Panasonic CF-31 User Manual

OPERATING INSTRUCTIONS
Personal Computer
Model No.
CF-31
series
Contents
Getting Started
Introduction .................................................................
Read Me First ............................................................
(Precautions)
Description of Parts ..................................................
First-time Operation ..................................................
Useful Information
On-screen Manual ....................................................
Handling and Maintenance .......................................
Reinstalling Software ................................................
11
14
18 19 21
Getting StartedUseful InformationTroubleshootingAppendix
For further information about the com­puter, you can refer to the on-screen manual. To access the on-screen manual
page 18 “On-screen Manual”
Troubleshooting
Troubleshooting (Basic) ............................................
Appendix
LIMITED USE LICENSE AGREEMENT ...................
Specifi cations ...........................................................
LIMITED WARRANTY ..............................................
23
27 29 32
Please read these instructions carefully before using this product, and save this manual for future use.
2
Getting Started
Introduction
Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully.
Terms and illustrations in these instructions
CAUTION
NOTE
Enter
+ F5 : Press and hold [Fn] key, and then press [F5] key.
Fn
(Start) - [All Programs] : Click (Start), and then click [All Programs]. You may need to double-click in some
: Page in these Operating Instructions or in the Reference Manual.
Some illustrations are simplifi ed to help your understanding and may look different from the actual unit.
If you do not log on as an administrator, you cannot use some functions or cannot display some screens.
Refer for the latest information about optional products to the catalogs, etc.
In these instructions, the names and terms are referred as follows.
“Genuine Windows® 7 Professional 32-bit Service Pack 1” and “Genuine Windows® 7 Professional 64-bit Service
Pack 1” as “Windows” or “Windows 7”
DVD MULTI drive as “CD/DVD drive”
Circular media including DVD-ROM and CD-ROM as “discs”
Disclaimer
Computer specifi cations and manuals are subject to change without notice. Panasonic Corporation assumes no li- ability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
: Conditions that may result in minor or moderate injury.
: Useful and helpful information.
: Press [Enter] key.
cases.
: Reference to the on-screen manuals.
Trademarks
Microsoft®, Windows®, the Windows logo, and IntelliMouse are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo­rated in the United States and/or other countries. Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation. HDMI, the HDMI Logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies.
3
Getting Started
Read Me First
Important Safety Instructions / Importantes Mesures De Sécurité
<Only for model with modem> When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fi re, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet base­ment or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this man­ual. Do not dispose of batteries in a fi re. They may explode. Check with local codes for possible special disposal instruc­tions.
SAVE THESE INSTRUCTIONS
19-E-1
Information to the User
<Only for model with wireless LAN/Bluetooth>
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic ener­gy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These stan­dards and recommendations refl ect the consensus of the sci- entifi c community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representa­tives of the organization. These situations may for example include:
<Pour modèles avec modem uniquement> Certaines mesures de sécurité doivent être prises pendant l’utilisation
de matérial téléphonique afi n de réduire les risques d’incendie, de choc électrique et de blessures. En voici quelquesunes:
1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver, dans un sous-sol humide ou près d’une piscine.
2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans fi l) pendant un orage électrique. Ceci peut présenter un risque de choc électrique causé par la foudre.
3. Ne pas utiliser l’appareil téléphonique pour signaler une fuite de gaz s’il est situé près de la fuite.
4. Utiliser seulement le cordon d’alimentation et le type de piles indiqués dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux règlements perti­nents quant à l’élimination des piles.
CONSERVER CES INSTRUCTIONS
Using this product on board of airplanes, or
In any other environment where the risk of interference to
other devices or services is perceived or identifi ed as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specifi c organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modifi cation of this product. The cor- rection of interference caused by such unauthorized modifi ca- tion will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.
