Panasonic BY-HPE11KTA Specification

Coaxial - LAN Converter with PoE function

BY-HPE11KTA

Camera Adaptor Center Adaptor

Easy migration from analog to IP system with existing coaxial cable

The BY-HPE11KTA is a coaxial - LAN converter capable of implementing long distance, high speed digital data transmission on existing coaxial cabling with low setup costs. With the built-in PoE function, the BY-HPE11KTA is able to supply power to Panasonic network cameras, which eliminates the need for installing power outlets for the cameras.

Key Features

PoE (Power over Ethernet) ready

The coaxial - LAN converter is compliant with PoE standards (IEEE

802.3af), and contains a power supplying device. PoE can be used to supply power to Panasonic network cameras, which eliminates the need for installing power outlets for the cameras.

Use over long distances

The coaxial - LAN converter can be used for distances of up to 500 m (1,640 feet 5 inches)*1 for PoE connections, and 2 km (6,561 feet 8 inches) for non-PoE connections. (When used with RG-6/U coaxial cable.)

High-speed transmission

The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections. (When used with RG-6/U coaxial cable, and for distances under 2 km [6,561 feet 8 inches].)

No setup required

Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter.

System Example

Standard Accessories

• Installation Guide ...........................1 pc.

• CD-ROM*

The followings are for installation.

• AC Cord .........................................1 pc.

• Safety Wire ....................................1 pc.

.....................................1 pc.

• BNC Connector Cover ................ 2 pcs.

• Screw for the Safety Wire and BNC

Connector Covers ...................... 3 pcs.

*1 Contains the documentation including the

Operating Instructions.

Optional Accessory

Rack Mount Connecting Fitting

BY-HCA10A

(for mounting three or four Center Adaptor)

• Mounting Bracket ........................ 2 pcs.

•

Underside Continuous Connecting Bracket

..................................................... 2 pcs.

• Screw (Flat-head M3 x 6) .......... 32 pcs.

• Screw (M3 x 6) ............................. 6 pcs.

*1 When connected to a Panasonic network camera. For other cameras the connection distance is 300 m (984 feet 3 inches).

*2 Measured using Linux

FTP.

Camera Adaptor

Network Camera

* When using a Panasonic network camera

With PoE function: 500 m (1,640 feet 5 inches)* Without PoE function: 2 km (6,561 feet 8 inches)*

Coaxial cable

Digital Signals

Center Adaptor

Power Supply

Network Disk Recorder

Power Source

Ethernet cable

Speciﬁcations

Center Adaptor

Items Speciﬁcations

Operating Environment Temperature: 0 °C (32 °F) to 50 °C (122 °F) Humidity: 20 %–85 % (no condensation) Interfaces 10Base-T/100Base-TX x 1 AUTO MDI/MDI-X AC inlet BNC connector Dimensions (W x H x D) About 105 mm x 44 mm x 210 mm (4 1/8 inches x 1 3/4 inches x 8 1/4 inches) (main body only) Mass (Weight) About 570 g (1.26 lb) Power Supply AC 100–240 V 50/60 Hz Power Consumption Coaxial Cable Power Maximum 22 W Supply Capability

Camera Adaptor

Items Speciﬁcations

Operating Environment Temperature: -10 °C (14 °F) to 50 °C (122 °F) Humidity: 20 %–90 % (no condensation) Interfaces 10Base-T/100Base-TX x 1 AUTO MDI/MDI-X (PoE compatible) BNC connector Dimensions (W x H x D) About 80 mm x 115 mm x 35 mm (3 1/8 inches x 4 1/2 inches x 1 3/8 inches) (main unit only) Mass (Weight) About 165 g (0.36 lb) Power Supply Power Consumption Included in the center adaptor’s power consumption PoE Power Supply Capability Maximum 15.4 W

Coaxial Interface

Items Speciﬁcations

Standard Panasonic original system Frequency Range 2 MHz–28 MHz Data Transfer Mode Wavelet OFDM Access Method CSMA/CA Error Correction Reed-Solomon Code + Convolutional Code (Viterbi decoding)

