Panasonic EH-NA98 User Manual

Download

Page 1

Operating Instructions

(Household)

Model No.

Hair Dryer

EH-NA98

English ............................................. 3

EH-NA98_ASIA.indb 1EH-NA98_ASIA.indb 1 1/11/2561 15:19:111/11/2561 15:19:11

Page 2

EH-NA98_ASIA.indb 2EH-NA98_ASIA.indb 2 1/11/2561 15:19:111/11/2561 15:19:11

Page 3

Contents

Operating Instructions

(Household)

Model No.

Hair Dryer

EH-NA98

English

Safety precautions..................... 6

Parts identiﬁ cation ............................10

About nanoe™ and double

mineral* ..............................................12

Maintenance of the hair dryer ..........16

Troubleshooting ................................18

Speciﬁ cations ....................................18

Caution for AC Mains Lead ............... 19

How to use the hair dryer .................13

Thank you for purchasing this Panasonic product.

Before operating this unit, please read these instructions completely and save them for future use.

EH-NA98_ASIA.indb 3EH-NA98_ASIA.indb 3 1/11/2561 15:19:111/11/2561 15:19:11

Page 4

Notice

English

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• When the hair dryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair dryer is switched off.

• For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

EH-NA98_ASIA.indb 4EH-NA98_ASIA.indb 4 1/11/2561 15:19:111/11/2561 15:19:11

Page 5

• This symbol with prohibition sign in red on the appliance means “Do not use this appliance near water”. Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualiﬁ ed persons in order to avoid a hazard.

English

EH-NA98_ASIA.indb 5EH-NA98_ASIA.indb 5 1/11/2561 15:19:111/11/2561 15:19:11

Page 6

nanoe™ is a trademark of Panasonic Corporation. A nanoe™ is a nano-sized ion particle coated with water particles.

English

Safety precautions

To reduce the risk of injury, loss of life, electric shock, ﬁ re, and damage to property, always observe the following safety precautions.

Explanation of symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

Denotes a potential

WARNING

CAUTION

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a speciﬁ c operating procedure that must not be performed.

This symbol is used to alert users to a speciﬁ c operating procedure that must be followed in order to operate the unit safely.

Some parts of the safety precaution illustrations differ from the actual product.

hazard that could result in serious injury or death.

Denotes a hazard that could result in minor injury or property damage.

WARNING

►Plug and Cord

Do not use with the cord bundled.

- Doing so may cause ﬁ re or electric shock.

Do not damage the cord or plug. Do not damage or modify, or forcefully bend, pull, or twist the cord. Also, do not place anything heavy on or pinch the cord.

- Doing so may cause electric shock, burn or ﬁ re due to a short circuit.

Do not use when the plug or cord is damaged or hot.

- Doing so may cause burn, electric shock, or ﬁ re due to a short circuit.

Never use the appliance if the plug ﬁ ts loosely in a household outlet.

- Doing so may cause burn, electric shock, or ﬁ re due to a short circuit.

Do not connect or disconnect the plug to a household outlet with a wet hand.

- Doing so may cause electric shock or injury.

Do not wrap the cord tightly around the main body when storing.

Doing so may cause the wire in the cord

to break with the load, and may cause electric shock, burn or ﬁ re due to a short circuit.

Do not store or use the cord in a twisted state.

- Doing so may cause the wire in the cord to break with the load, leading to electric shock or ﬁ re due to a short circuit.

EH-NA98_ASIA.indb 6EH-NA98_ASIA.indb 6 1/11/2561 15:19:111/11/2561 15:19:11

Page 7

WARNING

Disconnect the plug by holding onto it instead of pulling on the cord.

- Failure to do so may cause the wire in the cord to break, and may cause burn, electric shock, or ﬁ re due to a short circuit.

Regularly clean the plug to prevent dust from accumulating.

- Failure to do so may cause ﬁ re due to insulation failure caused by humidity. Disconnect the plug and wipe with a dry cloth.

Always turn off the power switch and disconnect the plug from the household outlet after use.

- Failure to do so may cause ﬁ re or burn.

Use the household outlet alone: do not use with an extension cord. Fully insert the plug. Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the appliance.

- Failure to do so may cause ﬁ re or electric shock.

