Panasonic E55A Operating Instructions Manual

LED TV

snoitcurtsnI gnitarepO

retain them for future reference.

hsilgnE

.tcudorp cinosanaP siht gnisahcrup rof uoy knahT

dna tcudorp siht gnitarepo erofeb ylluferac snoitcurtsni eseht daer esaelP

.ylno sesoprup evitartsulli rof era launam siht ni nwohs segami ehT

CGB

TQB4GC0936

DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

SDXC Logo is a trademark of SD-3C, LLC.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

Manufactured under license from Dolby Laboratories. Dolby and the double-D

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

VGA is a trademark of International Business Machines Corporation.

S-VGA is a registered trademark of the Video Electronics Standard Association.

See page 97 for more information.

symbol are trademarks of Dolby Laboratories.

QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.

DivX®, DivX Certified®, DivX

Plus

HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Transport only in upright position

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/ or performance from usage of such other maker’s peripheral devices.

Contents

Be Sure to Read

Safety Precautions ···············································4

The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record or playback.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

Quick Start Guide

Accessories / Options ···········································6

Identifying Controls ·············································10

Basic Connection················································12

Auto Tuning ························································15

Enjoy your TV!

Basic

Using “VIERA Connect” ······································18

Watching TV ·······················································19

Using TV Guide

Using the Freeview Guide (Digital TV)

Viewing Teletext

Watching External Inputs ···································· 28

How to Use VIERA TOOLS ································30

How to Use Menu Functions ······························31

·····························23

···25

····························26

Advanced

Tuning and Editing Channels ·····························39

Timer Programming

Child Lock ···························································46

Shipping Condition ·············································47

Updating the TV Software ··································48

Displaying PC Screen on TV ······························49

Advanced Picture Settings ·································50

USB HDD / SD Card Recording ·························51

Using Media Player ············································55

Using Network Services (DLNA / VIERA Connect)

Link Functions (VIERA Link) ······························· 75

External Equipment ············································82

·······················43

····65

The illustration for E55A series is used in this manual unless otherwise mentioned. Illustrations shown may be different between models and countries.

Others

Technical Information··········································85

FAQs···································································93

Specifications ·····················································96

Licence ·······························································97

Warranty

Maintenance ·····················································100

·········································98

·········································99

Safety Precautions

Warning

Safety Precautions

Handling the mains plug and lead

●

Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)

●

Ensure that the mains plug is easily accessible.

●

Do not touch the mains plug with a wet hand. (This may cause electrical shock.)

●

Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)

●

Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)

Do not move the TV with the lead plugged in the socket outlet.

•

Do not place a heavy object on the lead or place the lead near a high-temperature object.

•

Do not twist the lead, bend it excessively or stretch it.

•

Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.

•

Do not use a damaged mains plug or socket outlet.

•

AC 220-240 V

If you find any abnormality, remove the mains plug immediately!

Power source / Installation

●

This TV is designed for:

AC 220-240 V, 50 / 60 Hz

•

Table-top use

•

Indoor use

•

Do not remove covers and NEVER modify the TV yourself

●

Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.)

●

Have the TV checked, adjusted, or repaired at your local Panasonic dealer.

Do not expose to direct sunlight and other sources of heat

●

Avoid exposing the TV to direct sunlight and other sources of heat.

To prevent the spread of fire, keep candles or other open flames away from this product at all times

50 / 60 Hz

Do not expose to rain or excessive

moisture

●

To prevent damage which might result in electric shock or fire, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

Do not insert foreign objects into the TV

●

Do not allow any objects to drop into the TV through the air vents. (Fire or electrical shock may result.)

Do not place the TV on sloped or

unstable surfaces, and ensure that the

TV does not hang over the edge of the

base

●

The TV may fall off or tip over.

Use only the dedicated pedestals /

mounting equipment

●

Using an unapproved pedestal or other fixtures may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup.

●

Use approved pedestals (p. 7).

Do not allow children to handle SD Card

or dangerous parts

●

As with any small object, the SD Card could be swallowed by young children. Please remove SD Card immediately after use and store out of reach of children.

●

This product contains possibly dangerous parts that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.

Important Installation Notices

Install the TV on a stable surface

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

●

Using cabinets or stands recommended by the manufacturer of the television.

●

Only using furniture that can safely support the television.

●

Ensuring the television is not overhanging the edge of the supporting furniture.

●

Not placing the televisions on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

●

Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

●

Educating children about the dangers of climbing on furniture to reach the television or its controls.

When cleaning the TV, remove the mains plug

●

Cleaning an energised TV may cause electric shock.

Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time

●

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected.

Do not expose your ears to excessive volume from the headphones

●

Irreversible damage can be caused.

Do not apply strong force or impact to the display panel

●

This may cause damage resulting in injury.

Do not block the rear air vents

●

Adequate ventilation is essential to prevent failure of

electronic components.

●

Ventilation should not be impeded by covering the

ventilation openings with items such as newspapers,

table cloths and curtains.

●

We recommend that a gap of at least 10 cm is left all

around this TV even when placed inside a cabinet or

between shelves.

●

When using the pedestal, keep the space between the

bottom of the TV and the surface where the TV is set.

●

If pedestal is not used, ensure the vents in the bottom of

the TV are not blocked.

Minimum distance

(cm)

Built-in wireless LAN

Warning

Radio waves

●

Do not use the TV in any medical institutions or locations with medical equipment. Radio waves from the TV may interfere with the medical equipment and cause accidents due to the malfunction.

