QUICK GUIDE / GUÍA RÁPIDA
GUIDA RAPIDA / KURZANLEITUNG
GUΙA RÁPIDO / SNELLE GIDS
ENGLISH 2 ~ 11
Before operating the unit, read these operating
instructions thoroughly and keep them for future
reference.
ESPAÑOL 12 ~ 21
Antes de utilizar la unidad, sírvase leer atentamente
estas instrucciones de funcionamiento y conservarlas
como futuro elemento de consulta.
ITALIANO 22 ~ 31
Prima di utilizzare l’unità si prega di leggere
attentamente le istruzioni e di conservare questo
opuscolo per potervi fare riferimento in futuro.
DEUTSCH 32 ~ 41
Bevor Sie das Gerät in Betrieb nehmen, lesen Sie bitte
diese Bedienungsanleitung aufmerksam durch und
bewahren Sie sie für die künftige Verwendung auf.
PORTUGUÊS 42 ~ 51
Antes de ligar a unidade, leia cuidadosamente
este manual de utilização e guarde-o para futura
referência.
F566080
Operating Instructions
Air Conditioner
Indoor Unit
CS-F18DTE5 CS-F34DTE5
CS-F24DTE5 CS-F43DTE5
CS-F28DTE5 CS-F50DTE5
Outdoor Unit
Inverter Model
(HBE5 Series) (DBE5, DBE8 Series)
CU-YL24HBE5 CU-L24DBE5
CU-YL28HBE5 CU-L28DBE5
CU-YL34HBE5 CU-L34DBE5
CU-YL43HBE5 CU-L43DBE5
(GBE5 Series) CU-L34DBE8
CU-YL24GBE5 CU-L43DBE8
CU-YL28GBE5 CU-L50DBE8
CU-YL34GBE5
CU-YL43GBE5
Heat-pump Model
CU-B18DBE5 CU-B28DBE8
CU-B24DBE5 CU-B34DBE8
CU-B28DBE5 CU-B43DBE8
CU-B34DBE5 CU-B50DBE8
Cooling Model
CU-J18DBE5 CU-J24DBE8
CU-J24DBE5 CU-J28DBE8
CU-J28DBE5 CU-J34DBE8
CU-J34DBE5 CU-J43DBE8
CU-J50DBE8
NEDERLANDS 52 ~ 61
Lees voor u het apparaat gebruikt deze
gebruiksinstructies grondig en bewaar ze voor
toekomstig gebruik.
QUICK GUIDE / GUÍA RÁPIDA
GUIDA RAPIDA / KURZANLEITUNG
GUΙA RÁPIDO / SNELLE GIDS
© 2008 Panasonic HA Air-Conditioning (M) Sdn. Bhd.
(11969-T). All rights reserved. Unauthorized copying
and distribution is a violation of law.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS
Air outlet
Air outlet
Air inlet
Air inlet
Air inlet
DEFINITION
The instructions to be followed are classifi ed by the following symbols:
This symbol denotes an action
that is PROHIBITED.
To prevent personal injury, injury to others, or property damage, please observe the following.
Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classifi ed as below:
Warning
This sign warns of death or serious injury.
These symbols denote actions
that are COMPULSORY.
This sign warns of
Caution
injury or damage
to property.
Wireless Remote Control
• Do not use rechargeable
(Ni-Cd) batteries.
• Do not allow infants and
small children to play
with the remote control
to prevent them from
accidentally swallowing the
batteries.
• Remove the batteries if the
unit is not going to be used
for a long period of time.
• New batteries of the same
type must be inserted
following the polarity stated
to prevent malfunction of
the remote control.
Indoor Unit
• Do not install, remove and
reinstall the unit by yourself;
improper installation will
cause leakage, electric
shock or fi re. Please consult
an authorized dealer or
specialist for the installation
work.
• Do not insert your fi ngers or
other objects into the unit.
• Do not attempt to repair the
unit by yourself.
Air outlet
Air inlet
Indoor Unit
• Do not install the unit in a
potentially explosive atmosphere.
• Do not wash the unit with water,
benzene, thinner or scouring
powder.
• Do not use for other purposes
such as preservation of food.
• Do not use any combustible
equipment in front of the airfl ow
outlet.
• Do not expose directly to cold air
for a long period.
