Panasonic CF-T2 User Manual

Personal Computer

Reference Manual

Model No. CF-T2 Series

We recommend that this Reference Manual be printed.

Read Me First

z Some of the illustrations in this manual may differ slightly in shape from the actual items in

order to make the explanation easier to understand.

z If the user has logged on without the administrator authority, some functions may not be

executable, and some screens may not be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.

z Confirm the latest information on optional products in catalogs, etc.

Illustrations and Terminology in this Reference Manual

NOTE NOTE provides a useful fact or helpful information.

CAUTION CAUTION indicates a condition that may result in minor

or moderate injury.

Enter Fn+F5

[start] - [Run] This illustration means to click [start], then to click [Run].

Î or ⇒ These symbols indicated related pages.

Orange

This illustration means to press the [Enter] key.

This illustration means to press and hold the [Fn] key, then press the [F5] key. When using with the [Fn] and [Ctrl] functions interchanged, read with [Fn] and [Ctrl] reversed.

For some applications, you may need to double-click.

Î : Refer to the page in this Reference Manual

⇒ : Refer to the Operating Instructions

If *1 is selected, it will jump to a related explanatory note.

Read Me First

About Display Mode

Internal LCD (Notebook) This computer's display

External Display (PC monitor) External display connected to this computer

Simultaneous display (Intel(R) Dual Display Clone)

Extended Desktop To use both the internal LCD and the external display as

The terminology in ( ) is the one used in [Intel(R) 82852/82855 GM/GME Graphics Controller properties]. To display [Intel(R) 82852/82855 GM/GME Graphics Controller properties]: Select [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics].

To display the same screen on both the LCD and external display

an extended display domain. You can drag a window between the internal LCD and the external display each other.

Key Combinations

CAUTION

z Do not press the following key combinations repeatedly in (quick) succession. Also, do

not press different key combinations quickly one after another.

z Do not press the following key combinations while using the touch pad (external

mouse), touchscreen or other keys.

NOTE

z Do not press the following key combinations until you log on to Windows and the hard

disk drive indicator turns off. Note, however, that the key combinations

Fn+F2

z The key combinations below may not work while some applications are running.

Besides, the popup window may not be displayed depending on the state of the application you are using (e.g., when [Command Prompt] is set to "Full Screen").

z When using with the

• Press

• It is not possible to replace the markings on the keys, or the keys themselves.

and Fn+F3 are operable in the Setup Utility.

Ctrl

instead of Fn.

and

Ctrl

functions interchanged. (Î page 82)

Fn+F1

Key Functions Popup Window

(Displayed after logging

on to Windows)

Fn+F1

Fn+F2

LCD brightness control (down)

LCD brightness control (up)

Pressing this key combination adjusts the brightness of LCD. The brightness setting is stored in memory separately under the condition the AC adaptor is connected and under the condition the AC adaptor is not connected.

Key Combinations

Key Functions Popup Window

(Displayed after logging

on to Windows)

Fn+F3

Display change

(When the external display is connected) By pressing this key combination, you can select either an external display, internal LCD or simultaneous. (Î page 61)

CAUTION

z Do not press another key until the display

destination has been completely switched.

z Do not press this key combination in the

following conditions.

• While MPEG files are playing.

• When the Extended Desktop is being utilized.

• When a game such as pinball is displayed.

NOTE

z This key combination does not work when

[Command Prompt] is set to "Full Screen".

z When switching to a different user with the

Fast User Switching function, this key operation may not work. In this case, log off all users and restart the computer.

Key Combinations

Key Functions Popup Window

(Displayed after logging

on to Windows)

Fn+F4

Speaker on/off switch

Pressing this key combination turns on/off audio from the internal speaker and headphone jack.

OFF (MUTE)

Fn+F5

Fn+F6

Fn+F7

NOTE

z Disabling the speakers will also disable the

warning beep.

z Speakers connected to the USB port

cannot be muted.

Volume control (down)

Volume control (up)

Pressing this key combination adjusts the volume of the internal speaker and headphone jack.

NOTE

z This key combination cannot be used to

adjust the volume of the warning beep or speakers connected to the USB port.