●

Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves from the TV may interfere with the automatic control equipment and cause accidents due to the malfunction.

●

Keep the distance at least 22 cm from the built-in wireless LAN part when you have a cardiac pacemaker. Radio waves from the part may interfere with the operation of the pacemaker.

●

Do not disassemble or alter the built-in wireless LAN in any way

Caution

Built-in wireless LAN

●

To use the built-in wireless LAN, an access point needs to be obtained.

●

Do not use the built-in wireless LAN to connect to any wireless network (SSID∗) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access. ∗SSID is a name for identifying a particular wireless network for transmission.

●

Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.

●

Data transmitted and received over radio waves may be intercepted and monitored.

●

The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, microwaves, mobile phones and the devices that use 2.4 GHz and 5 GHz signals when using the built-in wireless LAN.

●

When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV off with Mains power On / Off switch, then turn it on again.

●

Additional information for built-in wireless LAN and access point may be on the following website.

http://panasonic.jp/support/global/cs/tv/

Safety Precautions

Accessories / Options

Standard accessories

Remote Control

●

N2QAYB000748

Batteries for the Remote Control (2)

●

R6 (AA)

(p. 7)

Pedestal (p. 7)

Accessories / Options

Mains lead

(p. 12)

Terminal adaptors Fall-prevention parts

●

AV2 IN (COMPONENT / VIDEO) adaptor

(p. 82, 83)

●

Accessories may not be placed all together. Take care not to throw them away unintentionally.

●

This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.

●

(p. 82)

Clamper (p. 14)

AV1 IN / AUDIO OUT adaptor

Operating Instructions with Warranty statement

(p. 9)

Optional accessories

Please contact your local Panasonic dealer to purchase the recommended optional accessories. For additional details, please read the manual of the optional accessories.

Communication Camera

●

TY-CC20W

●

This camera can be used on VIERA Connect (p. 18, 74).

●

Depending on the area, this optional accessory may not be available. For details, consult your local Panasonic dealer.

Installing / removing remote’s batteries

Note the correct polarity (+ or -)

Pull Open

Hook

Caution

●

Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

●

Do not mix old and new batteries.

●

Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese batteries).

●

Do not use rechargeable (Ni-Cd) batteries.

●

Do not burn or break up batteries.

●

Do not expose batteries to excessive heat such as sunshine, fire or the like.

●

Make sure you dispose of batteries correctly.

●

Ensure batteries are replaced correctly, there is danger of explosion and fire if battery is reversed.

●

Do not disassemble or modify the remote control.

Attaching / removing the pedestal

Warning

Do not disassemble or modify the pedestal.

●

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than the one provided with this TV.

●

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

●

If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.

●

If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Ensure that the TV does not fall over.

●

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.

Two or more people are required to install and remove the TV.

●

If two or more people are not present, the TV may be dropped, and personal injury may result.

When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified procedure. (p. 8)

●

Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.

Accessories / Options

Assembly screw (4)

(silver)

M5 × 16

Assembly screw (5)

(black)

Accessories / Options

M4 × 10

Bracket

●

■ Assembling the pedestal

Attach the bracket to the tabs of the top of the

base and fix with assembly screws

Tabs (top)

TBL5ZA3238

Cover

●

TXFBL5Z0071

Attach the cover and fix securely with assembly

screw

Base

●

TBL5ZX04921

■ Securing the TV

Use the assembly screws to fasten securely.

●

Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely.

●

Carry out the work on a horizontal and level surface.

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws 2 Pull out the pedestal from the TV.

3 Remove the assembly screw 4 Pull out the cover.

5 Remove the assembly screws from the bracket.

from the cover.

from the TV.

Arrow mark

Hole for pedestal installation

Preventing the TV from falling over

This TV could fall over if it is pushed, pulled or knocked down. We therefore recommend the TV is secured to the furniture as illustrated.

●

This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in all cases.

Band

Screw

Wood screw

Securing to a furniture

Fix pedestal and furniture together with band.

●

This image is for illustrative purposes only.

Screw

Band

Wood screw

Hanging the TV on the wall

Choosing to wall mount the TV shall be done at the owner's risk. Always use a qualified installer to perform a TV wall bracket installation. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. Any such damage will void your warranty.

●

Holes for wall-hanging bracket installation

400 mm

Rear of the TV

(View from the side)

Warning

●

When optional accessories such as wall brackets etc. are used, always read and follow the manufactures installation and usage instructions.

●

Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts.

●

When installing wall brackets you must ensure the wall bracket is not electrically grounded to metal wall studs. Always ensure that there are no electrical cables, pipes etc. in the wall before you begin the wall bracket installation.

●

To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.

Depth of screw:

minimum 8 mm maximum 10 mm

Type of screw: M6

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

Accessories / Options

Identifying Controls

Remote Control

2 3

Identifying Controls

4 5

Standby On / Off switch

●

Switches TV on or off standby.

Sound Selection

●

Changes the sound track in Digital TV (if available).

●

Changes multiplex sound mode in Analogue TV (if available).

[Main Menu] (p. 31)

●

Press to access Picture, Sound, Network, Timer and Setup Menus.

Information (p. 20)

●

Displays channel and programme information.

VIERA TOOLS (p. 30)

●

Displays some special feature icons and accesses easily.

INTERNET ([VIERA Connect]) (p. 18, 74)

●

Displays VIERA Connect home screen.

