 2007/10/30 18:04:12
2
English
3
English
Before use
Important
Before use
Before use
Make sure skin is clean before and after use. Failure to do so might cause
infection and infl ammation.
Do not use the appliance if you have eczema, rashes, sensitive skin,
proneness to infections, varicose veins, diabetes, hemophilia or poor blood
clotting or other skin conditions.
Using just before swimming and sports activities or sharing with other
persons might result in bacteria entering the skin and causing damage and
infl ammation.
Turning on the appliance without an epilation or shaver head (
ES2058
)
attached might cause fi nger injury, hair entanglement in the spinning gears
or mechanical malfunction.
The followings might cause sensitive skin damage, injury, infl ammation,
pain, bleeding, and severe pain.
Using the appliance if the epilation discs, the skin protector or the outer
foil have been damaged.
Using on or near your face, genitals, warts, pimples, bruises, rashes,
wounds or loose skin.
Applying strong pressure to the skin, repeatedly moving over the same
area or using a jabbing motion.
Using before or during menstruation, pregnancy, about one month after
giving birth, when ill and when your skin is sunburned etc.
The appliance can be used for wet or dry epilation. The following is the
symbol for a wet epilator. It means that the appliance can be used in a bath
or shower.
Safety precautions
Never use the charger in the bathroom.
Always ensure the appliance is used on an electric power source matched
to its rated voltage.
Do not bend, twist, pull or modify the cord.
Do not wrap the cord tightly around the appliance.
Never use the appliance if the cord or the charger is damaged or overly
hot or if the plug fi ts loosely in a household outlet.
Regularly clean the cord connector to prevent dust.
Do not drop or hit the appliance as the skin protector or the epilation discs
can be damaged.
•
•
•
•
•
-
-
-
-
•
•
•
•
•
•
•
The movement of the discs makes some noise but this is perfectly normal.
Keep the appliance out of the reach of children or invalids.
Do not leave the appliance near sinks, bathrooms or other high-humidity
areas where it could be exposed to water and moisture after use.
The followings might cause mechanical malfunction.
Using nail polish remover, benzine, alcohol, etc. to clean the appliance.
Leaving the appliance where it will be exposed to high temperatures or
direct sunlight.
Contact an authorized service center if the epilator or the cord get
damaged
Before use
Changing the head
Before use
1. Remove the head while holding the head release button.
2. Push the head until it clicks.
Before use
Charging the appliance
Charging
1. Plug the charger into the epilator
() and a household outlet ().
2. Charge the appliance for
approximately 12 hours. (The
charging light stays on even after
12 hours.)
The epilator can be used for
approximately 30 minutes after
12 hours charge.
When the appliance is being charged for the fi rst time or when it has not
been used for over 6 months, charge for approximately 20 hours.
The charge light may not come on after a few minutes in some cases.
However, it will come on eventually if you continue charging.
The appliance can be left plugged in after it is fully charged without
deteriorating the battery life.
If the appliance is repeatedly charged before the batteries are completely
discharged, battery life may deteriorate. (Memory effect)
Charge and use the appliance in a temperature between 5 - 40 °C.
The charger can be positioned in a vertical or horizontal position.
•
•
•
•
-
-
•
•
•
•
•
•
•
•
2-3 2007/10/30 18:04:12
4
English
5
English
Before use
Wet/foam epilation
Using
Do not use the epilation head for legs/arms to epilate your underarms
and bikini-line.
Trim your hair before epilating for the fi rst time or if you have not epilated
for a long time.
If you use the appliance in temperature of 15 °C or less, the operating
time might be reduced.
•
•
1. Wet your skin.
2. Remove the cap and attach the head you wish to use.
3. Wet the discs and place a small quantity of liquid body
soap on the discs.
4. Turn the switch on to the 1 or 2 position and then
epilate. (1=low speed epilation/2=high speed epilation)
Foam makes the epilator slide better, so you can move it fast. Always
wash the discs well after use to remove any residual soap.
Dry epilation
You can also epilate without wetting your skin or the discs.
Before use
For best epilation results
Using
90˚
Apply the epilator at a right angle to your skin
and press gently while moving it slowly
against the hair growth.
When using the appliance, pull your skin taut
where the area is prone to sagging (on the inside
of the knees and elbows).
Rub your skin to lift short hair.
Move the epilator with the side that has the foam keeper facing the front.
Do not remove the frame of the epilation head.
Do not use if your hair is longer than 5 mm.
Reddening might appear for your fi rst use. Cool towel will help if you feel
pain or there is a rash.
We recommend regular use of massage sponges or exfoliation to prevent
ingrown hair.
•
•
•
•
•
•
•
•
Moving the appliance correctly
Legs: Upwards from the bottom of the
leg.
Arms: Inwards from the outside of the
arm.
Upper arms: Upwards from the bottom
of the upper arms.