• Ensure that the drainage pipe is
connected properly. Otherwise,
leakage may occur.
• Aerate the room regularly.
Power Supply
• Switch off the power supply before
cleaning or servicing.
• Turn off the power supply if the
Power Supply
• Do not share the same power outlet with
other equipment.
• Do not modify power cords.
• Do not use extension cords.
• Do not operate with wet hands.
• Use the specifi ed supply cord.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualifi ed persons in
order to avoid a hazard.
• This equipment must be earthed and
strongly recommended to be installed
with Earth Leakage Circuit Breaker
(ELCB) or Residual Current Device
(RCD). Otherwise, it may cause electrical
shock or fi re in case of malfunction.
• In case of emergency or abnormal
conditions (burnt smell, etc), turn off the
power supply, and consult your nearest
dealer.
Air inlet
Air inlet
Air outlet
unit is not used for a long period
of time.
• This air conditioner is equipped
with a built-in surge protective
device. However, in order
to further protect your air
conditioner from being damaged
by abnormally strong lightning
activity, you may want to
disconnect it from the power
supply. Do not touch the air
conditioner during lightning, it may
cause electric shock.
Outdoor Unit
• Do not sit or step on the unit, you
may fall down accidentally.
• Do not touch the sharp aluminum
fi n, sharp parts may cause injury.
• Ensure that the drainage pipe is
connected properly. Otherwise,
leakage may occur.
Outdoor Unit
• Do not insert your fi ngers or other objects
• After long periods of use, make
sure the installation rack is not
damaged.
into the unit, sharp parts may cause
2
injury.
REGULATORY INFORMATION REGULATORY INFORMATION
TABLE OF CONTENTS
OPERATION CONDITION
NOTE :
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
OPERATION CONDITION
Use this air conditioner under the following temperature range
Model Temperature (°C) Indoor Outdoor
Inverter
(GBE5, DBE5,
DBE8 Series)
Heat-pump
Cooling COOLING
NOTICE: This unit is still able to operate as a cooler with outdoor temperature as low as
-15°C*/ -10°C** in a non-living room, such as a computer room, with a room
temperature of 21°C or above, and room humidity up to 45%.
(CU-YL24HBE5, CU-YL28HBE5, CU-YL34HBE5, CU-YL43HBE5)
COOLING
HEATING
NOTICE: This unit is still able to operate as a cooler with outdoor temperature as low
as -5°C in a non-living room, such as a computer room, with a room
temperature of 21°C or above, and room humidity up to 45%.
COOLING
HEATING
COOLING
HEATING
Temperature (°C) Indoor Outdoor
Maximum 32 43
Minimum 21 -15*
Maximum 27 24
Minimum 16 -20
Maximum 32 43
Minimum 21 -10**
Maximum 27 24
Minimum 16 -10
Maximum 32 43
Minimum 21 -10**
Maximum 32 43
Minimum 21 -5
Maximum 27 24
Minimum 16 -15
Thank you for purchasing
Air Conditioner
TABLE OF CONTENTS
SAFETY PRECAUTIONS
REGULATORY INFORMATION
PRODUCT OVERVIEW &
OPERATIONS
(WIRELESS REMOTE CONTROL)
PRODUCT OVERVIEW &
OPERATIONS
(WIRED REMOTE CONTROL)
CARE & CLEANING
TROUBLESHOOTING
QUICK GUIDE
NOTE :
The illustrations in this manual are
for explanation purposes only and
may differ from the actual unit. It is
subjected to change without notice
for future improvement.
BACK COVER
4~5
6~8
10~11
2
ENGLISH
3
9
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement
Pb
set by the Directive for the chemical involved.
• Do not switch ON the unit when waxing the fl oor. After waxing, aerate the room properly before operating the unit.
• Do not install the unit in oily and smoky areas.