(p. 85)

15 16

22 23

●

Confirms selections and choices.

●

Press after selecting channel positions to quickly change channel.

●

Displays the Channel List.

[Option Menu] (p. 21)

●

Easy optional setting for viewing, sound, etc.

Teletext

●

This button is not used for this model.

●

Switches to teletext mode. (p. 26)

Subtitles (p. 20)

●

Displays subtitles.

Numeric buttons

●

Changes channel.

●

Changes channel and teletext pages.

●

Sets characters.

●

When in Standby mode, switches TV on.

Sound Mute

●

Switches sound mute on or off.

Volume Up / Down

Input mode selection

●

PC - switches to PC input mode. (p. 28)

●

TV - switches Digital TV / Analogue TV.

(p. 19)

●

AV - switches to AV input mode from Input

Selection list. (p. 28)

Aspect (p. 21)

●

Changes aspect ratio.

TV Guide (p. 23)

Freeview Guide Exit

●

Returns to the normal viewing screen.

[Media Player] (p. 56)

●

Switches to SD Card and USB device viewing / listening mode.

Cursor buttons

●

Makes selections and adjustments.

Return

●

Returns to the previous menu / page.

Coloured buttons

●

Used for the selection, navigation and operation of various functions.

Hold

●

Freeze / unfreeze picture. (p. 20)

●

Holds the current teletext page (teletext mode).

Index

●

This button is not used for this model.

●

Returns to the teletext index page (teletext mode).

Last view (p. 22)

●

Switches to previously viewed channel or input mode.

Channel Up / Down

Operations for contents, connected equipment,

etc.

(p. 26)

(p. 29, 54, 56, 71, 80)

(p. 25)

Indicator / Control panel

mode

RETURN

Function select

●

[Volume] / [Backlight] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Digital TV Auto Tuning] / [Analogue TV Auto Tuning] ∗ [Music] or [Speech] mode in the Sound Menu

Channel Up / Down, Value change (when using the

F button), Switching the TV on

Changes the input mode

Mains power On / Off switch

●

Use to switch the mains power.

5 6 7

If you turned the TV off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV on with Mains power On / Off switch.

●

When pressing the control panel button (1 - 4), the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button.

Remote control signal receiver

●

Do not place any objects between the TV remote control signal receiver and remote control.

C.A.T.S. (Contrast Automatic Tracking System)

sensor

●

Senses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On].

(p. 32)

Power and Timer LED

Red: Standby Green: On Orange: Timer Programming On Orange (flash):

Recording of Timer Programming in

•

progress One Touch Recording in progress

•

Red with orange flash:

Standby with Timer Programming On

•

Standby with One Touch Recording

•

●

The LED blinks when the TV receives a command from the remote control.

Using the On Screen Displays - Operation guide

Many features available on this TV can be accessed via the On Screen Display menu.

■ Operation guide

Operation guide will help you to operate by using the remote control.

Example: [Sound Menu]

Main Menu

Change

han

Operation guide

Mode Music

Picture

Bass Treble

Sound

Balance Headphone Volume

Network

Surround Auto Gain Control

Timer

Volume Correction Speaker Distance to Wall

Setup

Select

elec

Selects your favourite sound

elects your favourite sound

EXIT

mode.

RETURN

Off Off

Over 30cm

Page up

Page u

Page down

Page dow

■ How to use remote control

Open the main menu

Move the cursor / select from a range of options /

1/2

0 0 0

select the menu item (up and down only) / adjust levels (left and right only)

Access the menu / store settings after adjustments have been made or options have been set

Return to the previous menu

Exit the menu system and return to the normal viewing screen

Rear side of the TV

Identifying Controls

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:

No signal is received and no operation is performed for 30 minutes in Analogue TV.

•

[Off Timer] is active in the Timer Menu. (p. 21)

•

No operation is performed for the period selected in [Auto Standby] (p. 36).

•

●

This function does not affect the recording of Timer Programming and One Touch Recording.

Basic Connection

●

■

●

External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

Terminals

Basic Connection

SD Card slot (p. 51, 55)

USB 1 - 2 (p. 51, 55, 83)

HDMI1 - 4 (p. 13, 82)

Headphone jack (p. 83)

6 7 8 9 10 5

Connections

Mains lead and aerial

Mains lead

AC 220-240 V 50 / 60 Hz

ETHERNET (p. 14, 66)

Antenna terminal (see below)

DIGITAL AUDIO OUT (p. 82)

PC (p. 83)

AV1 IN / AUDIO OUT (p. 82)

AV2 IN (p. 82, 83)

■ Digital TV, Analogue TV

RF cable

■ Mains lead

Insert the mains plug (supplied) firmly into place.

●

When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.

Aerial

Note

●

Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.

●

Do not place the RF cable under the TV.

●

To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the correct terminating plug are required.

●

If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV.

●

Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required.

●

Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.

AV devices

■ Player

Player

Basic Connection

■ DVD Recorder / VCR

■ Set top box

HDMI cable

RF cable

Aerial

DVD Recorder / VCR

RF cable

Satellite dish

Set top box

Note

●

VIERA Link connection (p. 75, 76)

●

Please also read the manual of the equipment being connected.

●

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

●

When using a HDMI cable, use the fully wired one.

●

Check the type of terminals and cable plugs are correct when connecting.

Network

●

To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment.

●

If you do not have any broadband network services, please consult your retailer for assistance.