19-F-1
26-M-1
Informations destinées aux utilisateurs
<Uniquement les modèles avec réseau local sans fi l et/ou Bluetooth>
Ce produit et votre santé
Ce produit, comme tout autre appareil radio, émet de l’énergie radioélectrique. Toutefois, la quantité d’énergie émise par ce produit est beaucoup moins importante que l’énergie radioélec­trique émise par des appareils sans fi l tels que les téléphones portables. L’utilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opère dans les limites des directives concernant les normes et les recom­mendations de sécurité sur les fréquences radio. Ces normes et recommandations refl ètent le consensus de la communauté scientifi que et résultent de délibérations de jurys et comités de scientifi ques qui examinent et interprètent continuellement les nouveautés de la vaste littérature sur les recherches effectuées. Dans certaines situations ou environnements, l’utilisation de ce produit peut être restreinte par le propriétaire du bâtiment ou par les représentants responsables de l’organisation. Ces situa­tions peuvent être les suivantes par exemple :
A bord d’un avion, ou
Dans tout autre environnement où les risques d’interférence
sur d’autres appareils ou services sont perçus ou identifi - ables comme dangereux.
Si vous n’êtes pas sûr de la réglementation applicable à l’utilisation d’appareils sans fi l dans une organization ou un environnement spécifi que, (par exemple dans un aéroport) nous vous invitons à demander l’autorisation d’utiliser ce produit avant sa mise en marche. Informations concernant la réglementation Nous déclinons toute responsabilité pour toute interférence radio ou télévision causée par des modifi cations non autorisées apportées à ce produit. La correction d’interférences causées par de telles modifi cations non autorisées sera la seule respon- sabilité de son utilisateur. Nousmêmes, les revendeurs offi ciels et les distributeurs ne sommes pas responsable de tout dégât ou de toute violation des règlements de l’État pouvant découler du non-respect de ces directives.
26-F-1
4
Getting Started
Read Me First
Lithium Battery / Pile au lithium
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
15-E-1
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et l’heure. La pile ne doit être remplacée que par un technicien qualifi é. Danger ! Risque d’explosion en cas de non respect de cette mise en garde!
CD/DVD Drive Caution
CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HERE­IN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
12-E-1
Laser safety information is appropriate only when drive with laser is installed.
12-M-2-1
AVERTISSEMENT!
CET APPAREIL UTILISE UN LASER. L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIATIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOIMÊME. CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.
Les mesures de sécurité relatives au laser ne s’appliquent que lors de l’installation d’une unité avec laser.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
15-F-1
12-F-1
12-F-2-1
53-M-1
Safety Precautions
<Only for model with wireless WAN> The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to con­vey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions.
When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer
or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive
The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interfer-
areas. Medical equipment may be sensitive to RF energy.
ence from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating wireless WAN modem away from the pacemaker, while it is on.
Switch off Personal Computer or Handheld Computer incorporating wireless WAN modem before boarding an aircraft.
Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both.
Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of fl am-
mable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard.
Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio fre-
quency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Hand­held Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interfer­ence or danger.
5
Getting Started
Road safety comes fi rst! Do not use a Personal Computer or Handheld Computer incorporating wireless WAN modem
while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal
Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may
Air bags infl ate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area
injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving.
deploy.
may be propelled with great force and cause serious injury to occupants of the vehicle.
IMPORTANT!
Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls. Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating wireless WAN modem must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock func­tions, fi xed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorpo­rating wireless WAN modem.
27-1-2
Models for U.S.A.
Federal Communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal­lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer­ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced
radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC RF Exposure Warning:
This equipment is provided with PC Card slot that could be
used with wireless transmitters, which will be specifi cally recommended when they become available.
Other third-party wireless transmitters have not been RF
exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
<Only for model with wireless LAN/wireless WAN/Bluetooth>
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
This equipment has been approved for portable operation,
and does not require any minimum spacing be provided between antennas and all person’s body.
This equipment may not be co-located or operated with any
other antenna or transmitter.
25-M-3
<Only for model with wireless WAN>
This PC with WWAN transmitter installed, has been ap-
proved for mobile operation and to assure compliance with RF exposure requirements, a minimum of 20 cm (8 inches) must be maintained between the WWAN antenna located in top of LCD and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
<Optional Car Mounter / Port Replicator>
This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter or Port Replicator for mobile external mounted antenna(s).
External antenna(s) must be professionally installed and
cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters.
For WLAN, the Car Mounter should be used with Radi-
all/Larsen WLAN whip antenna, type NMO5E2400BKTNC with 5dBi antenna gain or less. Also, user must maintain minimum 20 cm spacing between external antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
<Only for model with wireless LAN> This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675)
<Only for model with modem>
FCC Regulation Notice for modem This equipment contains a FCC approved modem.
1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other infor­mation, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this informa­tion must be provided to the telephone company.
