PANASONIC EEHZC 68U 50 Datasheet

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors

Surface Mount Type

Series : ZC Type : V

High temperature Lead-Free re ow

Features

●

Endurance: 4000 h at 125 °C (High temperature / Long life)

●

Low ESR and high ripple current (85 % over, Lower ESR than current V-TP)

●

High-withstand voltage (25 V.DC to 80 V.DC), Low LC (0.01 CV or 3 A)

●

Equivalent to conductive polymer type aluminum electrolytic capacitor

(There are little characteristics change by temperature and frequency)

●

Vibration-proof product is available upon request. (08 mm and larger)

●

AEC-Q200 compliant

●

RoHS directive compliant

Speci cations

Size code

Category temp. range

Rated voltage range

Nominal cap.range

Capacitance tolerance ±20 % (120 Hz/+20 °C)

DC leakage cur rent I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater)

Dissipation factor (tan d)

Endurance 1

Endurance 2

Shelf life

Damp heat (Load)

Resistance to

soldering heat

25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC

125 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage

Capacitance change Within ±30% of the initial value

125 °C, 3000 h, apply the rated ripple current without exceeding the rated voltage

Capacitance change Within ±30% of the initial value

After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)

85 °C, 85 % to 90 %, 2000 h, rated voltage applied

Capacitance change Within ±30% of the initial value

After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.

Capacitance change Within ±10% of the initial value

CDD8FG

–55 °C to +125 °C

10 µF to 33 µF 10 µF to 56 µF 22 µF to 100 µF 22 µF to 220 µF 33 µF to 330 µF

Please see the attached standard products list

tan

d

E. S. R.

DC leakage current Within the initial limit

tan

d

E. S. R.

DC leakage current Within the initial limit

tan

d

E. S. R.

DC leakage current Within the initial limit

tan

d

DC leakage current Within the initial limit

200 % of the initial limit

<

200 % of the initial limit

<

200 % of the initial limit

<

300 % of the initial limit

<

200 % of the initial limit

<

200 % of the initial limit

<

Within the initial limit

Marking Dimensions (not to scale)

Example : 25 V.DC 33 µF Marking color : BLACK

Negative polarity marking (–)

Capacitance (µF)

33

Series identification

ZCE

Lot number

Rated voltage mark

0D±0.5

Pressure relief (010 and larger)

Size

D L A, B H I W P K

code

0.3 max.

H

L

C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35

Rated voltage mark

E 25 V.DC
V 35 V.DC

J 63 V.DC

K 80 V.DC

H 50 V.DC

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.

D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35

D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35

F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2

G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2

The dimensions of the vibration-proof products, please refer to the page of

·

the mounting specifi cation.

–

+

B±0.2

A±0.2

K

W

( ) Reference size

(I)

(P)

(I)

(Unit : mm)

+ 0.15

- 0.20

+ 0.15

- 0.20

+ 0.15

- 0.20

Nov. 201605

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors

Standard products

Case size

Rated

voltage

(V.DC)

· Please refer to the page of “Refl ow profi le” and “The taping dimensions”.

Capaci-

tance

(±20 %)

(µF)

33 5 5.8 C 550 – 80 0.14 EEHZC1E330R – 1000
56 6.3 5.8 D 900 – 50 0.14 EEHZC1E560P – 1000

100 6.3 7.7 D8 1400 – 30 0.14 EEHZC1E101XP – 900

25

220 8 10.2 F 1600 1900 27 0.14 EEHZC1E221P EEHZC1E221V 500
330 10 10.2 G 2000 2900 20 0.14 EEHZC1E331P EEHZC1E331V 500

22 5 5.8 C 550 – 100 0.12 EEHZC1V220R – 1000
47 6.3 5.8 D 90 0 – 60 0.12 EEHZC1V470P – 1000

35

50

63

80

68 6.3 7.7 D8 1400 – 35 0.12 EEHZC1V680XP – 900
150 8 10.2 F 1600 1900 27 0.12 EEH ZC1V151P EE HZC1V151V 500
270 10 10.2 G 2000 2800 20 0.12 EE HZC1V271P EEHZC1V271V 500

10 5 5.8 C 500 – 120 0.10 EEHZC1H100R – 1000

22 6.3 5.8 D 750 – 80 0.10 EEHZC1H220P – 1000

33 6.3 7.7 D8 1100 – 40 0.10 EEHZC1H330XP – 900

68 8 10.2 F 1250 – 30 0.10 EEHZC1H680P EEHZC1H680V 500
100 10 10.2 G 1600 – 28 0.10 EEHZC1H101P EEHZC1H101V 500
120 10 10.2 G 16 00 – 28 0.10 EEHZC1H121P EEHZC1H121V 500

10 6.3 5.8 D 700 – 120 0.08 EEHZC1J100P – 1000

22 6.3 7.7 D8 900 – 80 0.08 EEHZC1J220XP – 900

33 8 10.2 F 1100 – 40 0.08 EEHZC1J330P EEHZC1J330V 500

56 10 10.2 G 1400 – 30 0.08 EEHZC1J560P EEHZC1J560V 500

68 10 10.2 G 1400 – 30 0.08 EEHZC1J680P EEHZC1J680V 500

22 8 10.2 F 1050 – 45 0.08 EEHZC1K220P EEHZC1K220V 500

33 10 10.2 G 1360 – 36 0.08 EEHZC1K330P EEHZC1K330V 500

47 10 10.2 G 1360 – 36 0.08 EEHZC1K470P EEHZC1K470V 500

(mm)

DL

f

Ripple current

Size

code

(mA r.m.s.)

Endurance 1 Endurance 2

(100 kHz)
(+125 °C)

Specifi cation Part number

ESR

(10 0 kHz)

(+2 0 ° C)

(mΩ)

(120 Hz)
(+2 0 ° C)

tan

Endurance 1 : 125 °C 4000 h
Endurance 2 : 125 °C 3000 h

Min.

packaging q'ty

d

Standard

Product

Vibration-proof

product

Tap ing

(pcs)

Frequency correction factor for ripple current

Rated capacitance Frequency 100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz 500 Hz < f < 1 kHz

C < 47

µF

µF < C < 150 µF 0.15 0.20 0.25 0.30

47

150

µF < C 0.15 0.25 0.25 0.30

Rated capacitance Frequency 1 kHz < f < 2 kHz 2 kHz < f < 3 kHz 3 kHz < f < 5 kHz 5 kHz < f < 10 kHz

C < 47

µF

µF < C < 150

47

150

µF < C 0.45 0.50 0.60 0.65

Rated capacitance Frequency 10 kHz < f < 15 kHz 15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz

C < 47

µF

47

µF < C < 150 µF 0.70 0.75 0.80 0.80

150

µF < C 0.75 0.80 0.85 0.85

Rated capacitance Frequency 40 kHz < f < 50 kHz 50 kHz < f < 100 kHz

C < 47 µF

µF < C < 150

47

150

µF < C 0.85 0.90 1.00 1.00

Correction

factor

Correction

µF 0.40 0.45 0.55 0.60

factor

Correction

factor

Correction

µF 0.85 0.90 1.00 1.00

factor

0.10 0.10 0.15 0.20

0.30 0.40 0.45 0.50

0.60 0.65 0.70 0.75

100 kHz < f < 500 kHz

0.80 0.85 1.00 1.05

500 kHz

< f

After endurance ESR (100 kHz, –40 °C)

Size

ESR (Ω)2.0 1.4 0.8 0.4 0.3

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.

5×5.8

f

6.3×5.8

f

6.3×7. 7

f

8×10.2

f

10×10.2

f

Nov. 201605