►In case of an abnormality or malfunction

Immediately stop using and remove the plug if there is any abnormality or malfunction.

Failure to do so may cause ﬁ re, electric shock, or injury.

• Air is not emitted

• Unit stops sporadically

• Interior becomes red hot and smoke is emitted

- Immediately request inspection or repair at an authorized service center.

►Maintenance

When you see sparks around the air outlet while using the hot air setting, stop use and remove the lint on the air outlet and air inlet.

- Failure to do so may cause burn or ﬁ re.

►This appliance

Do not block or insert hair pins or other foreign objects into the air inlet, air outlet, nanoe™ outlet or mineral ion outlet.

- Doing so may cause ﬁ re, electric shock, or burn.

English

EH-NA98_ASIA.indb 7EH-NA98_ASIA.indb 7 1/11/2561 15:19:121/11/2561 15:19:12

Page 8

English

WARNING

Do not leave the area with the power switch left on.

- Doing so may cause ﬁ re.

Do not store within the reach of children or infants. Do not let them use it.

- Doing so may cause burn, electric shock, or injury.

Do not use in proximity of ﬂ ammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover).

- Doing so may cause an explosion or ﬁ re.

Do not immerse the appliance in water. Do not use this appliance near water.

- Doing so may cause electric shock or ﬁ re.

Never modify, disassemble, or repair.

- Doing so may cause ignition or injury due to abnormal operation. Contact an authorized service center for repair.

Do not use the appliance with a wet hand.

- Doing so may cause electric shock or ﬁ re due to a short circuit.

This appliance is not designed for commercial use, and is not intended for use without appropriate maintenance.

- Doing so may cause burn or ﬁ re due to a continuous load or overload.

If you feel pain or abnormality on your skin or other part of your body, immediately stop using this product.

- Failure to do so may cause problems with the skin or body.

EH-NA98_ASIA.indb 8EH-NA98_ASIA.indb 8 1/11/2561 15:19:121/11/2561 15:19:12

Page 9

CAUTION

►To protect your hair

Do not use with the air inlet damaged.

- Your hair may get tangled in the air inlet, which could damage the hair.

Be sure to keep a distance of over 3 cm between the air outlet and your hair.

- Failure to do so may cause burns to the hair.

Be sure to keep your hair at least 10 cm away from the air inlet.

- Your hair may get tangled in the air inlet, which could damage the hair.

► Note the following precautions

Do not drop or subject to shock.

- Doing so may cause electric shock or ignition.

Only use for drying or styling human hair or for skin. (Do not use on pets, or to dry clothing, shoes, etc.)

- Doing so may cause ﬁ re or burn.

Do not use on children or infants.

- Doing so may cause burn.

Do not touch the air outlet and set nozzle which will become very hot.

- Doing so may cause burn.

Do not look into the air outlet while in use.

- The hair dryer blows air with dust, etc., possibly resulting in injury.

10cm

3cm

During use or when unfolding or folding the handle, do not touch the shaded area as shown in ﬁ gures below.

- Failure to do so may cause ﬁ nger injury.

English

Close your eyes when blowing air on your face in skin care mode.

- Failure to do so may cause eye problems.

►Notes

• This appliance is equipped with an automatic overheating protective device. If the appliance overheats, it will switch to cold air mode. Switch off the appliance and unplug it from the household outlet. Allow it to cool down for a few minutes before using it again. Check that no ﬂ uff, hair etc. is in the air inlets and outlets before switching it on again.

• You may notice a characteristic odor when using this appliance. This is caused by the ozone it generates and is not harmful to the human body.

EH-NA98_ASIA.indb 9EH-NA98_ASIA.indb 9 1/11/2561 15:19:121/11/2561 15:19:12

Page 10

Parts identiﬁ cation

English







►Quick-dry nozzle

You can increase the drying rate by using the vertical strong and weak airﬂ ows to dry and loosen bundles of damp hair.

• The quick-dry nozzle cannot be removed.













Strong airﬂ ow

(Image)

Soft airﬂ ow







Quick-dry nozzle

A Air outlet

Quick-dry nozzle

B Mineral ion outlet C nanoe™ outlet D Mode indicator E Mode switching button F Handle G Ring for hanging H Cord I Plug J Power switch

: Turbo (Very strong airﬂ ow) : Dry (Strong airﬂ ow) : Set (Gentle airﬂ ow) : Off

K Air inlet L Panel M Set nozzle

►Set nozzle

For easy styling and blow drying of hair, attach the set nozzle to the hair dryer.