25-M-5
25-M-W-5
6-M-1
6
Getting Started
Read Me First
2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.
3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed fi ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
4. If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to fi le a complaint with the FCC if you believe it is necessary.
5. The telephone company may take changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifi cations to maintain uninterrupted service.
6. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corpora­tion of North America at DIAL TOLL FREE 1-800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
7. There are no user serviceable parts contained in this equip­ment.
8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is sub­ject to state tariffs.
9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electron­ic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the fi rst page of the transmission, the date and time it is sent and an identifi ca- tion of the business or other entry, or other individual send­ing the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used.
10. According to the FCC’s electrical safety advisory, we rec­ommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equip­ment connected to AC power sources and that this is a major nationwide problem.
“Caution : To reduce the risk of fi re, use only No.26 AWG or
larger (e.g., 24 AWG) UL listed or CSA certifi ed telecommunica- tion line cord.”
“ATTENTION : Pour réduire le risque d’incendie, utiliser unique-
ment des conducteurs de télécommunications 26 AWG ou de section supérieure (p.ex. 24 AWG) UL énumérés ou CSA certi­ é.”
UL1604-conforming model. (The model which has description of “UL1604” in the bottom of the computer.)
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DI­VISION2, GROUPS A, B, C, AND D OR NON-HAZARDOUS LOCATIONS ONLY.
16-M-1
WARNING-EXPLOSION HAZARD-SUBSTITUTION OF COM­PONENTS MAY IMPAIR SUITABILITY FOR CLASSI, DIVI­SION2.
When connecting and using a device manufactured by a third party, enquire to the manufacturer as to whether the device suits CLASS1, DIVISION2.
33-M-1-1
USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recy­cling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149
65-M-2
<For USA-California Only>
This product contains a Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/
38-M-1
For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhi­cule Motorisé
Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If used for entertain­ment purpose, such as television reception or video play, it must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to determine lawful use of this product while operating within a motor vehicle.
Avertissement : L’ordinateur bloc-notes peut être installé dans un véhicule motorisé et dans le champ de vision du conduc­teur uniquement en tant que dispositif d’aide aux fonctions du véhicule, comme par exemple pour fournir des informations sur le véhicule, comme dispositif de contrôle de système, pour l’ob­servation à l’arrière ou sur les côtés du véhicule, ainsi que pour fournir de l’information routière. Pour toute utilisation à fi n de divertissement, comme par exemple pour regarder la télévision ou jouer à des jeux vidéo, il doit être installé à l’arrière du siège du conducteur, en un emplacement où il ne sera pas visible, ni directement ni indirectement, pour le conducteur du véhicule motorisé. Vérifi ez les lois fédérales et nationales qui régissent l’utilisation légale de cet appareil à l’intérieur d’un véhicule mo­torisé.
External Antenna FCC RF Exposure Warning:
This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter or Port Replicator for mobile external mounted antenna(s). Exter­nal antenna(s) must be professionally installed and cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters.
The maximum allowable antenna gain for the external WWAN
base whip antenna for the cellular band is 7.0 dBi and PCS band is 3.5 dBi. Also, user must maintain minimum 20 cm spacing between external antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wire­less modes of operation.
35-M-1
32-M-1-1
7
Getting Started
Models for Canada
<Only for model with modem>
Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affi xed on the modem unit.
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifi es certifi ed equip- ment. This certifi cation means that the equipment meets tele- communications network protective, operational and safety re­quirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecom­munications company. The equipment must also be installed us­ing an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certifi ed equipment should be coordinated by a rep- resentative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electri­cal ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such con­nections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.” “NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.” REN: See bottom of the computer
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL
“AVIS: L’étiquette d’Industrie Canada identifi e le matériel homo- logué. Cette étiquette certifi e que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur. Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la dégrada­tion du service dans certaines situations. Les réparations de matériel homologué doivent être coordon­nées par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisa­teur de débrancher un appareil à la suite de réparations ou de modifi cations effectuées par l’utilisateur ou à cause de mauvais fonctionnement. Pour sa propre protection, l’utilisateur doit s’assurer que tous les fi ls de mise à la terre de la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est parti­culièrement importante dans les régions rurales. Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements lui­même; il doit avoir recours à un service d’inspection des instal­lations électriques, ou à un électricien, selon le cas.” “AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de ter-
minaux qui peuvent être raccordés à une interface. La ter­minaison d’une interface téléphonique peut consister en une combinaison de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de touts les dispositifs n’excède pas 5.” IES: Voir sous le fond de l’ordinateur
17-Ca-1
Canadian ICES-003
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
7-M-2
<Only for model with wireless LAN/Bluetooth>
Industry Canada
This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
<Ne s’applique qu’aux modèes avec technologie Bluetooth/LAN sans fi l/WAN sans fi l>
Industrie Canada
Cet équipement est conforme à la norme CNR-210 d’ndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut produire de brouillage, et (2) ce dispositif doit accepter le brouillage, y compris le brouilla-
ge pouvant entraîner le fonctionnement non désiré de l’appareil.