●

Prepare the internet environment for wired connection or wireless connection.

●

Setup of the network connection will start after the tuning (when first using the TV). (p. 15 - 17)

■ Wired connection

Basic Connection

LAN cable (Shielded)

●

■ Wireless connection

Access point

Built-in wireless LAN

Using clamper

●

Do not bundle the RF cable and mains lead together (could cause distorted image).

●

Fix cables with clampers as necessary.

●

When using the optional accessory, follow the option’s assembly manual to fix cables.

Internet environment

Use the Shielded Twist Pair (STP) LAN cable.

Internet environment

■ Clamper (Standard accessory)

Attach the clamper Bundle the cables

Insert the clamper in a hole

To remove from the TV: To loosen:

snaps

Keep pushing both side snaps

hole

hooks

knob

Set the tip in the hooks

Keep pushing the knob

Auto Tuning

Search and store TV channels automatically.

●

These steps are not necessary if the setup has been completed by your local dealer.

●

Please complete connections (p. 12 - 14) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.

Plug the TV into mains socket and switch on

●

Takes a few seconds to be displayed.

●

If the red LED shows on the TV, press the Standby On / Off switch on the remote control.

Select your area

Select State / Territory

New South Wales / Australian Capital Territory

Select the mode to tune

TV Signal Selection

Select [Start Auto Tuning]

TV Signal Selection

●

Auto Tuning will start to search for TV channels and store them.

Victoria

Queensland

South Australia

Western Australia

Northern Territory

Tasmania

Digital TV

Analogue TV

Start Auto Tuning

Digital TV Analogue TV

Start Auto Tuning

select

set

select

tune / skip tuning

: tune (search for the available channels) : skip tuning

select

access

The stored channels and sorted channel order vary depending on the area, broadcasting system and conditions of signal reception.

Auto Tuning

Digital TV Scan Analogue TV Scan This will take about 6 minutes. RF Ch

CBBC Channel

BBC Radio Wales

Cartoon Nwk

62 29 33

Digital TV: 4 Analogue TV: 2

Setup the network connection

CH 6 69 CH 0 75

Channel Name

Searching

Type

Digital TV Digital TV Digital TV Digital TV Analogue TV Analogue TV

Quality

10 10 10 10

Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 18, 65).

●

Please note that this TV does not support wireless public access points.

●

Ensure the network connections (p. 14) and network environment are completed before starting setup.

Select the network type

Network Setup

Select Wired or Wireless

Wired Wireless Set later

[Wired] “Wired connection” (p. 14) [Wireless] “Wireless connection”

(p. 14)

select

access

To setup later on or skip this step

Select [Set later] or

●

Auto Tuning

●

■ [Wired]

1. Select [Auto]

Acquire IP Address

Auto Manual

select access

2. Go to the next step

(Press twice)

■ [Wireless]

Access points found automatically are listed.

1. Select your desired access point

Available Wireless Networks

No. Network Name(SSID) Status Wireless type

1 2 3

Access Point A Access Point B Access Point C

11n(2.4GHz) 11n(5GHz) 11n(5GHz)

Connection Test

Check network cable connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.

Automatically setup is done and the test of the network connection starts.

●

To set manually, select [Manual] and set each item. For details

(p. 68)

select

access

: Encrypted access point

: succeeded

The test is successful and the TV is connected to the network.

: failed

Check the settings and connections. And then select [Retry].

●

For the information of the highlighted access point

●

To search access points again

●

To set [WPS(Push button)] (p. 17)

2. Access the encryption key input mode

Encryption Key Setting

Connection will be made with the following settings: Network Name(SSID) : Access Point A Security type : WPA-PSK Encryption type : TKIP

Please input the encryption key.

Encryption key

●

If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point.

3. Enter the encryption key of the access point

Wireless Network Settings

Encryption key

A B C D E F G H I J K L M N O P Q R S T

U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #

a b c d e f g h i j k l m n o p q r s t

u v w x y z ( ) + - . _ @ / “ ‘ % & ?

, ; = $ [ ] ~ < > { } | ` ^ \

Set characters

select

set

●

You can set characters by using numeric buttons. (p. 91)

4. After the access point setting is finished, perform the connection test

Connection Test

Check wireless network connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.

5. Go to the next step

(Press twice)

●

To set manually (p. 70)

Store

: succeeded

The test is successful and the TV is connected to the network.

: failed

Check the settings and connections. And then select [Retry]. To set manually, select [Manual] and set each item. For details

(p. 70)

[WPS(Push button)]

1. Press the WPS button on the access point until the light flashes

2. Connect the TV with the access point

WPS(Push button)

1) Please press the 'WPS' button on the wireless access point until its light flashes.

2) When the light is flashing select ‘Connect’ on TV.

If you are unsure, please check the instruction manual of the wireless access point.

Connect

●

Ensure that your access point supports WPS for this setup.

●

WPS: Wi-Fi Protected Setup™

●

If the connection has failed, check the settings and positions of your access point. And then, follow the on-screen instructions.

3. After the access point setting is finished, perform the connection test

Connection Test

Check wireless network connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.

4. Go to the next step

: succeeded

The test is successful and the TV is connected to the network.

: failed

Check the settings and connections. And then select [Retry].

(Press twice)

Select [Home]

Select [Home] viewing environment to use in your home environment.

Please select your viewing environment.

Home Shop

select

set

■ [Shop] viewing environment (for shop display only)

[Shop] viewing environment is the demonstration mode to explain main features of this TV.