• Set nozzle helps to direct the airﬂ ow onto a speciﬁ c area of the hair

EH-NA98_ASIA.indb 10EH-NA98_ASIA.indb 10 1/11/2561 15:19:131/11/2561 15:19:13

Page 11

Mode indicator and mode explanation

Switch mode with mode switching button

• The appliance will enter hot air mode when the power switch is turned on.

Hot air mode

When the power switch is set to [ [

]

Intelligent temperature

control mode

] or

Scalp care mode

English

[HOT] Red

• Hot air blows.

For hot air

[ ] Yellow [HOT] Red

• The appliance detects the surrounding air temperature and switches between hot and cold air at appropriate intervals.

• In all modes, the nanoe™ lamp glows, and air including nanoe™ and mineral ion blows.

• When [HOT], [ hair and making your hair shiny.

EH-NA98_ASIA.indb 11EH-NA98_ASIA.indb 11 1/11/2561 15:19:131/11/2561 15:19:13

Press and hold the mode switching button for 1 second or more to switch

Hot/Cold alternating mode Cold air mode

Automatic

switching

] (hot/cold alternating mode) hot air, [SCALP] is selected, cold air blows around the hot air, helping set your

[HOT] Red blinking

The appliance detects

• the surrounding air temperature and blows air at a comfortable temperature for drying.

For cold air

[ ] Yellow [COLD] Blue

For power switch [

] or [

For power switch [

]

[SCALP] Green

• Gentle hot air for scalp care blows.

[COLD] Blue

• Cold air blows.

Skin care mode

[COLD] Blue [SKIN] Yellow

•

Weak cold air for skin care blows.

Page 12

About nanoe™ and double mineral*

English

* “Double mineral” means mineral ions generated by two zinc

electrodes.

nanoe™ and double mineral effect

Penetrates hair with moisture and tightens cuticle to keep your hair elastic and healthy. Your hair becomes stronger against damage from brushing.

Mineral ion outlet

What is nanoe™, mineral ion?

(nanoe™, mineral ion generation method: high voltage discharge)

nanoe™

nanoe™ is generated by collecting the available moisture in the air, so depending on the usage environment, nanoe™ may not be generated. In environments of low temperature and low humidity, moisture in the air becomes difﬁ cult to collect. When this occurs, negative ions are generated. nanoe™ is ion wrapped in water that are invisible to the human eye.

Mineral ion

Ions generated by a zinc electrode that cannot be seen by the eye.

Panel effect

Just by grasping the panel along with the handle, more nanoe™ is attracted to your hair.

Panel

►Note

•

Results of nanoe™, mineral ions and hot/cold alternating mode (See page 13.) on hair vary according to the individual, and the following people may ﬁ nd it hard to experience an effect.

- People with curly hair

- People with strong wavy hair

- People with smooth hair that can be easily set

- People who have had a straightening perm within 3 to 4 months

- People with short hair

Curly hair Wavy hair

EH-NA98_ASIA.indb 12EH-NA98_ASIA.indb 12 1/11/2561 15:19:141/11/2561 15:19:14

Page 13

How to use the hair dryer

Preparation

Use a towel to partially dry your hair.

Then brush or comb your ﬁ ngers to remove

tangles. Plug into the household outlet.

Dry your hair

Select airﬂ ow strength using

the power switch.

• Select [ ] or [ ] with the power switch.

Direct warm air throughout

your hair.

• Your hair will dry quickly if you direct the warm air towards the roots.

When the hair is about 90% dry, use the hot/

cold alternating mode to ﬁ nish it well, making the hair shiny.

• Select [ ] with the mode switching button.

In order to thoroughly apply hot and cold air, part your hair to the left and right to dry it.

1. Apply the hot/cold alternating mode while running your ﬁ ngers through your hair from the inside. (One side)

2. Apply the hot/cold alternating mode while running your ﬁ ngers through your hair from the top of your head to the tip of your hair. (One side)

3. Also perform step 1 and 2 on the opposite side.

Set the power switch to [

Remove the plug from the household outlet.