3
ADDRESS
AUTO
AUTO
TIMER
ON
SETRESET ADDRES
S
MODE
MODE
AIR SW
ING
FAN SPEED
AIR SWING
TIMER
OFF/ON
SET
CANCEL
SELECT
CLOCK
FAN SPEED
FILTER RESET
MANUAL
ODOUR WASH
MODE
AUTO
ECONOMY
PRODUCT OVERVIEW & OPERATIONS
PRODUCT OVERVIEW & OPERATIONS
(WIRELESS REMOTE CONTROL)
(WIRELESS REMOTE CONTROL)
Horizontal airfl ow direction louver
Vertical airfl ow
direction louver
Remote control
display
Air fi lter
Intake grille
Transmitter
Maximum distances: 8m
Remote Control Preparation
Press and pull out
1
Insert AAA or R03 batteries
2
(can be used ~ 1 year)
3
Press CLOCK
Control Panel
POWER
TIMER
FILTER
ECONOMY
ODOUR WASH
AUTO
Ray receiver
Auto OFF/ON button
• To operate the unit if the wireless remote control
is misplaced or malfunctioning.
Action Mode
Press once. Auto
Press and hold until you hear 1 beep,
then release.
Cooling
1. Press and hold until you hear 2
beeps then release.
2. Press the
button for 5 seconds.
SET
Heating
Press the button to turn off.
Set time
4
Confi rm
5
Close the cover
6
3
6
Inverter / Heat-pump Model
CZ-RL513T
Cooling Model
CZ-RL013T
4
1
OFF/ON
TO TURN ON OR OFF THE
UNIT
POWER
TO SET TEMPERATURE
• Selection range: 16°C ~ 31°C.
4
5
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
2
• Unit selects operation mode according to temperature setting,
outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
(Applicable for Inverter / Heat-pump Model)
FAN mode - To enables air circulation in the room
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
• During soft dry operation, the indoor fan operates at a low fan
speed.
• The louvers movement might not align with the remote control
display.
TO SET DAILY TIMER
FAN SPEED
HINTS
OPTIONAL SETTINGS
TO SELECT FAN SPEED (3 OPTIONS)
LOW MEDIUMAUTO HIGH
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If the operation mode is set to Fan, the fan speed will
be fi xed at MEDIUM regardless of the temperature
setting.
AIR SWING
AUTO
TO ADJUST AIRFLOW
MANUAL
DIRECTION
• Keeps the room ventilated.
AUTO
• Auto Air Swing function optimize room comfort by
giving fi ner control over the airfl ow direction.
• The vertical airfl ow louver swings up and down
automatically.
• Do not adjust the vertical airfl ow direction louvers by
hand.
• Horizontal airfl ow direction louver is
manually adjustable.
MANUAL
• There are 4 options for manual vertical airfl ow
direction.
• The airfl ow direction can be adjusted as desired by
using remote control.
ECONOMY
TO REDUCE POWER
CONSUMPTION
ECONOMY
• Recommend to use when desired room temperature is
reached.
• Economy operation can be activated in all modes and
can be cancelled by pressing the respective button
again.
ODOUR WASH
ODOUR WASH
ODOUR REMOVING
• Applicable for all models.
• Helps to remove unpleasant odour from the
surrounding area during operation.
• To enable the odour removing function, press the
ODOUR WASH
once.
• To cancel, press the respective button again.
ODOUR CLEAR
• Applicable for Inverter model only.
• To remove odour and minimize the growth of odour
causing moulds in the air conditioner’s interior section.
• To enable this function, press the
ODOUR WASH
for more than
3 seconds.
• The unit will automatically perform Fan and Heating
modes for approximately 20 minutes and then stops
automatically.
• Recommended to open the windows during this
operation.
TO SET DAILY TIMER
• To turn ON or OFF the unit at a preset time.
SELECT
Select ON or
Set the time. Confi rm.
OFF timer.
• To cancel ON or OFF timer, press
CANCEL
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control preparation.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually, you can restore the
previous setting by pressing
SET
.
• If the main power is switched off for an hour or more,
the clock and timer will need to be set again.
OPTIONAL SETTINGS
• To avoid unintentional operation, you can
assign a different address to each indoor
unit.
• Press repeatedly to select your desired
address setting.
Address 1 Address 2Group Address 3
ADDRESS
• By default, ADDRESS 1 is selected. You
do not need to change this setting for
normal operation.
• If the address is set to GROUP, more
than one indoor unit can be operated at
the same time.
Press to restore the remote control’s default
RESET
setting.
Not used in normal operations.
SET
HINTS
• Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
TIMER
ENGLISH
SET
.