Shut down using the standby function

Pressing this key combination causes the current status of the computer to be saved to memory, and shuts down the computer. (Î page 23)

Key Combinations

Key Functions Popup Window

(Displayed after logging

on to Windows)

Fn+F9

Fn+F10

Fn+NumLk

Fn+Home

Remaining capacity of the battery pack

Shut down using the hibernation function

Pressing this key combination causes the current status of the computer to be saved to the hard disk, and shuts down the computer. (Î page 23)

The functions differ depending on the application software being used.

When the battery pack is inserted in the computer (example)

When the battery pack is not inserted in the computer

Key Combinations

Hotkey Settings

There are two Fn key functions as follows: z Fn key lock function

After

is pressed once, it stays in the "pressed" position until another key is pressed.

This is convenient when it is difficult to press two buttons simultaneously.

z Popup windows display ON/OFF

NOTE

z The Hotkey settings can be set separately for each user. z When using with the

and

Ctrl

reversed.

and

Ctrl

functions interchanged (Î page 82), read with Fn

1 Run the Hotkey Settings.

Select [start] - [All Programs] - [Panasonic] - [Hotkey Settings].

2 Set the parameters.

A. Use Fn key lock

Add the check mark if you want to enable the Fn key lock function. The following Fn key lock function will then be enabled. z To use

A Press B Press another key for combination. (Lock released)

z To use

A Press B Press another key for combination.

Fn key remains locked until

B. Notification

This setting is only available when [Use Fn key lock] is checked.

[Make sounds when Fn key is pressed]

Notifies the user with a sound when Fn is locked or released.

[Show status on screen]:

Displays the Fn key status on the taskbar.

only once:

once. (Locked)

successively:

twice. (Locked)

is locked is not locked

is pressed once more.

Key Combinations

C. Disable popup

Add the check mark if you want to turn the popup window display function OFF. "Full Screen" of [Command Prompt] or MPEG files may change to a window

display if display function OFF.

Fn+Fx*2 keys are pressed. To prevent this, turn the popup window

3 Select [OK].

If MUTE is set, you will not hear a beep.

"Fx" indicates any function key from F1 to

F10

LED Indicators

Power status z Not lit

Power off / Hibernation mode

z Green

Power on

z Blinking green

Standby mode

Battery pack status Î page 37

Caps Lock This indicator lights green when

pressed. Subsequent non-shifted input is capitalized.

NumLk (Numeric key)

This indicator lights green when pressed. When the green light is on, if pressed along with keys on certain other segments of the keyboard, then those keys will operate as numeric keys. The [Enter] key functions differently depending on the application.

Caps Lock

NumLk

is is

LED Indicators

ScrLk (Scroll lock)

Hard disk drive status This indicator lights when the hard disk drive is

SD memory card status This indicator lights when the SD memory card

This indicator lights green when Fn+ pressed. Scroll lock functions differently depending on the application.

accessed.

or MultiMedia card is accessed.

ScrLk

are

Touch Pad

Use the touch pad to move the cursor on the screen and perform computer operations.

A. Work Surface (touch pad) B. Left Button C. Right Button

Function Operation

Moving the Cursor

Move the tip of your finger lightly over the work surface.

Tapping/Clicking

tapping or clicking

Double-Tapping/DoubleClicking

double-tapping or double-clicking

Dragging

Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. or While holding down the button, moving your finger on the work surface.

Scroll Trace a circle around the touch pad. (Î page 13)

Touch Pad

NOTE

z Refer to [Mouse Properties] for information on basic operations other than the above.

To display [Mouse Properties]: Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].

z Sensitivity when touching the touch pad can be adjusted. (Î page 16) z When an external mouse is connected and the cursor does not operate properly:

In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you want to use the touch pad again, return the setting to [Enable]. (Î page 82)

Using the Touch Pad Utility

The Touch Pad utility enables you to scroll easily by tracing a circle around the touch pad.

NOTE

z Depending on the application software, the scroll operation may differ, or the scroll

function may not operate properly.

z When the external mouse driver is installed, the scroll function may not operate prop-

erly.

How to Scroll

1 Select the screen you want to scroll. 2 Position the cursor over the area you want to scroll. 3 Trace a circle around the edge of the touch pad as indicated in the

diagrams.

When you touch the scroll startup area on the touch pad, the icon on the taskbar will change to .