30-Ca-1-1
<Only for model with wireless LAN> This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE­LAN devices. <Ne s’applique qu’aux modèes avec technologie LAN sans fi l> Cet appareil (pour réseaux locaux radioélectriques) dans les bandes de fréquences 5150-5250 MHz est réervéàune utili­sation àl’intéieur afi n de réuire le risque d’interféence avec les systèmes satellites mobiles bicanaux. Les radars forte puissance sont désignés comme étant les pre­miers utilisateurs (c’st-à-dire qu’ls ont la priorité) des bandes de fréquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer des interférences et/ou des domma­ges à ce périphérique.
30-Ca-2-1
This device has been designed to operate with the Radiall/ Larsen whip antenna, type NMO5E2400BKTNC WLAN an­tenna having a maximum gain of 5dB. A WLAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the an­tenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that re­quired for successful communication.
Cet appareil est conçu pour opérer avec l’antenne-fouet Ra­diall/Larsen, type WLAN NMO5E2400BKTNC, ayant un gain maximum de 5 dB. Les règlements d’Industrie Canada interdi­sent l’utilisation d’une antenne WLAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms.
8
Getting Started
Read Me First
Afi n de réduire le risque d’interférence radioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour assurer la communication.
<Only for model with wireless LAN/wireless WAN/Bluetooth>
This computer complies with Industry Canada radiation
exposure limits set forth for an uncontrolled environment. This PC with WLAN and/or Bluetooth transmitters installed,
has been approved for portable operation and does not re­quire any minimum spacing be provided between antennas and all person’s body.
<Ne s’applique qu’aux modèles avec technologie Bluetooth/LAN sans fi l/WAN sans fi l>
Cet équipement est conforme aux limites d’exposition aux
rayonnements d’Industrie Canada établies pour un environ­nement non contrôlé.
Ce PC avec émetteurs WLAN et/ou Bluetooth a été approu-
vé à des fi ns d’opération mobile; aucun espace minimum entre les antennes et le corps de l’utilisateur n’est requis.
FOR USE WITH MODEL NO. : CF-AA5713A POUR UTILISER AVEC MODÈLE : CF-AA5713A
CSA C22 2 NO.213-conforming model. (The model which has description of “CSA C22 2 NO.213” in the bottom of the com­puter.)
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DI­VISION2, GROUPS A, B, C, AND D OR NON-HAZARDOUS LOCATIONS ONLY.
25-Ca-1-1
20-Ca-1
WARNING-EXPLOSION HAZARD-SUBSTITUTION OF COM­PONENTS MAY IMPAIR SUITABILITY FOR CLASSI, DIVI­SION2.
When connecting and using a device manufactured by a third party, enquire to the manufacturer as to whether the device suits CLASS1, DIVISION2.
33-Ca-1
External Antenna
<For Canada> This device has been designed to operate with the WWAN antenna having a maximum gain of 7.0 dB for the cellular band and 3.5 dB for the PCS band. WWAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the an­tenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that re­quired for successful communication. <Utilisation au Canada> Cet appareil est conçu pour opérer avec une antenne WWAN (réseau étendu sans fi l) dont le gain maximum est fi xé à 7.0 pour la bande cellulaire et à 3.5 pour la bande de service de communications personnelles (PCS). Les règlements d’Indus­trie Canada interdisent l’utilisation d’une antenne WWAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms. Afi n de réduire le risque d’interférence radioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour assurer la communication.