Select [Home] viewing environment to use in your home environment.

●

You can return to viewing environment selection screen at the stage of Shop confirmation screen.

1 Return to viewing environment

selection screen

Shop

You have selected shop mode

To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.

[Shipping Condition] (p. 47)

2 Select [Home]

Please select your viewing environment.

Home Shop

Auto Tuning

select set

Auto Tuning is now complete and your TV is ready for viewing

If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.

Note

●

To check the channel list “Using TV Guide ” (p. 23)

●

To edit or hide (skip) channels “Tuning and Editing Channels” (p. 39 - 42)

●

To retune all channels [Auto Tuning] in “Tuning and Editing Channels” (p. 41, 42)

●

To add the available TV mode later [Add TV Signal] (p. 37)

●

To initialise all settings [Shipping Condition] (p. 47)

Using “VIERA Connect”

■

VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen.

●

Some features of the websites may not be available.

Turn power on

Using “VIERA Connect”

■

To exit from VIERA Connect

●

To set the VIERA Connect introduction banner display off

[VIERA Connect

Banner] (p. 37)

●

Every time you turn on the TV, VIERA Connect introduction banner appears. The banner is subject to change.

Enjoy selected internet content with VIERA Connect.

Simply press the OK / INTERNET button

Access VIERA Connect

While the banner is displayed

●

Depending on the usage conditions, it may take a while to read all the data.

●

Messages might be displayed before VIERA Connect home screen. Please read these instructions carefully and follow the on-screen instructions.

Example: VIERA Connect home screen

BACK

●

Mains power On / Off switch should be on. (p. 11)

●

To go to the next level, select [MORE].

●

To back to the previous level, select [BACK].

●

To return to VIERA Connect home screen

●

Video communication requires an exclusive Communication Camera TY-CC20W.

“Optional accessories” (p. 6)

For details, read the manual of the Communication Camera.

●

You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect. You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features. For more information

“USB connection” (p. 91)

Note

●

If you cannot access VIERA Connect, check the network connections (p. 14) and settings (p. 15 - 17).

●

For more information of VIERA Connect (p. 74)

Watching TV

Turn power on

Every time you turn on the TV, this banner appears at the bottom of the screen. You can access to VIERA Connect easily and enjoy the various contents.

●

Select Digital TV or Analogue TV

Digital TV

●

Mains power On / Off switch should be on. (p. 11)

■ VIERA Connect introduction banner appears

To remove this banner, leave for about 5 seconds or press any buttons (except the buttons to access VIERA Connect). To set this banner display off [VIERA Connect Banner] (p. 37) The banner is subject to change.

(p. 18)

The selected mode is displayed.

●

You can also select the mode pressing the TV button repeatedly on the TV (p. 11).

Watching TV

All Digital Channels

8:35 pm

Information banner appears whenever you select a channel

●

To select a more than two-digit channel position number, e.g. 399

(p. 20)

Coronation Street

8:00 pm - 8:55 pm

BBC ONE WALES

Now

: PG

Rating

Select a channel

down

■ To select from the Channel List

All Digital Channels

6 Cartoon Nwk 7 BBC Radio Wales 8 BBC Radio Cymru

1 BBC ONE Wales

2 BBC THREE 3 BBCi 4 CBBC Channel

select channel

watch

■ To select a channel using Information banner (p. 20)

1 Display Information banner if it is not displayed 2 While the banner is displayed, select the channel

select channel

watch

■ To select a channel using TV Guide (p. 23, 25)

1 Display TV

Guide

2 Select the current

programme or channel

select

access

3 Select [View] (Digital TV)

Emerald 11:00 am - 11:30 am

View

Timer Programming

select

watch

Other useful functions

S s d

●

■

Display Information banner

●

Also appears when changing a channel.

Example: Digital TV

BBC ONE WALES

Channel position and name

Channel type ([Radio], [Data], etc.) /

Encrypted channel ( ) / TV mode ( , )

Programme

Features available / Message meanings

Watching TV

Sound mute on

[Rating]

Rating information

[Bad signal]

Poor TV signal quality

●

To confirm another tuned channel name

(p. 85)

Rating

3 4 5

Coronation Street 8:00 pm - 8:55 pm

Now

: PG

Current time

Programme Start / Finish time (Digital TV)

Channel number, etc. (Analogue TV) Category

[AD]

Audio Description service available

●

This function can aid visuallyimpaired viewers by adding an additional audio track to describe events on-screen.

●

For settings (p. 35)

Subtitle service available

●

To watch the channel listed in the banner

8:35 pm

All Digital Channels

Multiple image or audio available

Teletext service available

, ,

Audio mode (p. 85) 1 - 90

Off Timer remaining time

●

For settings (p. 21)

●

Information on the next programme (Digital TV)

[

(

[

(

●

To hide

●

To update the TV software (if available)

●

Display subtitles

Display / hide subtitles (if available)

●

To change the language (if available), press the buttons repeatedly.