To scroll down (trace clockwise)

Touch Pad

To scroll up (trace counter-clockwise)

Scrolling will begin more easily if you start from the position marked by the and trace as indicated by the arrow. z On screens that cannot be scrolled (e.g., desktop screen), if you use the touch

pad as described in Step screen, causing the cursor to freeze. If this happens, remove your finger from the touch pad and begin again, this time starting from the center of the touch pad.

3 (Î page 13), the computer may try to scroll the

4 Once scrolling has begun, continue to trace a circle on the touch pad

without removing your finger from the pad.

z As long as you are tracing a circle, you can continue scrolling using any position

on the touch pad. It is not necessary to trace a circle around the edge of the pad.

z To scroll in the opposite direction, trace a circle in the opposite direction without

removing your finger from the touch pad.

5 When you finish scrolling, remove your finger from the touch pad.

Hints for Easier Touch Pad Operation

z You can change various touch pad settings using the following procedure:

[start] - [All Programs] - [Panasonic] - [Touch Pad utility settings] Settings can be changed for the following functions:

• Use Touch Pad function (On/Off)

• Display icon in task tray (On/Off)

• Animated icon in task tray (On/Off)

• Rotate icon when wheel is operated (On/Off)

• Scroll item under mouse cursor (On/Off)

• Scroll speed setting

• Set initial scroll scope

Touch Pad

Using the Virtual Scrolling Function

NOTE

z Because the Touch Pad utility and the Virtual Scrolling function both offer scrolling

functions that use the touch pad, these two features cannot be used simultaneously. If you try to use them at the same time, a message may be displayed asking you if you want to enable the Touch Pad utility.

• To use the Touch Pad utility: Select [Yes]. The Virtual Scrolling function will be disabled.

• To use the Virtual Scrolling function: Select [No], and then remove the Touch Pad utility and set the Virtual Scrolling function using the following procedure. In this case, the Touch Pad utility will be disabled.

1 Log on with the administrator authority.

Do not use the Fast User Switching function.

2 Select on the taskbar with the right button, and select [Exit].

If is not displayed on the taskbar: In [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings] - [General settings], add a check mark for [Display icon in task tray] and select [OK].

3 In [start] - [Control Panel] - [Add or Remove Programs], select

[TouchPadUtility], then select [Change/Remove].

4 At the confirmation message, select [OK], then select [Finish]. 5 Select at [Add or Remove Programs].

6 Select [start] - [Control Panel] - [Printers and Other Hardware] -

[Mouse] - [Device Settings].

7 Select the device name in [Devices] (e.g., Synaptics TouchPad), then

select [Settings].

Touch Pad

8 Select [Virtual Scrolling], add a check mark for the scroll functions

you want to use, then select [OK].

9 Select [OK] at [Mouse Properties].

NOTE

z To begin using the Touch Pad utility again:

A Log on with the administrator authority. B Run the setup program.

Select [start] - [Run], input [c:\util\touchpad\setup.exe], then select [OK].

C Select [Next] at the welcome message. D Select [Finish].

z At the confirmation message asking if you want to enable the Touch Pad utility, select

[Yes].

z When the setup is complete, will be displayed on the taskbar.

Adjusting the Sensitivity when Touching the Touch Pad

When operating the keyboard, if your hand touches the touch pad unintentionally causing the cursor to move, adjust the sensitivity using "PalmCheck™." When operating the touch pad, if your finger touches the touch pad unintentionally causing the cursor to move, or if the cursor does not move even when you move your finger above the touch pad, adjust the sensitivity using the "Touch sensitivity" setting. Adjust these two sensitivity settings until you find the setting that is easiest to use. Adjust [PalmCheck™] and [Touch Sensitivity] using the following procedure:

1 Select [start] - [Control Panel] - [Printers and Other Hardware] -

[Mouse] - [Device Settings].

2 Select the device name in [Devices] (e.g. Synaptics TouchPad), then

select [Settings].

3 Select [Sensitivity], then select [PalmCheck™] or [Touch Sensitivity].

After making the adjustment, select [OK].

Touch Pad

 PalmCheck™

z By dragging slide bar (A) to the [Maximum] position, you can prevent the cursor from

moving unintentionally.

z By dragging slide bar (A) to the [Minimum] position, you can enable the cursor to move

even with a light touch of the palm on the touch pad.