5
S
PRODUCT OVERVIEW & OPERATIONS
PRODUCT OVERVIEW & OPERATIONS
(WIRED REMOTE CONTROL)
(WIRED REMOTE CONTROL)
Horizontal airfl ow direction louver
Vertical airfl ow
direction louver
FAN SPEED
OFF
SET
CANCEL
ECONOMY
/
ON
SPEED
AUTO
AIR SWING
AUTO 123
FAN
AUTO
AIR SWING
MANUAL
MON TUE WED THU FRI SAT SUN
ON
CZ-RD513C
TIMER/CLOCK
MODE
UP
SELECT
DOWN
CHECK ODOUR WASH VENTILATION TEST RUN FILTER RESET
CZ-RD513C
• For normal operation, the
buttons are not in use.
VENTILATION
Remote Control Preparation
1
2
3
4
ELECT
Press
Press to set day
Confi rm
Repeat steps 2 and 3 to set the
current time.
MODE
AUTO
TEMP/
A/C No.
DOWN
and
UP
TEST RUN
Intake grille
Air fi lter
/
ON
OFF
UP
DOWN
TO TURN ON OR OFF THE UNIT
TO SET TEMPERATURE
• Selection range: 16°C ~ 31°C.
3
2
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode according to temperature
setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
1
(Applicable for Inverter / Heat-pump Model)
FAN mode - To enables air circulation in the room
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
• During soft dry operation, the indoor fan operates at a
low fan speed.
• The louvers movement might not align with the remote
control display.
6
TO SET DAILY TIMER
FAN
MANUAL
HINTS
TO SELECT FAN SPEED (3 OPTIONS)
SPEED
LO MEDAUTO HI
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If the operation mode is set to Fan, the fan speed will
be fi xed at MED regardless of the temperature setting.
AUTO
MANUAL
AIR SWING
TO ADJUST AIRFLOW
DIRECTION
• Keeps the room ventilated.
AUTO
• Auto Air Swing function optimize room comfort by
giving fi ner control over the airfl ow direction.
• The vertical airfl ow louver swings up and down
automatically.
• Do not adjust the vertical airfl ow direction louvers by
hand.
• Horizontal airfl ow direction louver is
manually adjustable.
• There are 4 options for manual vertical airfl ow
direction.
• The airfl ow direction can be adjusted as desired by
using remote control.
ECONOMY
TO REDUCE POWER CONSUMPTION
• Recommend to use when desired room temperature is
reached.
• Economy operation can be activated in all modes and
can be cancelled by pressing the respective button
again.
ODOUR WASH
ODOUR REMOVING
• Applicable for all models.
• Helps to remove unpleasant odour from the
surrounding area during operation.
• To enable the odour removing function, press the
once.
ODOUR WASH
• To cancel, press the respective button again.
ODOUR CLEAR
• Applicable for Inverter model only.
• To remove odour and minimize the growth of odour
causing moulds in the air conditioner’s interior section.
• To enable this function, press the
3 seconds.
ODOUR WASH
• The unit will automatically perform Fan and Heating
modes for approximately 20 minutes and then stops
automatically.
• Recommended to open the windows during this
operation.
for more than
TO SET DAILY TIMER
• To turn ON or OFF the unit at a preset time.
12
MODE
SELECT
Enter daily timer mode. Select ON or OFF timer.
34
UP
DOWN
SET
Set the time. Confi rm.
• To cancel ON or OFF timer, press
CANCEL
.
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control preparation.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually, you can restore the
previous setting by pressing
SET
.
• If the main power is switched off for an hour or more,
the clock and timer will need to be set again.
HINTS
• Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
ENGLISH
7
CHECK ODOUR WASH VE
MODE
SELECT
SET
CANCEL
OFF
/
O
TIMER/CLOCK
ECONOMY
UP
DOWN
CZ-RD513C
TIMER/CLOCK
TIMER/CLOCK
TO SET WEEKLY TIMER
OPERATION DETAILS
TO SET WEEKLY TIMER
MONTUE WED THU FRI SAT SUN
ON
OFF
CZ-RD513C
TIMER/CLOCK
UP
MODE
SET
DOWN
SELECT
CANCEL
ECONOMY
CHECK ODOUR WASH VENTILATION TEST RUN FILTER RESET
Will light up if Timer
operation is selected
FAN SPEED
AUTO
AUTO
AIR SWING
AUTO 123
/
ON
TEMP/
A/C No.