32-Ca-1-1
Models for Australia
For Used in Motor Vehicle
Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If the Notebook Computer is to be used for work or entertainment purposes, such as television reception, video play or other work programs, it must be installed in a position where it will NOT: (a) be visible, directly or indirectly, to the operator of the motor vehicle; or (b) cause distraction to drivers of other motor vehicles. Check with individual state laws to determine lawful use of this product while operating within a motor vehicle. If the visual display unit is, or is part of, a driver's aid, above rule is not applied. "Driver's aid" includes closed-circuit television security cameras, dis­patch systems, navigational or intelligent highway and vehicle system equipment, rear view screens, ticket-issuing machines and vehicle monitoring devices.
35-A-1
9
Getting Started
Precautions
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS SORIES
*2
, LIFE SUPPORT SYSTEMS OR OTHER EQUIP-
*1
, MEDICAL DEVICES OR ACCES-
MENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1
AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2
Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of fl ight (e.g., during take- off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defi ned by FAA: AC (Advi- sory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leafl ets) No.36.
*2
As defi ned by the European Medical Device Directive (MDD)
93/42/EEC.
Panasonic cannot guarantee any specifi cations, technolo-
gies, reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards and medical equipment standards that differ from the specifi cations of our COTS (Commercial-Off-The-Shelf) products.
Panasonic cannot guarantee any specifi cations, technolo- gies, reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards that exceed the specifi cations of our COTS (Com- mercial-Off-The-Shelf) products.
This computer is not inten
ded for use in medical equipment in­cluding life-support systems, air traffi c control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. The CF-31 was developed based on thorough research into the real-world portable computing environments. Exhaustive pursuit of usability and reliability under harsh conditions led to innova­tions such has the magnesium alloy exterior, vibration damped hard disk drive and fl oppy disk drive, fl exible internal connec- tions. The CF-31’s outstanding engineering has been tested using the strict MIL-STD- 810F (for vibration and shock) and IP (for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid any damage. The following usage and handling procedures are recommended.
Before putting the computer away, be sure to wipe off any moisture.
If a Malfunction or Trouble Occurs, Immediately Stop Use If a Malfunction Occurs, Immediately Unplug the AC Plug
and the Battery Pack
This product is damaged
Foreign object inside this product
Smoke emitted
Unusual smell emitted
Unusually hot
Continuing to use this product while any of the above conditions are present may result in fi re or electric shock.
If a malfunction or trouble occurs, immediately unplug the
AC plug and remove the unit from this product. Then, contact your technical support offi ce for repair.
Do Not Touch This Product In a Thunderstorm If Connected with the AC Cable or Any Other Cables
Electric shock may result.
Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet
Otherwise, a fi re due to overheating may result. Connecting to a
DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet specifi cally approved for such use.
Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor
Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in fi re, short cir- cuit, or electric shock.
Do Not Pull or Insert the AC Plug If Your Hands Are Wet
Electric shock may result.
Clean Dust and Other Debris of the AC Plug Regularly
If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fi re.
Pull the plug, and wipe it with a dry cloth.
Pull the plug if the computer is not being used for a long pe­riod of time.
Insert the AC Plug Completely
If the plug is not inserted completely, fi re due to overheating or electric shock may result.
Do not use a damaged plug or loose AC outlet.
Close the Connector Cover Tightly When Using This Prod­uct Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc.
The entry of foreign matter may cause a fi re or electric shocks.
If foreign matter has found its way inside, immediately turn
the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support offi ce.
Do Not Disassemble This Product
The high-voltage areas inside may give you an electric shock, or foreign matter may enter and result in a fi re.
Keep SD Memory Cards Away from Infants and Small Chil­dren
Accidental swallowing will result in bodily injury.
In the event of accidental swallowing, see a doctor imme­diately.
Do Not Place This Product on Unstable Surface
If balance is lost, this product may fall over or drop, resulting in an injury.
Avoid Stacking
If balance is lost, this product may fall over or drop, resulting in an injury.
Do Not Leave This Product in High Temperature Environ­ment for a Long Period of Time
Leaving this product where it will be exposed to extremely high temperatures such as near fi re or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fi re or electric shocks.
Do Not Block the Ventilation Hole (Exhaust)
Using this product wrapped in cloth or on top of bedding or a blanket can block the ventilation hole and cause heat to build up inside. Possibly resulting in a fi re.