 Touch Sensitivity

z When slide bar (B) is dragged to the [Heavy Touch] position, the cursor will only move with

a strong touch on the touch pad.

z When slide bar (B) is dragged to the [Light Touch] position, the cursor will move even with

a light touch on the touch pad.

NOTE

z Click on [Defaults] to return the settings to their original positions at the time of

purchase.

Handling the Touch Pad

z By design the touch pad is to be used with a finger tip only. Do not place any object on the

work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens).

z Try to avoid having any harmful substances such as oil, come in contact with the touch

pad. The cursor may not work properly in such cases.

z When the touch pad becomes dirty:

Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene or thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

Touchscreen

Your computer is equipped with a touchscreen function allowing you to perform the same operations as the touch pad or mouse by touching the surface of the display with the stylus (included). The following explanation gives one example (for the default settings). The operation settings can be changed. (Î page 21)

Moving the cursor

Clicking (Tapping)

Functions Operation

The cursor is moved to the location pointed by the stylus.

One tap

Double-clicking (Double-tapping) Two quick taps

Dragging

Touch and hold the object (i.e. file or icon), move the stylus on the surface (dragging the object to the desired location), then release the stylus.

Touchscreen

 To right-click:

z Use on taskbar.

A Select on the taskbar.

changes to .

B Select the object you want to right-click.

changes to .

z If you make a mistake and select , select to return to .

z Use button selector.

A Right-click on on the taskbar, and select [Button selector].

The screen on the left will be displayed. Operation method is the same as on the taskbar (see above). z If you want to keep this screen visible at all times, select (A), and select to

add a check mark for [Always on top].

CAUTION

z When the internal LCD is used alone or with an external display simultaneously, the

touchscreen function cannot be used when the area of either display is set larger than default setting of the display resolution.

z If a change is made to the display resolution, or the cursor can not be pointed

correctly with the stylus, be sure to perform [Calibration]. (Î page 21)

z When mouse drivers are installed (e.g., Intellimouse), the touchscreen function may

not be used.

z When the operation of panning (only the internal LCD) is performed while the display

resolution is set higher than the resolution of the internal LCD, the touchscreen function will not work properly.

z Even when only an external display is in use, the cursor will move on the external

display if the surface of the internal LCD is touched when the touchscreen driver is active. Therefore, do not touch the internal LCD when only an external display is in use.

z The touchscreen function can not be used when using the “Full Screen” in [Command

Prompt].

z Do not select [Left-handed] in [start] - [Control Panel] - [Printers and Other Hardware]

- [Mouse] - [Buttons] - [Devices] - [Other Pointing Devices]. If [Left-handed] is

Touchscreen

selected, the operation when the touchscreen is tapped will change to "right-click."

Also, the touchscreen switching icon on the taskbar ( or ) will be reversed.

NOTE

z Select to view [Important Tips] for using the touchscreen. You can also view

[Important Tips] using the following procedures. Select [Important Tips] in [start] - [All Programs] - [Panasonic] - [On-Line Manuals].

Touchscreen

Configuring the Touchscreen

When needed, the touchscreen can be configured using the following steps.

1 Display [Mouse Properties] screen.

Double-click on the taskbar and then select [TouchScreen] or select [TouchScreen] in [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].

A. Double click settings

Set the width and height of the double click.

B. Advanced configuration

Set the advanced settings.

C. Test

Test for the "Double click settings".

D. Calibration & Test

Define the calibration setup. Use this procedure when the cursor, the stylus (included) touches do not appear to agree. (Necessary for changes in the alignment of the touchscreen with visual images or an adjustment of the display resolution.) Touch the "+" mark on the calibration screen for about one second. After the calibration procedure is executed (e.g., after the nine "+" marks are touched), the procedure ends when

Enter

is pressed.

2 Make necessary changes and select [OK].

NOTE

z The double-click speed of the touchscreen can be changed in [Buttons]. z For more information, click at the upper right corner.

Touchscreen

Handling the Touchscreen

z Use the stylus included with the computer. Do not use pencils, implements with sharp tips

or hard objects for screen operations. The screen may be damaged as a result.

z Do not place any object on the surface or press down forcefully with sharp-pointed objects

(e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens).

z Do not apply pressure to the perimeter of the display panel. The cursor may move to the

edge of the display.

z Do not operate the computer when such things as dust are on the screen. Do not allow

contact with substances that could dirty the touchscreen, such as oil.

z When the touchscreen becomes dirty:

• Wipe to remove dirt by using a dry soft cloth included with the computer.