• When drying is complete, ﬁ nish with a brush or your ﬁ ngers.

• After the hair dryer has cooled down sufﬁ ciently, keep it in a place with low humidity.

English

EH-NA98_ASIA.indb 13EH-NA98_ASIA.indb 13 1/11/2561 15:19:141/11/2561 15:19:14

Page 14

Skin care mode

English

Delivers nano sized moisture ions to skin that is easy to dry out after bathing.

Do this after drying your hair following procedure 3 on P.13

Select [

power switch.

Select [COLD] with the

mode switching button.

Place the air outlet at a distance of about 20 cm

from your chin and apply air for about 1 minute, moving the appliance to the left and right.

] with the

• Use with your eyes closed.

• Perform skin care using lotion or milky lotion, in the same way and timing as normal.

Scalp care mode

Moisture remaining on the surface of scalp leads to discomfort, such as stickiness. Dry scalp gently with hot air at approx. 50 °C. (at 240 V)* *When the room temperature is 23 °C

Do this after drying your hair by about 70% following procedure 2 on P.13

Select [SCALP] with the

mode switching button.

Lift your hair by hand

and dry your scalp.

• You may feel cold depending on the ambient temperature. In this case, move the appliance further away from your scalp on [HOT] and apply air.

Select [HOT] with the

mode switching button and dry your hair overall.

EH-NA98_ASIA.indb 14EH-NA98_ASIA.indb 14 1/11/2561 15:19:151/11/2561 15:19:15

Page 15

Intelligent temperature control mode

At times when it is unpleasantly hot and humid, such as after bathing in summer, the hot air temperature is controlled automatically depending on the room temperature, to allow comfortable drying.

] or [

approx.

90 °C

10 20

approx.

60 °C

Room temperature (°C)

*Air temperature

The description of the air temperature is based on IEC

standard at 240 V.

Do this when you wish to reduce the hot sensation of hot air following procedure 2 on P.13

Press and hold the mode

switching button for 1 second or more when using HOT [

• ([HOT] changes to blinking)

Dry your hair overall.

• Press and hold the mode switching button again for 1 second or more to return to normal hot air.

• The appliance will return to hot air mode once the power switch is turned off.

To increase hair volume

Lift the base of your hair and apply the hot air from the bottom to the top.

To decrease hair volume

Run your hand through your hair in the same direction as the hair ﬂ ow, and apply hot air from the top to bottom.

To set your hair

Dampen the area of your hair you want to set with water etc.

• Massage your hair so that water etc. penetrates to the inner side.

2. Select [

Select [HOT] with the mode switching button and apply hot air.

To make your hair setting last longer

Apply cold air to the area of your hair you want to set after applying hot air.

►Note

• Wave perms may temporarily become easy to stretch when you apply nanoe™ and mineral ion to your hair, but return to their original state when you apply water or styling agents.

] with the power switch.

For top For inner hair

English

EH-NA98_ASIA.indb 15EH-NA98_ASIA.indb 15 1/11/2561 15:19:151/11/2561 15:19:15

Page 16

►Notes

• Keep a distance of over 3 cm

English

between the air outlet and your hair.

• Keep the appliance at least 10 cm away from your hair so that it is not sucked into to the air inlet.

• Be careful not to bump the air inlet such as on the corner of a desk.

• Styling and treatment agents etc. can be used. However, if you use sticky substances such as oil, gel or wax, the intended effect of nanoe™ and mineral ion may become difﬁ cult to achieve.

• Since nanoe™ and mineral ions are generated, you might encounter the following.

- Water droplets may be blown out of the nanoe™ outlet during use.

- You may hear a noise from the nanoe™ outlet or the mineral ion outlet.

- You may notice a characteristic smell during use.

10cm

3cm

Maintenance of the hair dryer

Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing maintenance on the air outlet)

Maintaining the air outlet

Do this about once a month or over

1. Plug into the household outlet.

2. Select [

3. Select [COLD] with the mode

4. While scraping dust and hair

• When performing maintenance, do not block the air inlet with your hand.

•

Dust may ﬂ y out when you use the appliance for the ﬁ rst time after maintenance. Use the appliance after conﬁ rming that dust no longer ﬂ ies out. (Do not look into the air outlet.)