LAN Interface

Items Speciﬁcations

Standard IEEE802.3/IEEE802.3u (10Base-T/100Base-TX) MDI/MDI-X Cross/Straight cable automatic recognition Transmission Rate 10 Mbps/100 Mbps (Auto-Sensing) Number of Ports 1 (RJ-45 connector) Protocol TCP/IP/UDP Access Method CSMA/CD

Connection Speciﬁcations

Items Speciﬁcations

Number of adaptors that can 1 camera adaptor can be connected via coaxial cable for each be communicated with center adaptor Connectable Devices Camera adaptor: Panasonic network cameras Number of devices that can A maximum of 256 center adaptors or camera adaptors can be be connected connected in 1 segment

Maintenance Screen Speciﬁcations

Items Speciﬁcations

Compatible Operating Systems Web Browser Internet Explorer

Performance Speciﬁcations

Items Speciﬁcations

Transmission Speed distances under 2 km [6,561 feet 8 inches]) Transmission Speed distances under 2 km [6,561 feet 8 inches]) Maximum Transmission Without PoE function: 2 km (6,561 feet 8 inches) Distance With PoE function: 500 m (1,640 feet 5 inches) (when using a Panasonic network camera) / 300 m (984 feet 3 inches) (when using a Class0 standard network camera)

*1 This value is for transmissions between the center adaptor and camera adaptor. The transmission speed when using an RG-6/U coaxial cable may very depending on factors such as the coaxial cable condition and network environment. The values shown here measured in environments not affected by cable or network environment conditions. *2 Measured using Linux

Maximum Transmission Distance / PoE Power Supply (when using RG-6/U coaxial cable) Speciﬁcations

Maximum 300 m 500 m 1,000 m 1,500 m 2,000 m Transmission (984 feet 3 (1,640 feet 5 (3,280 feet (4,921 feet 3 (6,561 feet 8 Distance inches) inches) 10 inches) inches) inches) Power Supplied by PoE

*1 When connecting an IEEE802.3af (Alternative B, class0) network camera to the camera adaptor. *2 When connecting a Panasonic network camera to the camera adaptor. *3 Turn the PoE switch [OFF] in this situation.

Maximum about 28 W (including the power consumption of the camera adaptor)

Original power system (DC 55 V from the center adaptor via the coaxial cable)

Center adaptor: devices equipped with 10Base-T/100Base-TX interfaces

Microsoft® Windows® XP, Windows Vista®, Windows® 7

(UDP) 45 Mbps or higher (when using an RG-6/U coaxial cable at

(TCP*2) 35 Mbps or higher (when using an RG-6/U coaxial cable at

FTP.

15.4 W

6.0, 7.0, 8.0 or later

12.0 W

Cannot supply power with PoE

Part Names and Functions

Center Adaptor

Front View

Rear View

Indicators SPEED Button INITIAL SET Button Network Connector

BNC Connector AC IN

Camera Adaptor

Front View

Rear View

Indicator PoE Switch BNC Connector Network Connector INITIAL SET Button

Used when attaching the camera adaptor to a ceiling or wall with screws Used when attaching the safety wire Used when attaching the camera adaptor to screws inserted into a ceiling or wall

Appearance

Center Adaptor

210(8-1/4")

105(4-1/8")

(1-3/4")

Trademarks and registered trademarks

Microsoft, Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of

– Microsoft Corporation in the United States and/or other countries. – Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. – "Super Dynamic", "SDII", "SDIII", "SD5", "SD5Link", "i-PRO" and "i-PRO SmartHD" logos are trademarks or registered trademarks of Panasonic Corporation.

Important

Safety Precaution: carefully read the operating instructions and installation manual before using this product.

– –

Panasonic can not be responsible for network performance and/or other manufacturer products that

reside on the network.

• All TV pictures are simulated.

• Masses and dimensions are approximate.

• Speciﬁcations are subject to change without notice.

• These products may be subject to export control regulations.

Camera Adaptor

80(3-1/8")

35(1-3/8")

115(4-1/2")

Unit: mm (inches)

DISTRIBUTED BY:

http://panasonic.net/security/

Printed in Japan (2A-067AL)