• Do not use benzene or thinner, or rubbing alcohol.

• For more information, refer to "Suggestions About Cleaning the LCD Surface" that comes with the soft cloth.

Handling the Stylus

z Clean the stylus tip and screen prior to operation. Foreign particles can scratch the screen

and impede the operation of the stylus.

z Use the stylus only for the computer screen.

Using it for any other purpose may damage the stylus and scratch the screen.

Standby/Hibernation Functions

Starting Up Your Computer Quickly

If you use the standby or hibernation function, you can shut down the computer without closing programs and documents. Upon restarting your computer from either the standby or hibernation mode, you can immediately continue working in all programs, or documents that were open at the time the computer was placed into standby or hibernation mode.

Differences between the Standby and Hibernation Functions

Function Where data is

saved to

Standby function

Hibernation function

Memory Short Yes

Hard disk Rather long Power is not required to maintain data

Time until resume

Requires power supply

(if power is cut, all data is lost)

NOTE

z We recommend plugging in the AC adaptor if the standby function is to be used for a

long period of time. If the AC adaptor cannot be connected, we recommend that hibernation mode be used instead of the standby mode.

z If the standby or hibernation function is used repeatedly, the computer may not work

properly. To stabilize computer operations, shut down Windows on a regular basis (about once a week) without using the standby or hibernation function.

Entering the Standby or Hibernation Mode

Use any of the following methods to enter the standby or hibernation mode. To use the hibernation mode, set [Power Options] in advance (Î page 24). (Enabled in factory preset.)

z Using Fn key combinations (Î page 6) z Using the power switch (Î page 25) z Using the display (Î page 26)

Standby/Hibernation Functions

z From the shutdown screen

• Standby In [start] - [Turn Off Computer], select [Stand By].

• Hibernation In [start] - [Turn Off Computer], press and hold

Setting for Using the Hibernation Mode

At the time of purchase, the computer is set so that hibernation mode can be used.

1 Select [start] - [Control Panel] - [Performance and Maintenance] -

[Power Options].

2 In [Hibernate], add the check mark for [Enable hibernation] and select

[OK].

Precautions

Shift

, then select [Hibernate].

 Before entering the standby or hibernation mode

z Be sure to save all data. z When a file in an external device such as a CD drive, external hard disk, or ATA card is

opened, close the file.

z Even when a password has been set in the Setup Utility, [Enter Password] does not

appear when the computer resumes from the standby or hibernation mode. If you want to use the security function when using the standby or hibernation mode, use the Windows password as follows:

A Select the account to change in [start] - [Control Panel] - [User Accounts]. B Set the password. C Add the check mark for [Prompt for password when computer resumes from

standby] in [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced].

z Do not enter either the standby or hibernation mode under the following conditions. You

may corrupt your data or file, the standby or hibernation function may not work, or the computer (or peripherals) may fail to work properly.

• While the hard disk drive indicator or SD memory card indicator is on.

Standby/Hibernation Functions

• When playing/recording audio files and displaying images (such as MPEG files).

• When using communications software or the network function.

• When using peripheral devices. If these devices fail to work properly, restart the computer.

z After resuming from hibernation mode or standby mode, the computer may not work

properly, or may not be able to connect to the network.

 When entering the standby or hibernation mode

Standby mode: until the power indicator blinks green Hibernation mode: until the power indicator goes off z Avoid the following:

• Touching the keyboard, touch pad, touchscreen, or power switch.

• Using external mouse or other peripheral devices.

• Connecting or disconnecting the AC adaptor.

• Closing or opening the display.

z It may take one or two minutes to enter standby or hibernation mode.

 In standby or hibernation mode

z Do not insert or remove peripherals; abnormal operation may result. z In standby mode, power is consumed. If PC Cards are inserted, more of that power is

Using the Power Switch

 Setting

consumed. When all power has been consumed, all data saved at standby is lost since it is retained in memory. We therefore recommend plugging in the AC adaptor when using the standby function.

1 Select [start] - [Control Panel] - [Performance and Maintenance] -

[Power Options] - [Advanced].