Hold

Freeze / unfreeze picture

Extra information (Digital TV)

(Press again to hide the banner)

●

To set display timeout

[Banner Display Timeout] (p. 37)

To select a favourite list (Digital TV)

if the favourite list is created in [Favourites Edit]

(p. 39)

Display the selectable settings for the current status

Confirm or change the current status instantly

●

To change

select

access

[Audio Description] (Digital TV) Sets to [Auto] if the programme has Audio Description service, then you will hear an additional audio track to describe events on screen

●

To adjust the volume for Audio Description (p. 35)

[Video Selection] (Digital TV) Selects the image (if available)

[Audio Selection] (Digital TV) Selects between alternative language for sound tracks (if available)

[Audio Selection / AD] (Digital TV) Selects between alternative languages for sound tracks (if available)

select / change

store

[Dual Audio] (Digital TV) Selects stereo / monaural (if available)

[Subtitle Language] (Digital TV) Selects the language in which subtitles should appear (if available)

[MPX] (Analogue TV) Selects multiplex sound mode (if available)

(p. 34)

[Volume Correction]

Adjusts volume of individual channel or input mode

[Safely remove USB]

Takes this operation to remove the connected USB device safely from the TV

Off Timer

Turn the TV to Standby mode automatically after a fixed period

1 Display the menu

2 Select [Timer]

Timer

select

access

3 Select [Off Timer] and set the time in 15-minute increments

Timer Programming

Off Timer

Auto Standby

Off

15 30 45 60 75 90

minutes minutes minutes minutes minutes minutes

select [Off Timer]

access

●

To cancel, set to [Off] or turn the TV off.

●

To confirm the remaining time “Display Information banner” (p. 20)

●

When the remaining time is within 3 minutes, the remaining time will flash on the screen.

Watching TV

select the time

store

Aspect

Change the aspect ratio (image size)

Enjoy viewing the image at its optimum size and aspect. (Press repeatedly until you reach the desired mode.)

■ To change the aspect ratio manually (if available)

1 Display Aspect Selection list 2 While the list is displayed, select the mode

Aspect Selection

16:9

14:9 Just 4:3 4:3 Full Zoom1 Zoom2 Zoom3

Select

EXIT

Change

RETURN

Aspect Selection list

select

store

●

You can also change the mode only using the ASPECT button.

[16:9] [4:3 Full]

T a

●

■

[14:9] [Zoom1]

[Just] [Zoom2]

[4:3] [Zoom3]

Directly displays the image at 16:9 without distortion (anamorphic).

Displays the image at the standard 14:9 without distortion.

Displays a 4:3 image full-screen. Stretching is only noticeable at the left and right edges.

Displays the image at the standard 4:3 without distortion.

Displays a 4:3 image enlarged horizontally to fit the screen.

●

For Digital TV or HD signal

Displays a 16:9 letterbox or 4:3 image without distortion.

Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.

Displays a 2.35:1 letterbox (anamorphic) image full-screen without distortion. At 16:9, displays the image at its maximum (with slight enlargement).

Note

Watching TV

●

Only [16:9] and [4:3 Full] are available in Digital TV.

●

Aspect is fixed to [16:9] in Digital TV.

●

Only [16:9] and [4:3] are available in PC input mode.

●

Aspect cannot be changed in teletext service.

●

Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals except in Digital TV.

Last view

Switch to previously viewed channel or input mode easily

●

Press again to return to the current view.

Note

●

Switching channel is not available while the recording of Timer Programming or One Touch Recording is in progress.

●

Switching channel is not available while the recording of One Touch Recording is in progress.

●

Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.

Standard Time / Summer Time

■ Region Select - Adjust the standard time

Select the region where you live to adjust the standard time.

●

The time contained in the broadcast signal is UTC (Universal Time coordinated) formally known as GMT (Greenwich Mean Time).

■ Daylight Saving Time - Adjust for Summer Time

Select time offset from the standard time for Summer Time.

●

Normally select [Auto].

●

If there is a gap between displayed time and actual time, set this function.

Region Standard time Daylight Saving Time : Auto (During Summer Time)

NSW / ACT Victoria Queensland +10:00 South Australia +9:30 +10:30 Western Australia +8:00 Northern Territory +9:30 Tasmania +10:00 +11:00

●

These items can be set from [Other Settings] in the Setup Menu. (p. 38) (Based on GMT)

+10:00 +11:00

)

Using TV Guide

TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters).

●

Digital TV and Analogue TV channels are displayed on the same TV Guide screen. [D] means Digital TV channel and [A] means Analogue TV channel. There will be no programme listings for Analogue channels.

●

When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before TV Guide is completely shown.

Select the mode

(p. 19)

View TV Guide

●

Press again to change the layout ([Landscape] / [Portrait]). View [Landscape] to see several channels. View [Portrait] to see one channel by time.

Example: [Landscape]

TV Guide: Landscape

Wed 26 Oct 2011

11 Home 11:30 am - 12:00 pm DIY SOS : We open in the Battersbys

11:00 am 11:30 am 12:00 pm 12:30 pm 1:00 pm

Time:

East ender DIY SOS The Bill

Home

11D

Hot Wars Holiday Program

World

Emerald

Jade

10 O’ clock News BBC

Pearl

Sapphire

100

Ruby

101

Gold

102

Coronation Street

Topics NewsShopping

Pepsi Char. Business NewsMarket News Drama 2Drama 1

All Types

Wed 26 Oct

2011 10:27 am

All Channels

Red Cap

Sports Live junction

The Bill

Drama

Good bye NEWS

Live

5 6

Current date and time

TV Guide date

TV Guide time

Programme

[D]: Digital TV

[A]: Analogue TV Channel position and

name

Using TV Guide

■

To return to TV

Example: [Portrait]