FAN
UP
MODE
SPEED
DOWN
MANUAL
AUTO
AIR SWING
6 different programs can
be set in a day (1 ~ 6)
OPERATION DETAILS
• Weekly timer is only applicable for wired remote
control, press
MODE
for 3 seconds to select daily
timer or weekly timer.
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to
6 timers in any given day.
• Same timer program cannot be set on the same day.
Check Timer
1. Enter timer mode.
MODE
SELECT
UP
DOWN
SET
CANCEL
2. Select the day.
8
TIMER
MON TUE WED THU FRI SAT SUN
ON
OFF
1
23456
Indicate the
selected day
Time to be
selected (Interval
10 minutes)
OFF-Timer. To automatically
switch “OFF” the unit.
ON-Timer. To automatically switch “ON” the unit.
Day to be selected
Change Display
MODE
1. Press
for 3 seconds to change the display to
weekly timer.
Select days to run timer
SELECT
2. Press
3. Press
The selected day will be highlighted with .
Press
to enter day setting.
to select your desired day.
SET
to deselect or select mark.
Repeat this step includes other day.
Select ON/OFF Timer
SELECT
4. Press
5. Press
6. Press
to enter Timer 1.
to choose ON or OFF.
SET
to confi rm the selection.
Select Timer
7. Press
8. Press
• Repeat steps 5 to 8 to set Timer 2 to 6, or press
to select your desired time.
If you want to set together with your desired
temperature, press
SET
to confi rm the setting.
UP
DOWN
to select the temperature.
to cancel the related timers.
CANCEL
3. The display will show the program for each of the
selected day.
Modify Or Add Timer
• Perform check timer operation to select the day.
Repeat steps 4 to 8 to modify existing timer program,
or add any new timer program.
Cancel Timer
• Perform the step below to cancel the timer program
for a particular day.
1. Enter timer mode.
MODE
SELECT
UP
DOWN
SET
CANCEL
2. Select the day.
3. Press to enter day
4. Press to cancel the
Disable Weekly Timer
• To disable weekly timer setting, press
CANCEL
press
.
Enable Weekly Timer
• To enable previous weekly timer setting, press
then press
SET
.
setting.
timer set.
MODE
, then
MODE
,
CARE & CLEANING CARE & CLEANING
WASHING INSTRUCTIONS
HINTS
2
Remove the main air fi lters from the intake grille tabs.
1
Push the knobs in the intake grille in the direction
of the arrow to open the intake grille.
Push
3
Press the side air fi lter tab
Push
Push
INDOOR UNIT
• Switch off the power supply before cleaning.
CAUTION
WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• Do not touch the aluminium fi n, sharp parts may cause injury.
HINTS
• Clean the fi lter regularly for best performance and to
reduce power consumption.
• Please consult your nearest dealer for seasonal
inspection.
ENGLISH
Remove Air Filter
1
Push the knobs in the intake grille in the direction
of the arrow to open the intake grille.
Push
Knob Intake Grille
2
Remove the main air fi lters from the intake grille tabs.
AIR FILTERS
Vacuum, wash
and dry.
Tabs
3
Press the side air fi lter tab 1 and
Main air fi lter
and 2 in that order to release the side air fi lter.
in that order to release the side air fi lter.
Air Filter Installation
Knob
Push
1. Install the air fi lters to the intake grille by the
reverse procedures of removal.
2. Close and push the knobs to secure the
intake grille.
INDOOR UNIT
Wipe the unit gently with a
soft, dry cloth.
Side air fi lter
Push
2
1
2
Push
1
Close
Air Filter Maintenance
Cleaning is needed when:
FAN SPEED
AUTO FAN
AUTO
AIR SWING
AUTO 123
POWER
TIMER
FILTER
ECONOMY
ODOUR WASH
COOL DRY
FILTER
“FILTER RESET” appears on
RESET
the remote control display.
(For wired remote control)
“FILTER” lights up on the
indicator display.
(For wireless remote control)
AUTO
• lt is recommended to clean the air fi lter every 6
weeks.
• After the air fi lter is cleaned, press
reset.
• Do not operate without an air fi lter.
• Wash/rinse the air fi lter gently with water to avoid
damage to the air fi lter surface.