2 Select [Stand by] or [Hibernate] for [When I press the power button

on my computer], and then select [OK].

Standby/Hibernation Functions

 Entering the standby or hibernation mode

Using the Display

1 Slide the power switch (A); at the beep

The computer will enter either the standby or hibernation mode, depending on the setting.

sound, release your finger.

CAUTION

z After releasing your finger from the power switch, do not touch the power switch until

the power indicator goes off or blinks.

z At the beep

slide the power switch and hold it for more than four seconds, the computer will emit a

second beep Even when [When I press the power button on my computer] is set to [Shut down] with [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] [Advanced], if you slide the power switch for more than four seconds and do not

release it, a second beep not previously saved will be lost.

When the speaker function is disabled, e.g., by the key combination Fn+F4, there will be no beep sound.

sound, release your finger from the power switch. If you continue to

then power off. Data not previously saved will be lost.

will sound and the power will be turned off forcibly. Data

 Setting

1 Select [start] - [Control Panel] - [Performance and Maintenance] -

[Power Options] - [Advanced].

2 Select [Stand by] or [Hibernate] for [When I close the lid of my

portable computer], and then select [OK].

 Entering the standby or hibernation mode

1 Close the display.

Standby/Hibernation Functions

The computer will enter either the standby or hibernation mode, depending on the setting. z When entering the standby or hibernation mode, close the display correctly. If

you do not do so, (for example, if you open the display soon after you close it) the computer may not enter standby or hibernation mode.

Resuming Operation

CAUTION

z Until resuming is complete (requires about 15 seconds, or 60 seconds if connected to

a network, after the display returns), avoid the following:

• Touching the keyboard (except for password input), touch pad, touchscreen, or

power switch.

• Using external mouse or other peripheral devices.

• Connecting or disconnecting the AC adaptor.

• Closing or opening the display.

• Shutting down or restarting Windows.

• Entering either the standby or hibernation mode again.

Using the Power Switch

1 Slide the power switch (A).

Standby/Hibernation Functions

Using the Display

When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid of my portable computer] (Î page 26), you can resume operation using the following procedure.

1 Open the display.

Even if the display is closed after the computer has entered either the standby or hibernation mode, operation will resume when the display is opened. If the computer does not resume when the display is opened, slide the power switch.

Security Measures

To prevent unauthorized access of your computer, the various security measures are provided below.

Situation Function to use

You do not want the settings in the Setup Utility to be changed

You do not want your computer to be used without permission

You do not want the data on the hard disk to be read, or data to be written to the hard disk, in cases including theft

You want to prevent theft of your computer Security lock (⇒ Operating Instructions

You need to set the Supervisor Password beforehand.

NOTE

z Supervisor Password (See below) z User Password (Î page 31) z SD Memory Card Security Function

(Î page 55)

z Password on boot (Î page 32)

z Hard Disk Lock (Î page 33)

"Names and Functions of Parts")

z Windows has a security function that differs from the above security measures. For

detailed information, refer to the Windows help.

z For security functions for the wireless LAN:Î page 76

Setting the Supervisor Password (enabling, changing, disabling)

1 Run the Setup Utility. (Î page 79) 2 Using either Î or Í, select [Security]. 3 Using either Ï or Ð, select [Set Supervisor Password] and press

Enter

Security Measures

4 Only when the Supervisor Password has been set:

Enter your password at [Enter Current Password] and press

Enter

5 Enter your password at [Enter New Password] and press

z To disable the Supervisor Password

Press only

Enter

6 Re-enter your password at [Confirm New Password] and press

Enter

z To disable the Supervisor Password

7 At [Setup Notice], press

8 Press

CAUTION

z Do not forget your password. If your Supervisor Password is forgotten, you will be

unable to use your computer. Contact your technical support office.

z When running the Setup Utility, do not leave your computer even for a short time, as

the possibility exists for the password to be set/changed by another person.

NOTE

z Your password will not be displayed on the screen. z Only up to seven alphanumeric characters can be used.

• There is no distinction between upper and lower case letters.

• Use only the upper horizontal row of numeric keys to input your password.

• Do not input your password while holding down on

z Disabling the Supervisor Password also disables the User Password.

Press only

F10

and select [Yes], then press

Enter

Shift

Ctrl

+ 78 hidden pages