|
Personal Computer |
|||
|
OPERATING INSTRUCTIONS |
|||
|
Model No. CF-18 Series |
|||
|
Contents |
|
|
|
|
Getting Started |
|
|
|
|
Read Me First.................................................. |
|
|
3 |
|
First-time Operation ........................................ |
|
|
9 |
2000 XP |
Reference Manual |
|
||
|
• Read Me First |
• |
LED Indicators |
|
|
• Key Combinations |
|
|
|
|
Operation |
|
|
|
|
Starting Up/Shutting Down ............................ |
15 |
||
|
Touch Pad (Basic Operation) ............................. |
19 |
||
|
Touchscreen (Basic Operation).......................... |
20 |
||
|
Operating in Tablet Mode .............................. |
21 |
||
|
Reference Manual ......................................... |
|
|
23 |
|
Reference Manual |
|
||
|
• Tablet Buttons |
• |
PC Cards |
|
|
• TouchPad(Advanced) |
• |
RAM Module |
|
|
• Touchscreen(Advanced) |
• |
Port Replicator |
|
|
• Software keyboard |
• |
External Display |
|
|
• PanasonicHandWriting |
• |
USB Devices |
|
|
• Display Rotation |
• |
Modem |
|
|
• Standby/Hibernation |
• |
LAN |
|
|
Functions |
• |
Wireless LAN |
|
|
• Security Measures |
• |
Hard Disk Drive |
|
|
• Computing on the Road |
• |
Setup Utility |
|
|
• Battery Power |
|
|
|
Getting Started
Operation
[Additional Manual]
Reference Manual
This manual can be accessed on your computer. Refer to page 23 on how to access the Reference Manual.
Troubleshooting |
|
|
List of Error Codes ......................................... |
|
24 |
Dealing with Problems (Summary)................... |
25 |
|
Reinstalling Software |
.................................... |
30 |
Reference Manual |
|
|
• Technical Information |
• List of Error Codes |
|
• DMI Viewer |
• Dealing with Problems |
|
|
(Advanced) |
|
Appendix |
|
|
LIMITED USE LICENSE AGREEMENT........ |
32 |
|
Hard Disk Data Erase Utility.......................... |
34 |
|
Names and Functions of Parts ...................... |
35 |
|
Specifications ................................................ |
|
39 |
LIMITED WARRANTY ................................... |
41 |
Please read these instructions carefully before using this product and save this manual for future use.
Troubleshooting
Appendix
|
|
|
|
|
|
|
|
Customer's Record |
|||
|
Model No.* |
|
|
Dealer's Name |
|
|
|
|
|
|
|
|
Serial No. |
|
|
|
|
|
|
|
|
|
|
or |
|
|
|
|
|
|
Code No. |
|
|
Dealer's Address |
|
|
|
|
|
|
|
Getting Started
Date of Purchase
*For the Model No., insert the 12 digit number (for example, CF-18BHAZXDM) located on the bottom of the computer.
Introduction
Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer.
Illustrations and Terminology in this Manual
NOTE: |
|
|
NOTE provides a useful fact or helpful information. |
||
CAUTION: |
|
CAUTION indicates a condition that may result in minor or moderate injury. |
|||
WARNING: |
|
WARNING indicates a hazard that may result in moderate or serious injury. |
|||
Windows 2000 : |
Information for Microsoft® Windows® 2000 Professional users. “Windows” or “Windows 2000” |
||||
Windows XP |
|
in this manual. |
|||
: |
Information for Microsoft® Windows® XP Professional users. “Windows” or “Windows XP” in |
||||
|
|
|
|
|
this manual. |
Enter |
: |
|
This illustration means to press the [Enter] key. |
||
Fn + |
F5 |
: |
This illustration means to press and hold the [Fn] key, then press the [F5] key. |
||
[Start]-[Run]: |
|
This illustration means to click [Start], then to click [Run]. |
|||
|
|
|
|
|
(For some applications, you may need to double-click.) |
|
|
: |
|
|
Where to go for referred information. |
|
|
|
: This illustration means to refer to the Reference Manual, which is available on your computer. Refer to page 23 on how to access this manual.
Windows 2000 screens are used in this manual when no specific OS (operating system) notes are required.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand.
In this manual, descriptions are given using illustrations not featuring the hand strap for convenience of explanation.
If the user has logged on without administrator authority, some functions may not be executable, and some screens may be not displayed as shown in this manual. If this happens, log on with Administrator authority to enable these functions.