• Do not dry the part with a hair dryer or a stove.
• Replace any damaged air fi lter.
FILTER RESET
FILTER RESET
/
to
9
TROUBLESHOOTING TROUBLESHOOTING
Symptom
Cause
The following symptoms do not indicate malfunction.
The following symptoms do not indicate malfunction.
Symptom
Mist emerges from indoor unit. • Condensation effect due to cooling process.
Water fl owing sound during operation. • Refrigerant fl ow inside the unit.
The room has a peculiar odour. • This may due to damp smell emitted by the wall, carpet, furniture or
Indoor fan stops occasionally during automatic
fan speed setting.
Operation is delayed a few minutes after
restart.
Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes.
Timer indicator is always on. • The timer setting repeats daily once set.
Indoor fan stops occasionally during heating
operation.
Cracking sound can be heard during
operation.
Unit switch to FAN operation and air become
humid.
Outdoor unit emits noise during heating
operation.
Operation does not stop immediately after
pressed the OFF/ON button.
Operation stops occasionally. (“DEFROST”
appears on the remote control display)
Airfl ow does not start immediately after
operation is started. (“PRE HEAT” appears on
the remote control display)
Operation starts after power resumes. • Auto restart is in function and operates under previous setting.
During dry mode, cold air blow out.
Fan speed change occasionally during heating
mode.
Outdoor unit emits steam during heating
mode.
Air Swing operation 1, 2, 3 are no variance
in angle.
Cause
clothing.
• This helps to remove the surrounding odours.
• The delay is a protection to the unit’s compressor.
• To avoid unintended cooling effect.
• Changes of temperature cause the expansion/contraction of the unit.
• This happens when the room temperature reaches the set temperature,
operation switches to FAN mode and the humidity increase.
• This is due to changes infl ow of refrigerant gas when operation stops
and starts.
• Discharging heat is in process. Operation will stops automatically after
approximately 60 seconds.
• The unit is in defrosting mode, and the melted frost is drained from the
outdoor unit.
• The unit is warming up to provide warm air.
• The unit is running cooling operation with low fan speed to dehumidify
the room.
• The room temperature has reached the remote control setting. When the
room temperature drops again, the fan speed will resume to the remote
control settings.
• This is due to defrost operation happens at the heat exchanger.
• Only one blowing angle is available for Ceiling model.
10
Symptom
Check
Check the following before calling for servicing.
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
NON SERVICEABLE CRITERIAS
FOR EXTENDED NON-USE
“ “CHECK”
Display on Wired Remote Control.
Check the following before calling for servicing.
Symptom
Heating/Cooling operation is not working
effi ciently.
Heating mode cannot be operated. • The unit is forced to operate at cooling mode only in a non-living room,
Noisy during operation. • Check if the unit has been installed at an incline or the intake grille is not
Remote control does not work.
(Wireless remote control display is dim or
transmission signal is weak.)
The unit does not work. • Check if the circuit breaker is tripped.
The unit does not receive the signal from the
remote control.
CHECK”
Display on Wired Remote Control.
Check
• Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the fi lters.
• Clear any obstruction at the air inlet and air outlet vents.
such as a computer room.
closed properly.
• Insert the batteries correctly.
• Replace weak batteries.
• Check if timers have been set.
• Make sure the receiver not obstructed.
• Make sure the address is set correctly.
• Make sure the remote control signal transmission is within the range.
• Certain fl uorescent lights may interfere with signal transmitter. Please
consult your nearest dealer.
ENGLISH
If the CHECK indicator fl ashes on the wired
remote control.
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
• Checking of remote control batteries (wireless remote
control).
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
Cooling: ≥ 8°C Heating: ≥ 14°C
FOR EXTENDED NON-USE
• Activate heat mode (Inverter/Heat-pump model) or Fan
mode (Cooling model) for 2~3 hours to remove moisture
left in the internal parts thoroughly.
• Turn off the power supply.
• Remove the remote control batteries (wireless remote
control).
• Turn off the unit.
• Turn on again after 3 minutes.
• If CHECK continues to blink, press
persist, please consult your nearest authorized dealer.
for error messages. If problem
CHECK
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then CALL Authorized
Distributor under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
• The odour persists even after odour wash operation is
used continuously.
