Selectable Gadget pack
You can set it yourself and select it later.
You can select from the following five types of pack.
Type A Type B Type C Type D Type E
Second Battery
Pack
Smart Card
Reader
Fingerprint
Reader
ContactlessSmart Card
Reader
Inserting/Removing the Selectable Gadget pack
1. Turn off the computer and disconnect the AC adaptor.
2.
Turn your computer over and remove the battery pack ( Replacingthe Battery Pack).
Make sure no foreign objectsare under the computer.
3. Insert/Remove the Selec table Gadget pack.
To remove
1. Remove the screw (A).
2. Slide the latch (B), and pull out the Selectable Gadget pack (C).
ContactlessSmart Card Reader / Fingerprint
Reader
To insert
1. Slide the Selectable Gadget packin parallelwith the arrow direction untilit click to the secured position.
2. Tighten the screw (D) firmly.
4. Insert the Battery Pack.