PANASONIC ECWUX 1N 100 Datasheet
Stacked Metallized PEN
Film Chip Capacitor
Type : ECWU(X)
Stacked metallized PEN fi lm as dielectric with simple
mold-less construction
Features
●
Small in size (minimum size 3.2 mm × 1.6 mm)
●
85 °C, 85 %RH, W.V. × 1.0 for 500 hours
●
For refl ow soldering
●
RoHS directive compliant
Recommended applications
●
General purpose (Coupling, By-pass)
Explanation of part number
Plastic Film Capacitors
1 2 3 4 5 6 7 8 9 10 11
E C W U 1 5JX
Product code Dielectric &
construction
1 100 V.DC
Cap. Tol. SuffixRated voltage Capacitance Suffix
J ±5 %
Speci cations
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage 100 V.DC
Capacitance range 0.0010 µF to 0.010 µF (E12)
Capacitance tolerance ±5 %(J)
Dissipation factor (tan d) tan d < 1.0 % ( 20 °C, 1 kHz )
Withstand voltage Between terminals : Rated volt. (V.DC)×150 %, 60 s
Insulation resistance (IR) IR > 3000 MΩ (20 °C, 100 V.DC, 60 s)
Soldering conditions
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
✽
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Refl ow soldering : 250 °C max. and 60 s max. at more than 220 °C
– 55 °C to +105 °C
(Temp. at capacitor surface)
Code
5
Tape width
8 mm
Construction Dimensions
L±0.2
Element
(Stacked)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Outer
electrode
e±0.30
e±0.30
g
W±0.2
Size
LWHe g
code
H2 3.2 1.6 1.1
H3 3.2 1.6 1.5
H±0.2
G2 3.2 2.5 1.5
G3 3.2 2.5 2.1
Unit : mm
0.65> 1.0
0.65> 1.0
0.65> 1.0
0.65> 1.0
Feb. 201601
Taping sp eci cation for automatic mounting
Refer to the page of taping specifi cations
Rating · Dimensions · Quantity
●
Capacitance tolerance : ±5 %(J)
Capacitance
(µF)
0.0010 ECWU1102JX5 3.2 1.6 1.1 H2
0.0012 ECWU1122JX5 3.2 1.6 1.1 H2
0.0015 ECWU1152JX5 3.2 1.6 1.1 H2
0.0018 ECWU1182JX5 3.2 1.6 1.1 H2
0.0022 ECWU1222JX5 3.2 1.6 1.1 H2
0.0027 ECWU1272JX5 3.2 1.6 1.1 H2
0.0033 ECWU1332JX5 3.2 1.6 1.5 H3
0.0039 ECWU1392JX5 3.2 1.6 1.5 H3
0.0047 ECWU1472JX5 3.2 1.6 1.5 H3
0.0056 ECWU1562JX5 3.2 2.5 1.5 G2
0.0068 ECWU1682JX5 3.2 2.5 1.5 G2
0.0082 ECWU1822JX5 3.2 2.5 2.1 G3
0.010 ECWU1103JX5 3.2 2.5 2.1 G3
cap. > 0.012 F : Please use 100 V.DC rating of ECWU(C)
Part No.
Plastic Film Capacitors
Rated voltage 100 V.DC
Dimensions (mm)
LWH
Size
code
Q'ty
3000
2000
Recommended for land dimensions
Electrode
Unit : mm
Land
C
Size code
H2, H3 1.8 3.6 1.4
A
B
lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted.
✽
G2, G3 1.8 3.6 2.3
Land dimensions
Refl ow soldering
ABC
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 201601
Loading...