11
QUICK GUIDE/GUÍA RÁPIDA/GUIDA RAPIDA/
ADDRESS
AUTOAUTO
TIMER
ON
SETRESET ADDRESS
MODE
MODE
AIR SWING
FAN SPEED
AIR SWING
TIMER
OFF/ON
SET
CANCEL
SELECT
CLOCK
FAN SPEED
FILTER RESET
MANUAL
ODOUR WASH
MODE
AUTO
ECONOMY
WIRELESS REMOTE CONTROL
CONTROL REMOTO INALÁMBRICO
TELECOMANDO WIRELESS O SENZA FILI
INFRAROT-FERNBEDIENUNG
CONTROLO REMOTO SEM FIO
DRAADLOZE AFSTANDSBEDIENING
WIRED REMOTE CONTROL
CONTROL REMOTO CON CABLES
TELECOMANDO CABLATO
KABELFERNBEDIENUNG
CONTROLO REMOTO COM FIOS
BEDRADE AFSTANDSBEDIENING
QUICK GUIDE/GUÍA RÁPIDA/GUIDA RAPIDA/
KURZANLEITUNG/GUIA RÁPIDO/SNELLE GIDS
KURZANLEITUNG/GUIA RÁPIDO/SNELLE GIDS
WIRELESS REMOTE CONTROL • •
INFRAROT-FERNBEDIENUNG • •
CONTROL REMOTO INALÁMBRICO • •
CONTROLO REMOTO SEM FIO • •
DRAADLOZE AFSTANDSBEDIENING
TELECOMANDO WIRELESS O SENZA FILI • •
WIRED REMOTE CONTROL • •
KABELFERNBEDIENUNG • •
MON TUE WED THU FRI SAT SUN
ON
CZ-RD513C
TIMER/CLOCK
UP
F566080
MODE
SELECT
CHECK ODOUR WASH VENTILATION TEST RUN FILTER RESET
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
DOWN
SET
CANCEL
ECONOMY
CONTROL REMOTO CON CABLES • •
CONTROLO REMOTO COM FIOS • •
FAN SPEED
AUTO
AUTO
AIR SWING
AUTO 123
/
ON
OFF
FAN
MODE
SPEED
MANUAL
AUTO
AIR SWING
1
MODE
Inverter/Heat-pump
model
AUTO HEAT
DRY
COOL
FAN
Cooling model
Select the desired mode.
Seleccione el modo deseado.
Selezionare la modalità desiderata.
Wählen Sie die gewünschte Betriebsart aus.
Seleccione o modo de funcionamento pretendido.
Selecteer de gewenste stand.
AUTO FAN
DRY COOL
2
OFF/ON
3
Start/stop the operation.
Inicie/detenga el funcionamiento.
Avviare/arrestare l’apparecchio.
Schalten Sie das Gerät ein bzw. aus.
Ligue/Desligue a unidade.
Start/stop het apparaat.
Select the desired temperature.
Seleccione la temperature deseada.
Selezionare la temperatura desiderata.
Stellen Sie die gewünschte T emperatur ein.
Programe a temperatura desejada.
Stel de gewenste temperatuur in.
TELECOMANDO CABLATO • •
BEDRADE AFSTANDSBEDIENING
1
/
ON
OFF
2
TEMP/
A/C No.
UP
DOWN
3
Panasonic Corporation
Website: http://panasonic.net/
MODE
Inverter/Heat-pump
model
AUTO HEAT
DRY
COOL
FAN
Cooling model
AUTO FAN
DRY COOL
UP
DOWN
Start/stop the operation.
Inicie/detenga el funcionamiento.
Avviare/arrestare l’apparecchio.
Schalten Sie das Gerät ein bzw. aus.
Ligue/Desligue a unidade.
Start/stop het apparaat.
Select the desired mode.
Seleccione el modo deseado.
Selezionare la modalità desiderata.
Wählen Sie die gewünschte Betriebsart
aus.
Seleccione o modo de funcionamento
pretendido.
Selecteer de gewenste stand.
Select the desired temperature.
Seleccione la temperature deseada.
Selezionare la temperatura desiderata.
Stellen Sie die gewünschte T emperatur ein.
Programe a temperatura desejada.
Stel de gewenste temperatuur in.
Printed in Malaysia
OSTH0806-02
Loading...