Confirm the latest information on optional products in catalogs, etc.
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein. ©2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals.
Trademarks
Microsoft® and Windows® are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Pentium, PROSet and SpeedStep™ are either registered trademarks or trademarks of Intel Corporation.
Adobe® and Acrobat® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.
2
Read Me First
For U.S.A.
Federal Communications Commission Radio
Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the Panasonic Service Center or an experienced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RF Exposure Warning:
This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and minimum 2.5 cm spacing must be provided between antenna and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP-5 (1-800-527-8675)
FCC Regulation Notice for modem
This equipment contains a FCC approved modem.
Manufacturer of modem: AMBIT Microsystems Corporation Model No. T60M283.** (** = numbers or alphabet letters)
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
1.This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the telephone company.
2.An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.
3.The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
4.If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
5.The telephone company may take changes in it’s facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
6.If trouble is experienced with this equipment, for repair or warranty information, please contact Matsushita Electric Corporation of America at DIAL TOLL FREE 1-800-LAP- TOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
7.There are no user serviceable parts contained in this equipment.
8.This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
9.The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used.
Getting Started
3
Read Me First
10.According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem.
“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.”
“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure.”
Notice for the products using LCD
This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>
Getting Started
For Canada
Industry Canada (IC) Notice for modem
This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit.
EQUIPMENT ATTACHMENT LIMITATIONS
“NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.”
“NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.”
REN: See bottom of the computer
Industry Canada
This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;
(1)this device may not cause interference, and
(2)this device must accept any interference, including interference that may cause undesired operation of the device.
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATÉRIEL
“AVIS: L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être coordonnées par un représentant désigné par le fournisseur. L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de réparations ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales. Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un service d’inspection des installations électriques, ou à un électricien, selon le cas.”
“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La terminaison d’une interface téléphonique peut consister en une combinaison de quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de touts les dispositifs n’excède pas 5.”
IES: Voir sous le fond de l’ordinateur
4
Important Safety Instructions / Importantes Mesures De Sécurité
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3.Do not use the telephone to report a gas leak in the vicinity of the leak.
4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Precautions
The CF-18 was developed based on thorough research into the real-world portable computing environments. Exhaustive pursuit of usability and reliability under harsh conditions led to innovations such has the magnesium alloy exterior, vibration damped hard disk drive and floppy disk drive, flexible internal connections. The CF-18’s outstanding engineering has been tested using the stiff MIL-STD- 810F (for vibration and shock) and IP (for dust and water) based procedures.
As with any portable computer device precautions should be taken to avoid any damage. The following usage and handling procedures are recommended.
Before putting the computer away, be sure to wipe off any moisture.
Avoid Radio Frequency Interference
Do not place the computer near a television or radio receiver.
Avoid Magnetic Fields
Keep the computer away from magnets. Data stored on the hard disk may be lost.
Keep Small Objects Away
Do not insert paper clips or other small objects into the computer.
Do Not Disassemble the Computer
Do not attempt to disassemble your computer.
Avoid Excessive Force on the Display
Do not apply excessive downward force on the display when it is completely opened, especially when plugs and/or cables are connected to the rear of the computer.
Avoid low-temperature burns
Avoid more than casual contact with any heat producing area of the notebook computer, power adaptor, and any option or accessory you use with it. Even low heat, if warmer than body temperature, can cause a burn, if the skin is exposed to the heat source for a long enough period of time.
Certaines mesures de sécurité doivent être prises pendant l’utilisation de matérial téléphonique afin de réduire les risques d’incendie, de choc électrique et de blessures. En voici quelquesunes:
1.Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à laver, dans un sous-sol humide ou près d’une piscine.
2.Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans fil) pendant un orage électrique. Ceci peut présenter un risque de choc électrique causé par la foudre.
3.Ne pas utiliser l’appareil téléphonique pour signaler une fuite de gaz s’il est situé près de la fuite.
4.Utiliser seulement le cordon d’alimentation et le type de piles indiqués dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux règlements pertinents quant à l’élimination des piles.
CONSERVER CES INSTRUCTIONS
Information to the User
This product and your Health
This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.
5
Getting Started
Read Me First
Getting Started
Lithium Battery
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel.
Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données comme la date et l’heure notamment. Elle ne devra être remplacée que par un technicien qualifié.
Avertissement! Risque d’explosion en cas de non respect de cette mise en garde!
Precautions ( Battery Pack )
Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage.
Avoid Heat
Do not throw the battery pack into a fire or expose it to excessive heat.
Keep Articles Away
Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing.
Do Not Disassemble
Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it.
Do Not Short
Do not short the positive (+) and negative (-) contacts.
Avoid Extreme Heat, Cold and Direct Sunlight
Do not charge, use or leave the battery pack for extended periods where it will be exposed to direct sunlight, in a hot place (in car on a sunny day, for example), or in a cold place.
Do Not Use With Any Other Computer
The battery pack is rechargeable and was intended for the specified computer or charger. Do not use it with a computer other than the one for which it was designed.
Do Not Put into a Microwave
Do not put the battery pack into a microwave oven or a pressurized chamber.
Stop Using
Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, remove it from the computer or charger and stop using it.
Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.
Do not expose the battery pack to water, or allow it to become wet.
If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.
This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity.
The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible.
NOTE
The battery pack may become warm during recharging or normal use. This is completely normal.
Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 °C to 50 °C {32°F to 122 °F})
“Battery Power”. Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or less.)
If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range.
This computer has a high temperature mode function that prevents the degradation of the battery in high temperature environments. (
“Battery Power”) If the high temperature mode is enabled in the Setup Utility (
“Setup Utility”), a level of 100% in the [High Temperature] mode is about a level of 80% in the [Normal Temperature] mode.
The battery pack is a consumable item. If the amount of time the computer can be run off a particular battery pack becomes dramatically shorter and repeated rechargings do not restore its performance, the battery pack should be replaced with a new one.
When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.
6
When Using Peripheral Devices
Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc. Also, in addition to following this manual and the Reference Manual, carefully read the operating instructions for the peripheral devices being used.
Use only peripheral devices that conform to the computer’s specifications.
Connect the devices properly, paying close attention to the condition and position of the connectors.
If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc.) .
If the connector has holding screws, fasten the screws firmly.
Do not carry the computer with cables attached, and do not pull on the cables forcefully.
Saving Data on the Hard Disk
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable.
Do not power down your computer while software applications are running or hard disk drive indicator ( ) is on.
Properly shut Windows down to avoid problems.
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or should you inad-
vertently change or erase data. |
|
Use the security function for all important data. ( |
“Security Measures”) |
Hard Disk Lock
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read/write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee the complete protection of data.) ( “Security Measures”)
Computer Viruses
Users are advised to purchase the latest versions of virus protection software and use them regularly.
We recommend you run the software:
•When booting your computer.
•After receiving data.
We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check).
When Disposing of or Transferring Ownership of This Device
When disposing of or transferring ownership of this device, completely erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility (included) ( page 34). (Note that this hard disk data erase utility does not guarantee that data will be completely erased.)
Also note that transferring ownership of this device without deleting software from the hard disk may violate software user’s licenses.
Usage Environment
Environment
In use: |
Temperature: 5 °C to 35 °C {41 °F to 95 °F} |
||
|
Humidity: |
30% to 80% |
RH (No condensation) |
Not in use: |
Temperature: -20 °C to 60 |
°C {-4 °F to 140 °F} |
|
|
Humidity: |
30% to 90% |
RH (No condensation) |
(To next page)
Getting Started
7
Read Me First
Getting Started
NOTE
Only use the computer within the allowable temperature range.
When the computer is left powered on in a low temperature environment, set [Turn off hard disks] to [Never] in the following menu to avoid damage to the hard disk drive.
Windows 2000
[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]
Windows XP
[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
Places not to use your computer
Such areas may result in damage to the computer.
Areas with electronic equipment
These areas may interfere with your display or cause your computer to produce strange sounds.
Areas with extremely high/low temperatures
Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm.
Handling
This computer has been designed so as to minimize shock to the LCD and hard disk drive, etc.,
but no warranty is provided against such trouble. Therefore, as a precision instrument, be
extremely careful in the handling.
Do not drop or hit your computer against solid objects.
Do not carry your computer when it is on.
Remove all external devices and cables, and PC Cards sticking out of the computer (see the
figure on the left) before transporting the computer.
We recommend preparing a fully charged battery.
When transporting spare batteries inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
Do not place the computer upright or allow it to tip over. When the computer receives extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.
Do not carry the computer while the display is open, or carry it by gripping the display.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
Always carry your computer with you. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue.
It is a good idea to make backup copies on disks and carry them with you.
Maintenance
Touch Pad
page 19
8
Display
Use the Soft Cloth included with the computer. (For more information, refer to “Suggestions About Cleaning the LCD Surface” that comes with the Soft Cloth.)
If the Protective Film becomes dirty or damaged, it may be time to replace your Protective Film. The Protective Film is a disposable item. To find out the model number of your Protective Film, contact Panasonic Technical Support. (For more information, refer to the “Operating Instructions” that come with the Protective Film.)
CAUTION
Do not touch the screen before you re-attach a Protective Film, as you may leave a mark or a scratch on the screen.
Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water.
CAUTION
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it to work improperly or be damaged.
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations.
1 Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these items are missing or are not working properly, contact Panasonic Technical Support.
AC adaptor ..........1 |
AC Cord ...............1 |
Battery Pack........1 |
|
||||
Model No : CF-AA1623A |
|
|
Model No :CF-VZSU30 |
Started |
|||
Modem Telephone |
Soft Cloth ...............1 |
Stylus .....................1 |
|||||
Cable ...................... 1 |
|||||||
|
|
|
|
||||
|
|
|
|
|
|
||
|
|
|
( |
“Touchscreen(Advanced)”) |
Getting |
||
|
|
|
|
|
|
||
Tether ......................1 |
Shoulder Strap........1 |
Operating Instructions |
|
||||
|
|
|
|
(This book).................... 1 |
|
||
|
|
|
|
Windows® Book .... 1 |
|
||
|
|
|
|
Product Recovery CD-ROM |
|
||
|
|
|
|
Windows 2000 |
.........2 |
|
|
( |
page 38) |
( |
page 36) |
Windows XP |
............3 |
|
2 Read the LIMITED USE LICENSE AGREEMENT. ( page 32)
|
Before removing the seal covering the power switch, read the LIMITED USE LICENSE |
Latch |
AGREEMENT. |
|
1
2
Cover
4
3
3 Insert the battery pack.
1 Unlock the cover by sliding the latch to the right.
2 Slide the latch down, and then without releasing it, open the cover as illustrated.
3 Slide the battery pack inward until it is firmly in place.
CAUTION
Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly.
Be sure to insert the battery pack as illustrated.
4 Close the cover, then lock it by sliding the latch to the left.
CAUTION
Confirm that the latch lock is correctly in place. If you carry your computer without the latch lock in place, the battery pack may fall out.
Before using the battery pack, carefully read “Precautions (Battery Pack)” (
page 6).
9
Getting Started
First-time Operation
DC-IN Jack |
4 Connect your computer to a power outlet. |
DC IN 16.0 V
CAUTION
Be sure the AC adaptor is connected until completing the first-time use operation.
When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone.
Latch B |
5 Open the display. |
|
2 |
||
|
||
|
1 Pull up on the latch A and release the latch B. |
|
1 |
2 Lift open the display. |
|
|
||
Latch A |
|
|
Power Switch |
6 Turn your computer on. |
Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.
CAUTION
Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly.
Do not slide the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.
Power Indicator
7 Setup Windows.
Moving the cursor ( ) or clicking buttons can be performed with the touch pad (
page 19).
Windows 2000
CAUTION
Do not press any keys or touch the touch pad until [Windows 2000 Professional Setup] is displayed.
Do not use the touchscreen during the Windows setup.
1 At [Welcome to the Windows 2000 Setup Wizard], select [Next].
2After reading the agreement, select [I accept this agreement] or [I don’t accept this agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
10
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date, time and time zone, then select [Next].
7 At [Networking Settings], select [Typical settings], then select [Next].
8At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next].
The computer will restart.
9 At [Welcome to the Network Identification Wizard], select [Next].
10At [Users of This Computer], select [Users must enter a user name and password to use this computer], then select [Next].
11Select [Finish].
12Enter your administrator password and select [OK].
Windows XP
CAUTION
Do not press any keys or touch the touch pad until [Windows XP Professional Setup] is displayed.
Do not use the touchscreen during the Windows setup.
1 At [Welcome to the Windows XP Setup Wizard], select [Next].
2After reading the agreement, select [I accept this agreement] or [I don’t accept this agreement], then select [Next].
NOTE
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated.
6 Enter the correct date, time and time zone, then select [Next].
NOTE
It may take two to three minutes until the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
7 At [Networking Settings], select [Typical settings], then select [Next].
8At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next].
The computer will restart.
Getting Started
11
First-time Operation
Getting Started
NOTE
If “Yes, make this computer a member of the following domain” is selected, the following message may be displayed: [An invalid domain was specified. Would you like to proceed for now and try joining a domain later?]. In this case, select [Yes]. After selecting [Yes], the computer will restart automatically, but sometimes the [Starting Windows] message will remain on the screen, and windows will not start up. If this happens, hold Tab down while pressing Alt until [Network Identification Wizard] is displayed on top, and follow the instructions on the screen.
9 Enter your administrator password and select .
NOTE
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes].
8 Calibrate the touchscreen.
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration]. 2 Touch the “+” mark on the calibration screen with the stylus (included) for about one second. 3 After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed. 4 Select [OK].
Windows XP
1Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] - [TouchScreen] - [Calibration].
2 Touch the “+” mark on the calibration screen with the stylus (included) for about one second. 3 After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed. 4 Select [OK].
9Windows XP
Create a new account.
1 Select [Start] - [Control Panel] - [User Accounts] - [Create a new account]. 2 Enter a name for the new account, then select [Next].
3 Select [Computer administrator], then select [Create Account].
4<When you want to create a password for the new account>
Select the new account you have created and select [Create a password]. Follow the instructions on the screen to create a password.
5 Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be operated. You can create a password reset disk beforehand ( page 14).
12
NOTE
When creating a new user account:
•If you make mail settings, create password reset disks ( page 14), or conduct other related operations before creating the user account, you will be unable to use any previous mail history or settings.
•When you create the first new account, you can only select [Computer administrator].
Once a “Computer Administrator” account has been created, you can create additional limited user accounts.
Note also that only the added user account will be displayed in the Welcome screen. The account for the administrator created during Windows setup will not be displayed.
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless LAN”.
Create BACKUP Disks for Reinstallation
To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and formatted 2HD floppy disks are needed.
1 Connect the USB floppy disk drive to your computer.
NOTE
The floppy disk drive must be the A drive.
2Prepare 2HD floppy disks and make sure they are not in the write-protected state, and then set it.
3Windows 2000
Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the on-screen instructions.
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [Create Backup Disk] and follow the on-screen instructions.
4 Place a label identifying the contents on each disk.
USB
Floppy
Label on the top surface, and insert the shutter-side headfirst.
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the disk by following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your computer to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is displayed, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, power off the computer or use the standby or hibernation function (
“Standby/Hibernation Functions”).
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its original state. In this case, contact Panasonic Technical Support.
This concludes the first-time use operation guidelines.
Getting Started
13
First-time Operation
Getting Started
Information for Windows XP
Depending on the Windows settings, installed applications, and drivers, menus and other displays may differ, or some functions (such as use of the password reset disk) may be inoperable.
You can select Classic view for the Control Panel or select the Classic Start menu. You can also change the way a user logs on or off.
The procedure in this manual uses the method of the Windows XP default setting (not Classic Start menu etc.).
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following the steps below.
1 Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer.
2Select [Start] - [Control Panel] - [User Accounts] and select the account you used to logon.
3Select [Prevent a forgotten password] from the [Related Tasks] menu of the account you have logged on to and create a password reset disk following the onscreen instructions.
Store the password reset disk in a safe place.
·Only the logon password for each account can be reset. The password set in the Setup Utility cannot be reset.
14
Starting Up/Shutting Down
Starting Up
Latch B
2
1
Latch A Power Switch
Power indicator
1 Open the display.
1 Pull up on the latch A and release the latch B. 2 Lift open the display.
2 Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.
CAUTION
While booting, avoid the following until the hard disk drive indicator ( ) has turned off.
•Connecting or disconnecting the AC adaptor.
•Touching the power switch or the tablet buttons.
•Performing any keyboard, touch pad, touchscreen (or external mouse) operations.
•Closing the display.
Once the computer is powered off, you must wait at least ten seconds before powering it on again.
When using this computer with the battery pack only, it may take some time for the power to turn on after sliding the power switch. In this case, slide the power switch and hold it for more than one second. This phenomenon occurs because the standby power is minimized while the power is turned off; it is not a malfunction.
When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
NOTE
When the power is turned on, sometimes the message “Warming up the system” is displayed or the battery indicator alternately blinks green and orange, and start-up takes longer than usual (a few minutes or more). This function is designed to prevent hard disk drive malfunctions that may occur at low temperatures. Wait for the computer to start up.
Operation
15