Panasonic CT20SX11E - 20"" COLOR TV, CT-F2111, CT-F2111X, CT-F2121L Operating Instructions Manual
Color Television
Operating Instructions
®
CT-20SX11
CT-F2111
CT-F2111X
CT-F2121L
For assistance, please call: 1-800-211-PANA (7262) or
send e-mail to: consumerproducts@panasonic.com (USA only)
TQB2AA0407 10607
PRINTED IN USA
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WA RNI N G: To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING: To prevent fire or shock hazard, do not expose this appliance
The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
to rain or moisture.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are i n
the papers with the appliance.
1
T
ABLE OF CONTENTS
T able of Contents
Feature Chart ............................................................3
Congratulations........................................................4
Customer Record ........................ ....... ...... ....... ...... ...... .............4
Care and Cleaning ...................................................................4
Specifications ...........................................................................4
Installation.................................................................5
Television Location...................................................................5
Optional Cable Connections.....................................................6
AC Power Supply Cord ............................................................6
Cable / Antenna Connection ....................................................6
Optional Equipment Connections...........................7
VCR Connection.......................................................................7
Cable Box Connection..............................................................8
VCR and Cable Box Connection..............................................9
Amplifier Connection (To Audio Amp) ...................................10
Main Menu...............................................................11
Action Button..........................................................................11
CH / VOL Button.....................................................................11
Remote Control Buttons.........................................................11
Remote Control Guide............................................................11
Main Menu Feature Chart.......................................12
Special Features.....................................................14
Menu Languages....................................................................14
Timer......................................................................................14
Sleep Timer..................................................... ...... ...... ....... ....14
Program Timer .......................................................................14
CH CAP (Channel Caption)....................................................15
Lock ......................... ....................................... .......................16
Troubleshooting Chart...........................................17
Read these instructions completely before operating TV.
Contents are subject to change without notice or obligation.
Copyright 2001 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.
2
Feature Chart
MODELS
F
EATURE CHART
SPECIAL
FEATURES
FEATURES
MENU LANGUAGE
ENG/SPAN/FR
V-CHIP CAPABILITY
75 OHM INPUT
VIDEO NORM
AUDIO NORM
STEREO
AI SOUND
BASS/BALANCE/TREBLE
SURROUND
A/V IN
(REAR/FRONT)
AUDIO OUT
CT -20SX11
r r r r
r r r r
r r r r
r r r r
r r r r
r r r r
r r r r
r r r r
r r r r
2
(2/1)2 (2/1)2 (2/1)2 (2/1)
r r r r
CT -F2111
CT-F2111X
CT-F2121L
A/V JACKS AUDIO
S-VHS INPUT
HEADPHONE JACK
r r r r
r r r r
3
C
ONGRATULATIONS
Congratulations
Your new Panasonic Tau television is designed to provide state-of-the-art picture
quality and features an innovative PureFlat
cabinet with compact, elegant styling is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are loc ated on the back of the TV. You
should note the model and serial number in the space provided and retain as a
permanent record of your purchase. This will aid in identification in the event of theft or
loss. Product registraton for U.S. customers is available at: www.prodreg.com/
panasonic.
Care and Cleaning
Screen (Turn TV Off)
r Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE
r Avoid excessive moisture and wipe dry.
Note: Do not spray any type of cleaning fluid directly on the screen.
Model
Number
Serial
Number
ABRASIVE CLEANERS.
TM
picture tube. The new gray or silver
Cabinet and Remote Control
r For cabinets and remote control, use a soft cloth dampened with water or a mild detergent
solution. Avoid excessive moisture and wipe dry.
r Do not use benzene, thinner or other petroleum based products.
Specifications
Power Source
CT-20SX11 (1.4A)
CT-F2111 (1.4A)
CT-F2111X (1.4A)
CT-F2121L (1.4A)
Channel Capability - 181 VHF-12; UHF-56; Cable-113
Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks 500mV RMS 47K Ohm
Audio Output Jacks 0-2.0V RMS 4.7K Ohm
S-Video Input Jacks S-Video (Y-C) Connector
Specifications are subject to change without notice or obligation.
Auto (110Vca-220Vca), 50/60Hz
120V AC, 60Hz
127V AC, 60Hz
4
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center.
Consult your dealer for available options.
r Avoid excessive sunlight or bright lights, including reflections.
r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
r Fluorescent lighting may reduce remote control transmitting range.
r Keep away from magnetic equipment, including motors, fans and external sp eakers.
CAUTION: Use this television receiver only with the cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the apparatus. When
a cart is used, use c aution when moving the cart/apparatus combination to av oi d
injury from tip-over. In order to avoid injury to children, never place your
television receiver on a piece of furniture that is capable of being tilted by a child
leaning on it, pulling on it, standing on it, or climbing on it.
component failure.