TV Guide: Portrait

Wed 26 Oct 2011

HomeD 11 WorldD 16 JadeD 81 PearlD 84 SapphireD 100

11:00 am - 12:30 pm

12:30 pm - 2:00 pm

2:00 pm - 02:30 pm

2:30 pm - 03:00 pm

3:00 pm - 03:30 pm

3:30 pm - 04:30 pm

4:30 pm - 5:00 pm

5:00 pm - 5:30 pm

Das Erste

DIY SOS

Red Cap

Live junction

POP 100

Rugby

News

Wed 26 Oct

All Types All Channels

2011 10:27 am

■ To watch the programme

1 Select the current programme

or channel

select

access

■ To the previous day (Digital TV)

2 Select [View] (Digital TV)

Emerald 11:00 am - 11:30 am

View

Timer Programming

■ To the next day (Digital TV)

select

●

watch

To use Timer Programming (p. 24)

■ To view a channel list of the selected type

U T b

■

●

■ To view a channel list of the selected category

(Digital TV)

All Types

Movie

News

(Type list)

Prog.Type

All Types

select type

view

(Category list)

Favourites

All Channels

All Digital Channels

All Analogue Channels

Favourites1

Favourites2

Favourites3

Favourites4

select category

view

Only Analogue channels are listed

●

To list favourite channels

(p. 39)

Other useful functions

View details of the programme (Digital TV)

1 Select the programme 2 View details

●

Press again to return to TV Guide.

Using TV Guide

Timer Programming (Digital TV)

The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.

1 Select the forthcoming programme 2 Select the function ([USB HDD Rec.], [SD Card Rec.] or [Reminder])

select

set

●

LED will turn to orange if Timer Programming is set. (Orange LED will flash if the recording of Timer Programming is in progress.)

“Indicator / Control panel” (p. 11)

■ To check / change / cancel a timer

programming event

“Timer Programming” (p. 43 - 45)

(Timer Programming screen)

Timer Programming

Function No. Channel Name Date Start End

USB HDD Rec.

D 12 ABC 1

<TIMER>

--- --/-- --:-- --:-----

--- --/-- --:--

---

--- --/-- --:-- --:-----

Wed 26 Oct

2011 10:46 am

8:00 pm

8:30 pm

(30 min.)

(--- min.)

--:--

[USB HDD Rec.] / [SD Card Rec.] / [Reminder]

“Set timer programming event details” (p. 44)

■ To return to TV Guide

select

store

■ If you select the current programme

A confirmation screen asking whether you want to watch or record the programme appears. Select [Timer Programming] and set [USB HDD Rec.] or [SD Card Rec.] to record from the time you finish the timer programming event setting.

Emerald 11:00 am - 11:30 am

View

Timer Programming

Note

●

This function is not available in Analogue TV.

●

Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider.

●

No other channel can be selected while the recording of Timer Programming is in progress.

●

When recording programmes to the USB HDD, be sure to format the USB HDD and enable it to record in [Recording Setup]. When recording programmes to the SD Card, prepare the appropriate SD Card. For more information of the USB HDD / SD Card Recording

(p. 51, 89)

select access

Using the Freeview Guide (Digital TV)

Using the Freeview Guide enables you to select a programme easily, view programme information, etc. The Freeview Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the future broadcasts over the next seven days (depending on the broadcasters).

View the Freeview Guide

Each time pressed, the screen will be switched between the Freeview Guide Listing and What’s on Now / Next.

■

To return to TV

Example: Freeview Guide Listing

Programme

Wed 6 Apr

Next WeekChnl Next Day

EPG/Guide

Now/Next

Description

currently viewed

Sayid confronts Ben's spy on the freighter, and Ben urges daughter Alex to flee Locke's camp in order to survive an impending attack.

Parental Rating captioning Information

Current day & date

20:30 Lost

21:30 Dirty Sexy Money

22:30 The Knights Of

Prosperity

22:55 Entourage

23:30 Reality Bites:

Bodyshock - Half Ton...

Prog

Watch TV

Current channel’s programme listing

Example: What’s on Now / Next

Current time & date

2 TV2 Now Lost20:30

3TV3

4C4

5Māori Television

6TVNZ6

Chnl

Watch TV

Next Dirty Sexy Money21:30

Now Criminal Intent20:30

Next Law & Order21:30

Now Celebrity Joker Poker20:30

Next It's Always Sunny In Philadelp...21:30

Now NZ Doco: Children of the Revol...20:30

Next Te Tepu21:30

Now Talk Talk20:30

Next The Gravy21:30

EPG/Guide

Listings

Channel listing

TV ONE, 20:00

Parental rating & captioning information

20:00 Wed 6 AprWhat's on now/next.

■

To the previous day

■

To the next day

■

To scroll through programme or channel

programme

channel

■

To watch the highlighted programme

■

To scroll through channels

■

To watch the highlighted programme

■

To return to the Freeview Guide Listings

Using the Freeview Guide (Digital TV)

Note

●

When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before the Freeview Guide is completely shown.

●

The Freeview Guide screen and operations are subject to change without notice.

Viewing Teletext

●

C c

■

C w

■

●

Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters.

What is FASTEXT mode?

In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriate coloured button. This facility enables fast access to information on the subjects shown.

What is List mode?

In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV’s memory.