Underarms: Move in several directions
as underarm hair grows in different
directions.
Before use
Wet/foam Shaving
ES2058
Shaving
1. Attach the shaver head.
2. Wet your skin.
Shaving with soap lather makes the skin slippery for a closer shave.
Do not use shaving cream, skin cream or skin lotion as it will clog the
blades.
3. Turn the switch on to the 1 or 2 position.
(1=low speed shaving/2=high speed shaving)
Hair removal is easier and less painful when the hair is short.
Slide the pop-up trimmer switch up to cut long hair.
Press gently so that the whole of the blade is in close contact with the
skin and the surface of the blade does not move up and down.
Shaving the bikini line with the bikini comb
Place the bikini comb onto the shaver head and slide trimmer up.
When the bikini comb is in place, make sure the comb is in close contact
with the skin.
Dry shaving
You can also shave without wetting your skin or the discs.
Before use
Cleaning the epilator
Cleaning
Switch off and unplug the appliance before cleaning.
Always unplug the charger from a household outlet and from the epilator
before cleaning the appliance.
Wipe the main body only with a dry cloth. The use of alcohol etc. might
•
•
•
•
•
•
•
•
4-5 2007/10/30 18:04:13
6
English
7
English
cause discoloration or deformation of the main body.
Always attach the caps when storing the epilator.
Washing your epilator
Always clean the frames and discs after use to keep them in a hygienic
state.
Take care not to damage the skin protector during cleaning.
1
2-4
1. Remove the frame by pushing the frame release button.
2. Apply liquid hand soap to the discs and blade.
3.
Turn the switch on and then wet the discs to create foam.
4. Wash the head with water to clean hair.
Do not use hot water.
If soap is not completely washed away, then a white deposit can
accumulate and prevent the blades from moving smoothly.
5. Turn the switch off, wipe the appliance with a dry cloth and dry it well.
Cleaning your epilator with the supplied brush
You can also clean the epilation head and the shaver head (
ES2058
)
with the cleaning brush.
•
•
•
•
Before use
Replacing the outer foil
ES2058
Replacing
Replace the shaving foil and the inner blade when you notice reduced
shaving performance. Never remove the outer foil of the shaver head for any
other reason than to change it.
Removing the outer foil
While pushing the outer foil gently with the fi ngers, use a fi ngernail to
release the plastic panel on the blade from the catches on the inside
of the frame.
Fitting the new outer foil
Hold the outer foil so that the surface with the plastic panel (i.e. the
surface that will come into contact with the inner blade) faces upward and
then insert it into the frame so that the catches on the frame fi t into the
holes on the foil.
We recommend replacing the outer foil every year and the inner blade
every two years.
For environmental protection and recycling of materials
This epilator contains Ni-MH batteries.
Please make sure that the battery is disposed of at an offi cially assigned
location, if there is one in your country.
•
6-7 2007/10/30 18:04:14
8
English
9
English
Removing the built-in rechargeable batteries
The batteries in this epilator are
not intended to be replaced by
consumers. However, they can
be replaced at an authorized
service center.
The procedure below shows
how to remove the batteries so
that they can be disposed of.
Unplug the charger from the
epilator before disassembling
it.
Turn the switch on to the 1 or 2 position until the batteries are completely
discharged.
Using a screwdriver, disassemble the unit in the following order.
Please take care not to short-circuit the batteries.
Perform steps to to disassemble the epilator.
Specifi cations
Power supply AC 220 - 240 V, 50-60 Hz
Charging time 12 hours
Batteries Ni-MH
Power consumption Approx. 1 W (When charging.)
Weight Epilator
(Approx. 185 g with the epilation head)
(Approx. 170 g with the shaver head)
ES2058
Airborne Acoustical Noise
Epilation head for legs/arms: 69 (dB(A) re 1pW)
Epilation head for underarms/bikini-line: 67 (dB(A) re 1pW)
Shaver head: 63 (dB(A) re 1pW)
ES2058
Subject to change without notice.
This product is intended for house-hold use only.
READ ALL INSTRUCTIONS BEFORE USE
•
•
•
•
Before use
Parts identifi cation
Protection cap
Epilation head for legs/arms
Epilation discs (inside)
Skin protector (metal part on
the outside)
Legs/arms frame
Foam keeper
Frame release button
Foam wiper
Main body
Head release button
On/off switch
Charging light
Epilation head for underarms/
bikini-line
Epilation discs (inside)
Skin protector (metal part on
the outside)
Frame release button
Foam keeper (on both sides)
Underarms frame
Bikini comb
ES2058
Shaver head
ES2058
Outer foil
Trimmer
Frame
Pop-up trimmer switch
Frame release button
Accessories:
Charger (RE7-44), cleaning brush
and pouch
(Please do not use accessories any
other than the accessories provided.)
8-9 2007/10/30 18:04:14
Loading...