PANASONIC ED-A 22U 400-2 Datasheet
Radial Lead Type
Aluminum Electrolytic Capacitors (Radial Lead Type)
Series : ED Type : A
✽Propose EE series for New design
Features
●
High ripple current (at high frequency)
●
Endurance : 105 °C 8000 h to 10000 h
●
Including low profi le products (20 mm height)
●
RoHS compliant
Speci cations
Category temperature range
Rated voltage range 160 V .DC to 450 V .DC
Capacitance range 10 µF to 330 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.06 CV +10 (µA) After 2 minutes application of rated working voltage at +20 °C
Dissipation factor (tan d) Please see the attached standard products list
Characteristics
at low temperature
Endurance
Shelf life
Z(–25 °C) / Z(+20 °C) 333666
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
010 : 8000 hours
012.5 to 018 : 10000 hours
Capacitance change ±20 % of the initial value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
V.DC 160 200 250 350 400 450
tan d
DC leakage current Within the initial limit
< 200 % of the initial limit
–25 °C to + 105 °C
(Impedance ratio at 120 Hz)
Frequency correction factor for ripple current
Capacitance
(µF)
Cap. < 100 µF 0.30 0.40 0.55 0.70 0.90 1.00
100 µF < Cap. 0.35 0.45 0.60 0.75 0.90 1.00
50 < f < 120 120 < f < 300 300 < f < 1 k 1 k < f < 10 k 10 k < f < 30 k
Frequency (Hz)
30 k < f < 100 k
Dimensions
Sleeve
Pressure relief
L±2.0
D
0
d
0
F 5.0 5.0 7.5 7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 12.5 16 18
0.6 0.6 0.8 0.8
fd±0.05
14 min.
–
3 min.
+
0D±0.5
F±0.5
(Unit : mm)
Jul. 201700
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h
Case size (mm)
Rated
voltage
(V.DC)
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping dimensions”.
160
200
250
350
Cap.
(±20 %)
(µF)
22 10 20 500 0.15 8000 0.6 5.0 5.0 EEUED2C220( ) 200 500
33 10 20 580 0.15 8000 0.6 5.0 5.0 EEUED2C330( ) 200 500
47 10 20 750 0.15 8000 0.6 5.0 5.0 EEUED2C470( ) 200 500
68 12.5 20 950 0.15 10000 0.6 5.0 5.0 EEUED2C680( ) 200 500
82 12.5 25 1060 0.15 10000 0.6 5.0 5.0 EEUED2C820( ) 200 500
100
150
220
330 18 31.5 2000 0.15 10000 0.8 7.5 EEUED2C331 50
22 10 20 600 0.15 8000 0.6 5.0 5.0 EEUED2D220( ) 200 500
33 10 20 650 0.15 8000 0.6 5.0 5.0 EEUED2D330( ) 200 500
47 12.5 20 790 0.15 10000 0.6 5.0 5.0 EEUED2D470( ) 200 500
68
82 16 20 1100 0.15 10000 0.8 7.5 7.5 EEUED2D820S( ) 100 250
100
150 16 25 1400 0.15 10000 0.8 7.5 7.5 EEUED2D151( ) 100 250
220 18 31.5 2000 0.15 10000 0.8 7.5 EEUED2D221 50
330 18 40 2400 0.15 10000 0.8 7.5 EEUED2D331 50
22 10 20 560 0.15 8000 0.6 5.0 5.0 EEUED2E220( ) 200 500
33 12.5 20 710 0.15 10000 0.6 5.0 5.0 EEUED2E330( ) 200 500
47
68 16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2E680S( ) 100 250
82
100
150 18 31.5 1800 0.15 10000 0.8 7.5 EEUED2E151 50
220 18 40 2100 0.15 10000 0.8 7.5 EEUED2E221 50
10 10 20 350 0.20 8000 0.6 5.0 5.0 EEUED2V100( ) 200 500
22 12.5 20 480 0.20 10000 0.6 5.0 5.0 EEUED2V220( ) 200 500
33 16 20 640 0.20 10000 0.8 7.5 7.5 EEUED2V330S( ) 100 250
47
68
82 18 25 1100 0.20 10000 0.8 7.5 7.5 EEUED2V820S( ) 100 250
100 18 31.5 1200 0.20 10000 0.8 7.5 EEUED2V101 50
DL
0
12.5 25 1170 0.15 10000 0.6 5.0 5.0 EEUED2C101( ) 200 500
16 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2C101S( ) 100 250
16 25 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151( ) 100 250
18 20 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151S( ) 100 250
16 31.5 1700 0.15 10000 0.8 7.5 EEUED2C221 100
18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2C221S( ) 100 250
12.5 25 950 0.15 10000 0.6 5.0 5.0 EEUED2D680( ) 200 500
16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2D680S( ) 100 250
16 25 1300 0.15 10000 0.8 7.5 7.5 EEUED2D101( ) 100 250
18 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2D101S( ) 100 250
12.5 25 920 0.15 10000 0.6 5.0 5.0 EEUED2E470( ) 200 500
16 20 990 0.15 10000 0.8 7.5 7.5 EEUED2E470S( ) 100 250
16 25 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820( ) 100 250
18 20 1200 0.15 10000 0.8 7.5 7.5
16 31.5 1500 0.15 10000 0.8 7.5 EEUED2E101 100
18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2E101S( ) 100 250
16 25 800 0.20 10000 0.8 7.5 7.5 EEUED2V470( ) 100 250
18 20 800 0.20 10000 0.8 7.5 7.5 EEUED2V470S( ) 100 250
16 31.5 1100 0.20 10000 0.8 7.5 EEUED2V680 100
18 25 1000 0.20 10000 0.8 7.5 7.5 EEUED2V680S( ) 100 250
Specifi cation Lead length (mm)
Ripple
current
(10 0 kHz)
(+105 °C)
(mA r.m.s.)
tan
d
(120 Hz)
(+2 0 ° C)
Endurance
(hours)
Lead
dia.
d
0
Lead space
Straight
Tap ing
Part No.
B
✽
EEUED2E820S( ) 10 0 250
Min. Packaging Q'ty
Straight
(pcs)
leads
Tap ing
(pcs)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 201700