■ To change mode [Teletext] (p. 37)

Switch to Teletext

Sub page number

<< 01 02 03 04 05 06 07 >>

Viewing Teletext

Current page number

Select the page

■ To adjust contrast

■

To return to TV

Reveal hidden data

Reveal hidden words e.g. quiz page answers

●

HOLD

Stop automatic updating

(If you wish to hold the current page without updating)

●

Press again to resume.

(Press three times)

Press again to hide.

“Store frequently viewed pages” (p. 27)

17:51 28 Feb

Time / date

TELETEXT

INFORMATION

Colour bar

down

INDEX

Return to the main index page

Call up a favourite page

View a favourite page stored

Call up the page stored on the blue button (List mode).

●

Displays the index page (content varies depending on the broadcasters).

Coloured button

(Corresponds to the colour bar)

As the blue bar is displayed

Factory setting is “P103”.

(

FULL / TOP / BOTTOM

(TOP) (BOTTOM) Normal (FULL)

(Expand the TOP half)

(Expand the BOTTOM half)

View in multi window

Watch TV and Teletext in two windows at once

(Press twice)

●

Operations can be made only in teletext screen.

Select Picture and text on or off

Store frequently viewed pages

Store frequently viewed pages in the colour bar (List mode only)

As page is displayed

Corresponding coloured button

press and hold

■ To change stored pages

Coloured button you want to change

View sub page

View sub page (Only when Teletext is more than one page)

Enter new page number

Appears at top of the screen

●

■ To view specific sub page

Enter the 4-digit number Example: P6

Viewing Teletext

The number changes to white.

press and hold

The number of sub pages varies depending on the broadcasters. It may take some time for searching, during which time you can watch TV.

Watch TV while waiting for update

View the TV picture while searching for a teletext page

Teletext automatically updates itself when new information becomes available.

●

The news page provides a function that indicates arrival of the latest news (“News Flash”).

Changes to TV screen temporarily

P108

(You cannot change the channel.)

Appears when updating is completed

View the updated page

Watching External Inputs

E C

E s

●

Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.

●

To connect the equipment (p. 12 - 14, 82 - 84)

The remote control is capable of operating the contents or external equipment.

Turn the TV on

If input mode is not switched automatically

Perform and

●

Check the setup of the equipment.

Display the input selection menu

When viewing PC, press the PC button and go to the step

Select the input mode connected to the equipment

Watching External Inputs

Input Selection

AV 1

AV 2

PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB

●

You can also select the input using the AV button on the remote control or the TV (except [SD Card/USB]). Press the button repeatedly until the desired input is selected.

●

To switch between [COMPONENT] and [VIDEO] in [AV2], move the indicator by pressing left and right cursor button.

●

[SD Card/USB]: Switches to Media Player. “Using Media Player” (p. 55)

●

You can label or skip each input mode (except [SD Card/USB]).

“Input Labels” (p. 37)

Skipped inputs will not be displayed when the AV button is pressed.

(p. 29)

select

watch

■

To return to TV

View

AV1

Displays the selected mode

Note

●

If the external equipment has an aspect adjustment function, set it to [16:9].

●

For details, read the manual of the equipment or ask your local dealer.

Operating contents or the equipment with the TV remote control

You can operate the contents in Media Player / media servers, recording functions or the connected equipment.

Standby

Set to Standby mode / Turn on

Play

Playback videocassette / DVD

Stop

Stop the operations

Rewind / Skip / Search

VCR: Rewind, view the picture rapidly in reverse DVD / video content: Skip to the previous track, title or chapter (not available for the

Fast-forward / Skip / Search

VCR: Fast-forward, view the picture rapidly forward DVD / video content: Skip to the next track, title or chapter (not available for the operation of

Pause

Pause / Resume DVD: Press and hold to play at slow speed

Programme Up / Down

Select programme

Record

Start recording

operation of USB HDD / SD Card Recording for E55Z series) Press and hold to search backward

USB HDD / SD Card Recording for E55Z series) Press and hold to search forward

How to change the code

Each type of the Panasonic equipment has its own remote control code. Change the code according to the equipment you want to operate.

Watching External Inputs

Press and hold

Enter the appropriate code, see table below

during the following operations

Type of the equipment, features Code

DVD Recorder, DVD Player, Blu-ray Disc Player 70 (default)

Player theatre, Blu-ray Disc theatre 71

VCR 72

Using USB HDD / SD Card Recording

Using in Video mode of Media Player

Using in Video mode of DLNA (p. 71)

The equipment using in VIERA Link

Press

(p. 54)

(p. 56)

(p. 80)

Note

●

Confirm if the remote control works correctly after changing the code.

●

The codes may be reset to default values if batteries are replaced.

●

Some operations may not be possible on some equipment models.

How to Use VIERA TOOLS

■

●

■

●

You can access some special features easily by using the VIERA TOOLS function.

Display icons of the feature

Select a feature

select

VIERA Link

■

To return to TV

How to Use VIERA TOOLS

■ Follow the operations of each feature

∗

When two or more available devices are connected, a selection screen will be displayed.

Please select the correct description and access.

Note

●

If the selected feature is not available, the demonstration to explain how to use it can be displayed. Press the OK button to view the demonstration after selecting the unavailable feature.

[VIERA Link]

(p. 78 - 81)

∗

[Photo]

(p. 57)

∗

[Video]

(p. 60)

[Recorded TV]

(p. 61)

[Music]

∗

(p. 64)

[VIERA Connect]

(p. 18, 74)

[Media Server]

(p. 71)

access

∗

+ 70 hidden pages

Panasonic E55A Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual