Panasonic 9TGCF 293 Users Manual

XP 2000
Personal Computer
OPERATING INSTRUCTIONS
Model No. CF-29 Series
Contents
Getting Started
Read Me First...................................................3
First-time Operation .......................................10
Reference Manual
Read Me First
Key Combinations
Operation
Starting Up/Shutting Down............................15
Touch Pad (Basic Operation) .............................18
Reference Manual .........................................19
Useful Information .........................................20
LED Indicators
Getting Started
[Additional Manual]
Reference Manual
This manual can be accessed on your computer. Refer to page 20 on how to access the Reference Manual.
Reference Manual
Touch Pad
Touchscreen
Standby/Hibernation
Functions
Security Measures
Computing on the Road
Battery Power
Multimedia Pocket
PC Cards
RAM Module
Port Replicator
Printer
External Display
USB Devices
Modem
LAN
WiressLAN
Hard Disk Drive
Setup Utility
Troubleshooting
List of Error Codes ........................................24
Dealing with Problems (Summary).......................25
Reinstalling Software ....................................30
Reference Manual
Technical Information
DMI Viewer
List of Error Codes
Dealing with Problems
(Advanced)
Appendix
LIMITED USE LICENSE AGREEMENT .......... 32
Hard Disk Backup Function ............................. 34
Hard Disk Data Erase Utility ............................ 38
Specifications................................................... 39
LIMITED WARRANTY ..................................... 41
Operation
Troubleshooting
Appendix
Please read these instructions carefully before using this product and save this manual for future use.
Customer's Record
Model No.*
Serial No.
or Code No.
Date of Purchase
* For the Model No., insert the 12 digit number (for example, CF-29CTKGZKM) located on
the bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer.
Illustrations and Terminology in this Manual
NOTE: NOTE provides a useful fact or helpful information.
Getting Started
CAUTION: CAUTION indicates a condition that may result in minor or moderate injury. WARNING: WARNING indicates a hazard that may result in moderate or serious injury.
Windows XP : Information for Microsoft® Windows® XP Professional users. Windows 2000 : Information for Microsoft® Windows® 2000 Professional users.
Enter : This illustration means to press the [Enter] key. Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.
[Start] - [Run]: This illustration means to click [Start], then to click [Run]. For some applications, you may need to
double-click.
: Where to go for referred information. : This illustration means to refer to the Reference Manual, which is available on your computer.
Refer to page 20 on how to access this manual.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. The “CD Drive” is a description about drives, such as DVD-ROM, CD-ROM, CD-R/RW, and DVD-ROM & CD-R/RW drives. This manual covers two types of models, as distinguished by the type of LCD screen (models with touchscreen and models without touchscreen). If the user has logged on without the administrator authority, some functions may not be executable, and some screens may be not displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions. Confirm the latest information on optional products in catalogs, etc.
Dealer's Name
Dealer's Address
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein.
©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries.
®
PS/2
is a registered trademark of International Business Machines Corporation.
Intel, Pentium, SpeedStep and PROSet are either registered trademarks or trademarks of Intel Corporation.
®
Adobe
and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.
2
Read Me First
For U.S.A.
Federal Communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra­dio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RF Exposure Warning: This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way Secaucus, NJ 07094 T el No:1-800-LAPTOP-5 (1-800-527-8675)
FCC RF Exposure Warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and minimum 2.5 cm spacing must be provided between antenna and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This transmitter must not be co-located or operated in conjunc­tion with any other antenna or transmitter.
FCC Regulation Notice for modem This equipment contains a FCC approved modem.
Manufacturer of modem: AMBIT Microsystems Corporation Model No. T60M283.00
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the telephone company.
2. An FCC compliant telephone cord and modular plug is pro­vided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring us­ing a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.
3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in re­sponse to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as deter­mined by the total RENs, contact the local telephone com­pany.
4. If your telephone equipment cause harm to the telephone net­work, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will no­tify the customer as soon as possible. Also, you will be ad­vised of your right to file a complaint with the FCC if you believe it is necessary.
5. The telephone company may take changes in it’s facilities, equipment, operations or procedures that could affect the op­eration of the equipment. If this happens the telephone com­pany will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
6. If trouble is experienced with this equipment, for repair or warranty information, please contact Matsushita Electric Corporation of America at DIAL TOLL FREE 1-800-LAP­TOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may re­quest that you disconnect the equipment until the problem is resolved.
7.
There are no user serviceable parts contained in this equipment.
8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine un­less such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to pro­gram this information into your fax software, you should re­fer to the manual of the Fax software being used.
Getting Started
3
Read Me First
10.According to the FCC’s electrical safety advisory , we recom­mend that you may install an AC surge arrestor in the AC out­let to which this equipment is connected. Telephone compa­nies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide prob­lem.
“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom­munication line cord.” “ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure.”
For Canada
Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit.
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified
Getting Started
equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate T erminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility , telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.”
“NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.”
REN: See bottom of the computer
Notice for the products using LCD
This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some compo­nents. Disposal of these materials may be regulated in your com­munity due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL
“AVIS: L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences tech­niques relatives au matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur. Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise lo­cale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L ’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la dégradation du service dans certaines situations. Les réparations de matériel homologué doivent être coordonnées par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de réparations ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement. Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales. A vertissement: L ’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un ser­vice d’inspection des installations électriques, ou à un électricien, selon le cas.” “AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La terminaison d’une interface téléphonique peut consister en une combinaison de quelques dispositifs, à la seule condi­tion que la somme d’indices d’équivalence de la sonnerie de touts les dispositifs n’excède pas 5.”
IES: Voir sous le fond de l’ordinateur
Industry Canada
This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
4
Important Safety Instructions / Importantes Mesures De Sécurité
When using your telephone equipment, basic safety pre­cautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the fol­lowing:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2.Avoid using a telephone (other than a cordless type) dur­ing an electrical storm. There may be a remote risk of electric shock from lightning.
3.Do not use the telephone to report a gas leak in the vicin­ity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special dis­posal instructions.
SAVE THESE INSTRUCTIONS
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this prod­uct however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we be­lieve this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific com­munity and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible rep­resentatives of the organization. These situations may for ex­ample include:
Using this product on board of airplanes, or In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wire­less devices in a specific organization or environment (e.g. air­ports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Certaines mesures de sécurité doivent être prises pendant l'utilisation de matérial téléphonique afin de réduire les risques d'incendie, de choc électrique et de blessures. En voici quelquesunes:
1. Ne pas utiliser l'appareil près de l'eau, p.ex., près d'une baignoire, d'un lavabo, d'un évier de cuisine, d'un bac à laver, dans un sous-sol humide ou près d'une piscine.
2.Éviter d'utiliser le téléphone (sauf s'il s'agit d'un appareil sans fil) pendant un orage électrique. Ceci peut présenter un risque de choc électrique causé par la foudre.
3.Ne pas utiliser l'appareil téléphonique pour signaler une fuite de gaz s'il est situé près de la fuite.
4.Utiliser seulement le cordon d'alimentation et le type de piles indiqués dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser . Se conformer aux règlements pertinents quant à l'élimination des piles.
CONSERVER CES INSTRUCTIONS
Getting Started
Lithium Battery
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or mis­application may possibly occur.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données comme la date et l'heure notamment. Elle ne devra être remplacée que par un technicien qualifié. Avertissement! Risque d'explosion en cas de non respect de cette mise en garde!
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modification of this product. The cor­rection of interference caused by such unauthorized modifica­tion will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.
5
Read Me First
Precautions
The CF-29 was developed based on thorough research into the real-world portable computing environments. Exhaustive pur­suit of usability and reliability under harsh conditions led to in­novations such has the magnesium alloy exterior, vibration damped hard disk drive and floppy disk drive, flexible internal connections. The CF-29’s outstanding engineering has been tested using the stiff MIL-STD- 810F (for vibration and shock) and IP (for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid any damage. The following usage and handling procedures are recommended.
Before putting the computer away, be sure to wipe of f any mois­ture.
Avoid Radio Frequency Interference
Do not place the computer near a television or
Getting Started
radio receiver.
Avoiding low-temperature burns
Avoid more than casual contact with any heat pro­ducing area of the notebook computer, AC adap­tor, and any option or accessory you use with it. Even low heat, if warmer than body temperature, can cause a burn, if the skin is exposed to the heat source for a long enough period of time.
Avoid Magnetic Fields
Keep the computer away from magnets. Data stored on the hard disk may be lost.
Keep Small Objects Away
Do not insert paper clips or other small objects into the computer.
Do Not Disassemble the Computer
Do not attempt to disassemble your computer.
Avoid Excessive Force on the Display
Do not apply excessive downward force on the display when it is completely opened, especially when plugs and/or cables are connected to the rear of the computer.
Precautions (Battery Pack)
Care should be exercised with regard to the following in or­der to avoid the possibility of overheating, fire or damage.
Avoid Heat
Do not throw the battery pack into a fire or ex­pose it to excessive heat.
Keep Articles Away
Do not place the battery pack together with articles such as necklaces or hairpins when carrying or stor­ing.
Do Not Disassemble
Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it.
Do Not Short
Do not short the positive (+) and negative (-) con­tacts.
Avoid Extreme Heat, Cold and Direct Sunlight
Do not charge, use or leave the battery pack for ex­tended periods where it will be exposed to direct sunlight, in a hot place (in an automobile on a sunny day, for example), or in a cold place.
Do Not Use With Any Other Computer
The battery pack is rechargeable and was intended for the specified computer or charger . Do not use it with a computer other than the one for which it was designed.
Do Not Put into a Microwave
Do not put the battery pack into a microwave oven or a pressurized chamber.
Stop Using
Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, remove it from the computer or charger and stop using it.
Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet.
6
Precautions (Battery Pack)
If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. This computer prevents overcharging of the battery by re­charging only when the remaining power is less than approx. 95% of capacity. The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible.
NOTE
The battery pack may become warm during recharging or normal use. This is completely normal. Recharging will not commence outside of the allowable temperature range (0 °C to 50 °C {32°F to 122 °F})
“Battery Power”. Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or below.) If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. This computer has a high temperature mode function that prevents the degradation of the battery in high tempera­ture environments. ( “Battery Power”) If the high temperature mode is enabled in the Setup Utility ( “Setup Utility”), a level of 100% in the [High Temperature] mode is about a level of 80% in the [Normal Temperature] mode. The battery pack is a consumable item. If the amount of time the computer can be run off a particular battery pack becomes dramatically shorter and repeated recharging do not restore its performance, the battery pack should be replaced with a new one. When transporting a spare battery inside a package, brief­case, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.
Getting Started
7
Names and Functions of Parts
The illustrations shown may differ from the actual physical appearances.
Function Keys
For information on the key combinations available ( “Key Combinations”).
Keyboard
Touch Pad
( page 18)
Getting Started
Power Switch
Before using the computer for the first time, care­fully read the [Limited Use License Agreement]. If you agree to the conditions, remove the seal.
Hard Disk Drive
( “Hard Disk Drive”)
LCD
(Only for models with touchscreen:
“Touchscreen”)
DC-IN Jack
USB Port
( “USB Devices”)
LAN
( “LAN”)
Modem
( “Modem”)
PC Card slots
( “PC Cards”)
DC IN 15.6V
Wireless LAN Antenna
( “Wireless LAN”)
Multimedia Pocket (Floppy Disk Drive)
( “Multimedia Pocket”)
LED Indicators
Battery Pack
( “Battery Power”)
( “LED Indicators”)
Caps lock Numeric key lock (NumLk) Scroll lock (ScrLk) Multimedia pocket device status Hard disk drive status Power status of the multimedia pocket
LED Indicators
( “LED Indicators”)
Battery pack status Power status
Carrying Handle
For enhanced portability and in­the-field efficiency.
8
Headphone Jack
Use this connector to connect headphones or amplifier­equipped speakers. Audio out­put from the internal speaker is disabled when headphones or external speakers are connected.
Security Lock
A cable can be connected to pre­vent theft of your computer. For more information, read the manual that comes with the cable.
External Keyboard/Mouse Port
LOCK
External Display Port
( “External Display”)
Parallel Port
Serial Port
Expansion Bus Connector
( “Port Replicator”)
Microphone Jack
Use only a monaural condenser microphone (miniature jack). Using an input source other than a monaural condenser micro­phone may not allow audio to be input or may damage the equipment.
NOTE
When using a external microphone, do not remove the check mark for “Mute” under “Microphone Balance” of the Volume Control dialog box and do not increase the playback volume. Howling may result. Howling may occur in the same way when disconnecting an external microphone. (The microphone of “Volume Control” is in the state of mute at the time of factory shipment. This is not shown at the time of factory shipment.)
Getting Started
RAM Module Slot
( “RAM Module”)
A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8­BATTERY for information on how to recycle this battery.
L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.
Speaker
To adjust the volume:
Fn + F5 / Fn + F6
Speaker on/off : Fn + F4
9
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations.
1 Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are missing or are not working properly, contact Panasonic Technical Support.
AC Adaptor ............................... 1 AC Cord..................................... 1
Model No : CF-AA1653A
Battery Pack.............................. 1 Modem Telephone Cable.......... 1
Model No : CF-VZSU29
Getting Started
Latch
Operating Instructions (This book)............................................................. 1
Windows® Book ...................................................................................... 1
Product Recovery CD-ROM
Windows XP ............................................................................................ 3
Windows 2000 ......................................................................................... 2
<Only for models with touchscreen>
Soft Cloth ..................................1 Stylus .....................................1
( “Touchscreen”)
2 Read the LIMITED USE LICENSE AGREEMENT. ( page 32)
Before removing the seal covering the power switch, read the LIMITED USE LICENSE AGREEMENT.
3 Insert the battery pack.
1 Unlock the cover by sliding the latch to the right.
10
2 Slide the latch down, and then without releasing it, open the cover as illustrated.
Cover
3 Slide the battery pack inward until it is firmly in place.
CAUTION
Do not touch the terminals on the battery pack and the computer. The battery
4
3
pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly. Be sure to insert the battery pack as illustrated.
4 Close the cover, then lock it by sliding the latch to the left.
CAUTION
Confirm that the latch lock is correctly in place. If you carry your computer without the latch lock in place, the battery pack may fall out. Before using the battery pack, carefully read “Precautions (Battery Pack)” ( page 6-7).
DC Plug
3
DC-IN Jack
DC IN 15.6 V
2
Latch
4 Connect your computer to a power outlet.
CAUTION
Getting Started
Be sure the AC adaptor is connected until completing the first-time use opera­tion. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer. When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed.
5 Open the display.
1 Pull the carrying handle forward. 2 Press the latch as illustrated to release it from the computer. 3 Lift up the latch and open the display.
1
Power Indicator
Power Switch
6 Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indi­cator turns on before releasing it.
CAUTION
Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly. Do not slide the power switch repeatedly. Once the computer is powered off, you must wait at least ten seconds before powering it on again.
11
First-time Operation
7
Setup Windows.
Moving the cursor ( ) or clicking buttons can be performed with the touch pad.
NOTE
Windows XP
CAUTION
Do not press any keys or touch the touch pad until [Windows XP Professional Setup] is displayed.
1 At [Welcome to the Windows XP Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I don’t accept this
Getting Started
agreement], then select [Next].
The touchscreen does not work properly during the Windows setup. During the Windows setup procedure, the desktop will be displayed as a small screen in the center of the LCD. After the setup procedure is completed and the computer is restarted, the desktop will be displayed as a full screen.
NOTE
If [I don’t accept this agreement] is selected, the W indows setup will be aborted.
3
Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date, time and the time zone, then select [Next].
NOTE
It may take two to three minutes until the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
7 At [Networking Settings], select [Typical settings], then select [Next]. 8 At [Workgroup or Computer Domain], select [No, this computer is not on a network,
or is on a network without a domain], then select [Next]. The computer will restart.
NOTE
12
If “Yes, make this computer a member of the following domain” is selected, the
following message may be displayed: [An invalid domain was specified. Would you like to proceed for now and try joining a domain later?]. In this case, select [Yes]. After selecting [Yes], the computer will restart automatically, but some­times the [Starting Windows] message will remain on the screen, and windows will not start up. If this happens, hold Alt down while pressing Tab until [Network Identification Wizard] is displayed on top, and follow the instruc­tions on the screen.
9 Enter your administrator password and select .
Wait until the hard disk drive indicator ( ) has turned off.
NOTE
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes].
Windows 2000
CAUTION
Do not press any keys or touch the touch pad until [Windows 2000 Professional Setup] is displayed.
1 At [Welcome to the Windows 2000 Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I don’t accept this
agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
3 Select settings for your region, then select [Next]. 4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date, time and the time zone, then select [Next].
7 At [Networking Settings], select [Typical settings], then select [Next].
8 At [Workgroup or Computer Domain], select [No, this computer is not on a
network, or is on a network without a domain], then select [Next]. The computer will restart.
9
At [Welcome to the Network Identification Wizard], select [Next].
10
At [Users of This Computer], select [Users must enter a user name and password to use this computer], then select [Next].
11
Select [Finish].
12
Enter your administrator password and select [OK]. Wait until the hard disk drive indicator ( ) has turned off.
Getting Started
8 <Only for models with touchscreen>
Calibrate the touchscreen.
Windows XP
1 Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
2
Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
3 After the calibration procedure is executed (e.g., after the nine “+” marks are touched),
the procedure ends when Enter is pressed.
Windows 2000
1
Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].
2
Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
3 After the calibration procedure is executed (e.g., after the nine “+” marks are touched),
the procedure ends when Enter is pressed.
13
First-time Operation
9 Windows XP
Create a new account.
1 Select [Start] - [Control Panel] - [User Accounts] - [Create a new account]. 2 Follow the instructions on the display to create a user account. 3 Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be oper­ated. You can create a password reset disk beforehand ( below).
NOTE
When creating a new user account:
Getting Started
If you make mail settings, create password reset disks ( below), or conduct other related operations before creating the user account, you will be unable to use any previous mail history or settings. When you create the first new account, you can only select [Computer administra­tor]. Once a “Computer Administrator” account has been created, you can create addi­tional limited user accounts. Note also that only the added user account will be displayed in the W elcome screen. The account for the administrator created during Windows setup will not be dis­played.
NOTE
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.
This concludes the first-time use operation guidelines.
Information for Windows XP
Depending on the Windows settings, installed applications, and drivers, menus and other displays may differ, or some functions (such as use of the password reset disk) may be inoperable.
You can select Classic view for the Control Panel or select the Classic Start menu. Y ou can also change the way a user logs on or off. The procedure in this manual uses the method of the Windows XP default setting (not Clas­sic Start menu etc.).
Resetting the password
Windows XP has a function to reset a forgotten password. To use this function, you need to create a password reset disk beforehand following the steps below.
1 Select [Start] - [Control Panel] - [User Accounts]. 2 Select [Prevent a forgotten password] from the [Related Tasks] menu of the account you
have logged on to and create a password reset disk following the on-screen instructions. Store the password reset disk in a safe place.
• Only the logon password for each account can be reset. The password set in the Setup Utility cannot be reset.
14
Starting Up/Shutting Down
Starting Up
3
2
1
Power Indicator
Power Switch
Latch
1 Open the display .
1 Pull the carrying handle forward. 2 Press the latch as illustrated to release it from the computer.
3 Lift up the latch and open the display.
2 Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.
CAUTION
Under the condition that both the AC adaptor and the port replicator are not con­nected, the power will not go on if the display is closed. While booting, avoid the following until the hard disk drive indicator ( ) has turned off.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen (only for models with touch­screen), or external mouse operations.
• Closing the display.
Once the computer is powered off, you must wait at least ten seconds before pow­ering it on again. When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support.
NOTE
When the power is turned on, sometimes the message “Warming up the system” is displayed or the battery indicator alternately blinks green and orange, and start-up takes longer than usual (a few minutes or more). This function is designed to prevent hard disk drive malfunctions that may occur at low temperatures. Please wait for the computer to start up.
If [Enter Password] is displayed
Enter your password*1 and press Enter . ( “Security Measures”)
The correct password
Enter Password [ ]
1
*
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
Three incorrect attempts
or
No password for about a minute
Will Start
Will Not Start
(Power off)
When an application or file that was previously displayed appears on your screen
The standby or hibernation mode has been set ( “Standby/Hibernation Func­tions”).
Operation
15
Starting Up/Shutting Down
3 Log on to Windows.
Windows XP
After confirming that the hard disk drive indicator ( ) has turned off, select the user and input the password, then select . Until the correct password is entered, the computer will not operate.
Windows 2000
After confirming that the hard disk drive indicator ( ) has turned off, input the user name and password, then select [OK]. Until the correct user name and password are entered, the computer will not operate.
4 Select your application.
You are able to start working on your computer.
NOTE
The power saving function is factory set, so if there is no input from a key, the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hiber-
nation mode ( “Standby/Hibernation Functions”). The computer will re­sume by sliding the power switch.
Windows XP
Operation
When switching to a different user with the Fast User Switching function, it may not be possible to set the settings of the display. In this case, log off all users, and try the operation once more. If the problem persists, restart the computer.
16
Shutting Down (power off your computer)
This procedure is for shutting down the computer without using the standby or hibernation function ( “Standby/Hibernation Functions”).
1 Save important data and close each application. 2 Windows XP
Select [Start] - [Turn Off Computer].
Windows 2000
Select [Start] - [Shut Down].
3 Windows XP
Select [Turn Off].
Windows 2000
Select [Shut down], then select [OK].
Your computer will power off automatically.
Restarting your computer (without shutting down)
Windows XP
Select [Restart].
Windows 2000
Select [Restart], then select [OK].
CAUTION
Do not do the following during the shutdown/restart procedure.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen (only for models with touchscreen), or external mouse operations.
• Closing the display.
NOTE
To shut down using the keyboard,
Windows XP
Press , U , and select [Turn Off] with , then press Enter .
Windows 2000
Press , U , and select [Shut down] with , then press Enter .
To quickly resume computer operation after shutting down,
The standby or hibernation function is available ( “Standby/Hibernation Functions”).
4 Close the display until the latch clicks into place.
Operation
17
Touch Pad (Basic Operation)
Work Surface
Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer operations. For instructions on how to operate, refer to "Touch Pad".
CAUTION
By design the touch pad is to be used with a finger tip only. Therefore, do not use any implement which causes damage on the work surface.
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/ Double-Clicking
Touch Pad Operation
Move the tip of your finger lightly over the surface.
tapping
or
clicking
or
Operation
Dragging
double-tapping
Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface.
or
While holding down the button, moving your finger on the work surface.
double-clicking
Handling the Touch Pad
If a key combination such as Fn + F5 is used while the pad is being touched, the function of the key combination will not work. In addition, it is possible that control of the cursor will be lost and the cursor will not show proper movements. In such cases, the computer has to be restarted by using the keyboard (e.g., ). Do not place any object on the work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pen). Try to avoid having any harmful substances such as oil, come in contact with the touch pad. The cursor may not work properly in such cases.
When the touch pad becomes dirty:
W ipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur­face, e.g., discoloration. In addition, do not use commercially-available household clean­ers and cosmetics, as they may contain components harmful to the surface.
18
Reference Manual
The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals can also be printed.
The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contents included.) Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away from your home or office. It also offers helpful explanations on how to use the touchscreen more effectively. (only for models with touchscreen)
Opening the Reference Manual or Important Tips
Reference Manual
Windows XP
Select [Reference Manual] in [Start].
Windows 2000
Select [Reference Manual] in [Start] - [Programs] - [Panasonic] ­[On-Line Manuals].
Important Tips Select
Important Tips can also be accessed from the following menu.
Windows XP
Select [Important Tips] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals].
Windows 2000
Select [Important Tips] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals].
When the Reference Manual or Important Tips is started up for the first time, the License Agree­ment of the Acrobat Reader may be displayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips. Refer to Acrobat Reader Help to use the Acrobat Reader.
NOTE
Illustrations may be difficult to view depending on the magnification. If the illustra­tion is too small, magnify the display. The characters in PDF files (such as the Reference Manual) may be difficult to read depending on the Acrobat Reader settings and the Windows Desktop settings. In such cases, change the Acrobat Reader settings with the following procedure.
1 Start up Acrobat Reader. 2 Select [Edit] - [Preferences] - [Accessibility], and then set [Color Scheme] to [Use
colors specified in document]. When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size. If a printer is connected, we recommend printing pages. The illustrations and display samples may not print with a high quality.
on the desktop.
Operation
19
Useful Information
Usage Environment
Environment
In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}
Humidity : 30% to 80% RH (No condensation)
Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}
Humidity : 30% to 90% RH (No condensation)
Places not to use your computer
Such areas may result in damage to the computer.
Areas with electronic equipment
These areas may interfere with your display or cause your computer to produce strange sounds.
Areas with extremely high/low temperatures
Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm.
Handling
This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling. Do not drop or hit your computer against solid objects. Do not carry your computer when it is on. Remove all external devices, cables, and PC Cards sticking out of the computer (see the figure on the left) before transporting the computer. We recommend preparing a fully charged battery (and optional charger, if possible). When transporting spare batteries inside a package, briefcase, etc., it is recommended that the batteries be stored in a plastic bag. Do not place the computer upright or allow it to tip over. When the computer receives extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.
Operation
Do not carry the computer while the display is open, or carry it by gripping the display. Do not put anything (e.g., a piece of paper) between the display and keyboard. Always carry your computer with you when traveling. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue. It is a good idea to make backup copies on disks and carry them with you. Do not leave a disk in the drive while transporting your computer.
20
Maintenance
Touch Pad
page 19
Display
<Models with touchscreen>
Use the Soft Cloth included with the computer. (For more information, refer to “Suggestions About Cleaning the LCD Surface” that come with the soft cloth.) If the Protective Film becomes dirty or damaged, it may be time to replace your Protective Film. The Protective Film is a disposable item. To find out the model number of your Protec­tive Film, contact Panasonic Technical Support. (For more information, refer to the “Operating Instructions” that come with the Protective Film.)
CAUTION
Do not touch or use a touchscreen before you re-attach a Protective Film, as you may leave a mark or a scratch on the touchscreen.
<Models without touchscreen>
Avoid using water when cleaning the panel. Ingredients included in water may leave residue and reduce readability of the screen. <When cleaning dust/dirt> Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen. Sweep dust/dirt with fine brush, then wipe it with “dry” soft cloth used for cleaning glasses. <When cleaning oily surface> Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with dry soft cloth used for cleaning glasses.
Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water.
CAUTION
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur­face, e.g., discoloration. In addition, do not use commercially-available household clean­ers and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the com­puter, it may cause it to work improperly or be damaged.
Saving Data on the Hard Disk
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable.
Do not power off your computer while software applications ar e running or hard disk drive indica­tor ( ) is on.
Properly shut Windows* down to avoid problems.
Save all valuable data to floppy disks, etc.
Backing up data to floppy disks, etc. will limit damage should trouble occur to your com­puter or should you inadvertently change or erase data. Use the security function for all important data. ( “Security Measures”)
* Windows XP : This computer uses Microsoft
Windows 2000 : This computer uses Microsoft® Windows® 2000 Professional.
®
Windows® XP Professional.
Operation
Hard Disk Lock
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read and write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee complete protection of data.) ( "Security Measures")
21
Useful Information
Saving Data on Floppy Disks
Do not power down your computer or press the disk eject button while the MP indica­tor ( ) is on.
Doing so may damage the data on the floppy disk and render the floppy disk useless.
Use care when handling floppy disks.
To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your computer, avoid the following:
• Sliding the shutter on the floppy disk manually.
• Exposing the floppy disk to a magnetic field.
Write-protect T ab
Write Enable
Write Disable
• Storing the floppy disk in locations prone to high temperatures, low pitched noise, damp­ness, or dust.
• Applying more than one label on the floppy disk.
Confirm the contents of a floppy disk before formatting it.
Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased.
Use the write-protect tab.
This is a must for preserving important data. This prevents your data from being erased or over-
wr
itten.
Computer Viruses
Operation
When Using Peripheral Devices
Users are advised to purchase the latest versions of virus protection software and use
them regularly.
We recommend you run the software:
• After booting your computer.
• After receiving data. We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
Pay strict attention to the following points to avoid damage to the computer, peripheral de­vices, cables, etc. Also, in addition to following this manual and the Reference Manual, care­fully read the instruction manuals for the peripheral devices being used.
Use only peripheral devices that conform to the computer’s specifications. Connect the devices properly, paying close attention to the condition and position of the connectors. If a connection cannot be made easily, do not apply undue force; check once more to con­firm the condition and position of the connector (alignment of pins, etc.) . If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully.
22
Wireless LAN
To prevent theft of data or unauthorized access to the hard disk via a wireless LAN.
If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption.
Windows Update
You can use the latest patches and service packs for Windows with the following menus.
Do not apply "Driver Update" even if a message to update a driver appears. If a driver update is required, contact to Panasonic Technical Support.
Windows XP
[Start] - [All programs] - [Windows Update]
Windows 2000
[Start] - [Windows Update]
When Changing Hard Disk Partitions
When using the hard disk backup function ( page 34), do not divide up the hard disk before creating a backup region. If you do this, the backup region cannot be created. Divide into the partition when the backup region is created.
When Disposing of or Transferring Ownership of This Device
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility (included) ( page 38). (Note that this hard disk data erase utility does not guar­antee that data will be completely erased.)
Also, note that if you transfer ownership of this device without deleting commercial soft­ware that you have installed to the hard disk, you may be in violation of the licensing agreement for that software.
Operation
23
Loading...
+ 53 hidden pages