Hold the Plug When Unplugging the AC Plug
Pulling on the cord may damage the cord, resulting in a fi re or electric shock.
Do Not Move This Product While the AC Plug Is Connected
The AC cord may be damaged, resulting in fi re or electric shock.
If the AC cord is damaged, unplug the AC plug immediately.
Use Only the Specifi ed AC Adaptor With This Product
Using an AC adaptor other than the one supplied (supplied with the unit or one sold separately as an accessory) may result in a fi re.
Do Not Subject the AC Adaptor to Any Strong Impact
Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fi re.
10
Getting Started
Read Me First
Take a Break of 10-15 Minutes Every Hour
Using this product for long periods of time may have detrimental health effects on the eyes or hands.
Do Not Turn the Volume Up To Loud When Using Head­phones
Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing.
Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specifi ed, into the LAN Port
If the LAN port is connected to a network such as the ones listed right, a fi re or electric shock may result.
Networks other than 1000BASE-T, 100BASE-TX or
10BASE-T
Phone lines (IP phone (Internet Protocol Telephone), Tele-
phone lines, internal phone lines (on-premise switches), digital public phones, etc.)
Precautions (Battery Pack)
Do Not Use With Any Other Product
The battery pack is rechargeable and was intended for the specifi ed product. If it is used with a product other than the one for which it was designed, electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Charge the Battery Using Methods Other Than Those Specifi ed
If the battery is not charged using one of the specifi ed methods, electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Throw the Battery Pack Into a Fire or Expose It to Excessive Heat
Generation of heat, ignition or rupture may result.
Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example)
Electrolyte leakage, generation of heat, ignition or rupture may result.
Do Not Insert Sharp Objects Into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Modify It
Electrolyte leakage, generation of heat, ignition or rupture may result.
If this product is subjected to a strong impact, stop using it im-
mediately.
Do Not Short the Positive (+) and Negative (-) Contacts
Generation of heat, ignition or rupture may result.
Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
Do Not Use This Product with a Battery Pack Other Than the One Specifi ed
Use only the specifi ed battery pack ( page 11) with your prod­uct. Use of battery packs other than those manufactured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture).
When the battery pack has become degraded, replace it with a new one
Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture.
Do not touch the terminals on the battery pack. The battery pack may
no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet.
If the battery pack will not be used for a long period of time (a month
or more), charge or discharge (use) the battery pack until the remain­ing battery level becomes 30% to 40% and store it in a cool, dry place. This computer prevents overcharging of the battery by recharging only
when the remaining power is less than approx. 95% of capacity. The battery pack is not charged when the computer is fi rst purchased.
Be sure to charge it before using it for the fi rst time. When the AC adaptor is connected to the computer, charging begins automatically. Should the battery leak and the fl uid get into your eyes, do not rub
your eyes. Immediately fl ush your eyes with clear water and see a doctor for medical treatment as soon as possible.
Do Not Use With Exposing the Skin To This Product For a Long Period of Time
Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn.
Do Not Expose the Skin to This Product When Using the Product In a Hot or Cold Environment
Burns, low-temperature burns or frostbite may result.
n it is necessary to expose the skin to this product such
Whe
as to
scan a fi ngerprint, perform the operation in the
est time possible.
<Only for model with modem>
Use the Modem with a Regular Telephone Line
Connection to an internal phone line (on-premise switches) of a company or business offi ce, etc. or to a digital public phone or use in a country or area not supported by the computer may result in a fi re or electric shocks.
Do not place the computer near a television or radio receiver.
Keep the computer away from magnets. Data stored on the
hard disk may be lost.
CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
ATTENTION:
Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux instructions.
NOTE
The battery pack may become warm during recharging or
normal use. This is completely normal.
Recharging will not commence if internal temperature of the
battery pack is outside of the allowable temperature range (0 °C to 50 °C {32 °F to 122 °F}).
(
Reference Manual “Battery Power”) Once the allow-
able range requirement is satisfi ed, charging begins auto- matically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or below.)
If the temperature is low, the operating time is shortened.
Only use the computer within the allowable temperature range.
This computer has a high temperature mode function that
prevents the degradation of the battery in high temperature environments. (
level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode.
The battery pack is a consumable item. If the amount of
time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.
When transporting a spare battery inside a package, brief-
case, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
Always power off the computer when it is not in use. Leaving
the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.