], [

] or [

power switch.

switching button.

jammed in the mesh with a cotton swab, blow them away with air.

►Notes

] with the

EH-NA98_ASIA.indb 16EH-NA98_ASIA.indb 16 1/11/2561 15:19:151/11/2561 15:19:15

Page 17

Maintaining the air inlet

Do this about once a month or over

Wipe to clean lint, hair, or other matter from the air inlet with a tissue or toothbrush.

If dust is attached to the inside, remove it with a vacuum cleaner.

Vacuum cleaner

►Note

• Do not press or rub with your nails or sharp items. Doing so may cause the air inlet to break.

Maintaining the nanoe™ outlet and the mineral ion outlet

At least once a month

In order to maintain the generation amount of nanoe™ and mineral ion.

1. Prepare a commercially available

nanoe™ outlet

new cotton swab.

2. Gently insert the swab in the nanoe™ outlet and the mineral ion outlet until it stops (about 10 mm), and then turn the cotton swab 2-3 times carefully.

Mineral ion outlet

►Note

•

It is easier to clean the nanoe™ outlet and the mineral ion outlet with a narrow cotton swab (for example, one intended for babies).

Maintaining the main body

Do this when dirty

To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out ﬁ rmly, then wipe with the cloth.

►Notes

• Do not use substances such as alcohol, nail polish remover or detergent (hand soap). Doing so may result in malfunction or part cracks or discoloration.

• Do not leave the appliance with hairdressing products or cosmetics on it. Doing so will cause deterioration of the plastic, leading to discoloration and cracks.

alcohol

polish remover

English

EH-NA98_ASIA.indb 17EH-NA98_ASIA.indb 17 1/11/2561 15:19:161/11/2561 15:19:16

Page 18

Troubleshooting

English

Sparks can be seen inside the appliance when using [HOT]. (These sparks are caused by the thermostat switch which is the protective device, and are not dangerous.)

Hot air repeatedly turns into cold air.

The hot air is abnormally hot.

The power plug is abnormally hot.

Sparks are generated inside the nanoe™ outlet.

A noise (crackling) is heard inside the nanoe™ outlet.

There is a peculiar smell.

Water droplets ﬂ y out from the nanoe™ outlet.

The [HOT] lamp is blinking quickly (twice per second).

If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorised by Panasonic for repair.

Problem Possible cause Action

Dust is attached to the air inlet or air outlet.

Hair or something is blocking the air inlet.

The power plug is not ﬁ rmly inserted into the outlet.

The needle-shaped part located at the back of the nanoe™ outlet is dirty.

This is because nanoe™ and mineral ion produce a peculiar smell; there is no inﬂ uence to your body.

Water droplets occasionally ﬂ y out from when generating nanoe™; this is not an abnormality.

Device abnormality.

Remove the attached dust. (See page 16 - 17.)

Do not block the air inlet.

Use an outlet in which the power plug ﬁ ts snugly.

Perform maintenance on the nanoe™ outlet. (See page 17.)

Please consult an authorized service center for repair.

Speciﬁ cations

Product model EH-NA98

Power source

Power consumption

Accessory Set nozzle

Airborne Acoustical Noise without nozzle 76 (dB(A) re 1 pW)

This product is intended for household use only.

220 V

50 - 60 Hz 230 V 50 - 60 Hz 240 V 50 - 60 Hz

1 500 W 1 650 W 1 800 W

EH-NA98_ASIA.indb 18EH-NA98_ASIA.indb 18 1/11/2561 15:19:161/11/2561 15:19:16

Page 19

Caution for AC Mains Lead

For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10-ampere fuse is ﬁ tted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is reﬁ tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (ﬁ gures A and B). Conﬁ rm the AC mains plug ﬁ tted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

Fuse (10 ampere)

English

Before use

Remove the connector cover.

EH-NA98_ASIA.indb 19EH-NA98_ASIA.indb 19 1/11/2561 15:19:161/11/2561 15:19:16

Page 20

Disposal of Old Equipment Only for European Union and countries with recycling

English

systems

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national

legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local authority. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

EH-NA98_ASIA.indb 20EH-NA98_ASIA.indb 20 1/11/2561 15:19:161/11/2561 15:19:16

Page 21