I
NSTALLATION
5
I
NSTALLATION
Optional Cable Connections
Shielded audio and video cables should be used between components. For best
results:
r Use 75-ohm coaxial shielded cables.
r Use appropriate input and output connectors, that match your component connectors.
r Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. D O NOT USE A PL UG WITH A RECE P TACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,
CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
Polarized plug
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming Cable from
Cable Company
Connect the cable supplied by your local cable company.
Note: A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Antenna Connections
r For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended.
r Antenna Mode must be set to TV.
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna
Cable Preset
Cable Mode is preset at the factory. Antenna
users must change to Antenna Mode in the
Setup Menu.
6
Optional Equipment Connections
IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES,
COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.
The extended use of fixed image program material can cause a permanent “shadow image” on
the picture tube. This background image is viewable on normal programs in the form of a
stationary fixed image. This type of irreversible picture tube deterioration can be limited by
observin g the followin g steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Note: The marking or retained image on the picture tube resulting from fixed image
use is not an operating defect and as such is not covered by Warranty. This
product is not designed to display fixed image patterns for extended periods
of time.
VCR Connection
VCRs, video disc pl ayers, video game equipmen t, and DSS equipment can also b e
connected to the video inputs. See the optional equipment manual for more
information.
CONNECTIONS ON BACK OF TV
VCR
I
NSTALLATION
ANT
S-VIDEO
Use either the
S- VI D E O or V id eo
connection.
CABLES NOT SUPPLIED
Procedure
TO AUDIO
AMP
INPUT
AUDIO
RL
VIDEO
2
1
Jack used for 1/8"
headpone plug
VIDEO OUT
L
AUDIO OUT
R
ANT IN
ANT OUT
HPJ
VIDEO L AUDIO R
TERMINALS ON FRONT OF TV
1. Connect equipment as shown to front or rear Audio/Video input jacks.
Note: Front and rear Audio/Video connections (INPUT 2) cannot be operated at the
same time.
2. Select the Video mode by pressing T V/VIDEO button.
3. Operate optional equipment as instructed in equipment manual.
t
INPUT 2
7
I
NSTALLATION
Cable Box Connection
Follow this diagram when connecting your television to a cable box only.
CONNECTIONS ON BACK OF TV
CABLE BOX
INCOMING
CABLE
ANT IN
ANT OUT
ANT
S-VIDEO
CABLES NOT SUPPLIED
TO AUDIO
AMP
INPUT
AUDIO
RL
VIDEO
2
1
Note: The remote control must be programmed with supplied codes to operate the cable
box. See Programming the Remote Control in the Remote Control Quick Reference
Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. T une th e telev ision to Channe l 3 or 4 dep ending on the R F out set tin g of the ca ble box .
2. Using the cable box, tune to the premium cable channel you want to view.
8
I
NSTALLATION
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
ANT
CONNECTIONS ON BACK OF TV
TO AUDIO
INPUT
S-VIDEO
Use either the
S- VI D E O or V id eo
connection.
CABLES NOT SUPPLIED
AMP
2
1
AUDIO
RL
VIDEO
VCR
VIDEO OUT
AUDIO OUT
ANT OUT
L
R
ANT IN
CABLE BOX
ANT OUT
ANT IN
Incoming
cable
Note: The remote control must be programmed with supplied codes to operate the VCR and
cable box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Tune the television to CH 3 or CH 4 depending on the Cable box RF out.
2. Using the cable box, tune to the premium cable channel you want to view.
Recording a premium (scrambled) cable channel
Procedure
1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
2. Turn the VCR ON.
3. Tune the VCR to Channel 3 or 4, depending on your VCR.
4. Using your cable box, tune to the premium cable channel you want to record.
5. Begin recording.
9
I
NSTALLATION
Amplifier Connection (To Audio Amp)
Connect to an external audio amplifier input for listening to a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON from AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier.
CONNECTIONS ON BACK OF TV
External Amplifier
CABLES NOT SUPPLIED
ANT
S-VIDEO
TO AUDIO
AMP
INPUT
AUDIO
RL
VIDEO
2
1
10
Main Menu
ACTION Button
M
AIN MENU
Main Menu
EXIT
Press the ACTION button to display the Main Menu and submenus. Press the ACTION button
repeatedly to exit.
CH / VOL Buttons
Press the CH (channel) or VOL (volume) buttons to select an icon. Use the CH buttons to
highlight the desired features. Use VOL buttons to select and adjust features.
Remote Control Buttons
Remote Control Guide
The Re mote Control Quick Reference Guide is located within the package provided
with this TV.
Remote ACTION / Navigation Button
CH
VOLVOL
CH
11
Loading...