Reference Manual “Battery Power”) A
short-
58-E-1
58-F-1
11
Getting Started
Description of Parts
A
B
C D
E
F
MA
A: Wireless LAN Antenna / Bluetooth Antenna
<Only for model with wireless LAN>
Reference Manual “Wireless LAN”
<Only for model with Bluetooth>
Reference Manual “Bluetooth”
B: Camera
<Only for model with Camera>
C: Wireless WAN Antenna
<Only for model with wireless WAN>
Reference Manual “Wireless WAN”
D: GPS Antenna (Rear side)
<Only for model with GPS>
E: LCD
Reference Manual “Screen Input Operation”
(Only for model with touchscreen)
F: Function Key
Reference Manual “Key Combinations”
G: Keyboard H: Touch Pad I: LED Indicator
: SD Memory Card Indicator
(Blinking: During access)
Reference Manual “SD Memory Card”
: Wireless ready
This indicator lights when Wireless LAN, Blue­tooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.
Reference Manual “Wireless LAN”, “Bluetooth”,
“Disabling/Enabling Wireless Communication”, “Wireless WAN”
: Caps lock
Left side
G H
I
J K
L
: Numeric key (NumLk)
N P T UR SQO
: Scroll lock (ScrLk) : Hard disk drive status : Multimedia pocket device status or the second
battery status.
: Battery status
Reference Manual “Battery Power”
: Power status
(Off: Power off/Hibernation, Green: Power on, Blinking green: Sleep, Blinking green rapidly: Cannot power on or resume due to low tempera­ture.)
J: Power Switch K: Carrying Handle L: Stylus Holder M: Fingerprint Reader
<Only for model with Fingerprint Reader>
Reference Manual “Fingerprint Reader”
N: ExpressCard Slot
Reference Manual “PC Card / ExpressCard”
O: PC Card Slot
Reference Manual “PC Card / ExpressCard”
P: Multimedia Pocket
Reference Manual “Multimedia Pocket”
Q: Wireless Switch
Reference Manual “Disabling/Enabling Wireless
Communication”
R: Smart Card Slot
Reference Manual “Smart Card”
S: SD Memory Card Slot
Reference Manual “SD Memory Card”
T: Battery Pack
Specifi ed Battery pack: CF-VZSU46AU
U: Ventilation Hole (Exhaust)
A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.
L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.
48-M-1
12
Getting Started
Description of Parts
Right side
Rear side Bottom
IJ L MNOPK
*1E*2E*3
E
D H
FGA CB
Q
R S
A: Hard Disk Drive
Reference Manual “Hard Disk Drive”
B: HDMI Port
Reference Manual “External Display”
C: SIM Card Slot
<Only for model with wireless WAN> Insert the SIM card into the SIM card slot with the
contact side facing down and the cut corner facing forward.
Reference Manual “Wireless WAN”
D: LAN Port
Reference Manual “LAN”
*1
E: 2nd LAN Port
Connector
/ Modem Port*2 / IEEE 1394 Interface
*3
*1 <Only for model with 2nd LAN>
Reference Manual “LAN”
*2
<Only for model with Modem>
Reference Manual “Modem”
*3 <Only for model with IEEE 1394>
Reference Manual “IEEE 1394 Devices”
F: USB Port (2.0)
Reference Manual “USB Devices”
G: USB Port (3.0)
Reference Manual “USB Devices”
H: DC-IN Jack I: Security Lock
A Kensington cable can be connected. For further information, read the manual that comes
with the cable.
J: USB Port (2.0)
Reference Manual “USB Devices”
K: External Antenna Connector L: Expansion Bus Connector
Reference Manual “Port Replicator / Car
Mounter”
M: External Display Port (VGA)
Reference Manual “External Display”
N: Headphone Jack
You can connect headphones or amplifi ed speakers.
When they are connected, audio from the internal speakers is not heard.
O: Microphone Jack
A condenser microphone can be used. If other types
of microphones are used, audio input may not be pos­sible, or malfunctions may occur as a result.
P: Serial Port Q: RAM Module Slot
Reference Manual “RAM Module”
R: Speaker
<Only for model with Camera> Do not turn the speaker volume and/or microphone
volume up too loud. Feedback noise may occur.
Reference Manual “Key Combinations”
S: Ventilation Hole (Intake)
Loading...
+ 28 hidden pages