Order Taker Unit
Operating Instructions
Model No. WX-CT2020
A
B
WX-
CT2020
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
CONTENTS |
|
INTRODUCTION ....................................................................................................................................... |
3 |
FEATURES ................................................................................................................................................ |
3 |
PRECAUTIONS ......................................................................................................................................... |
3 |
NAMES & FUNCTIONS .............................................................................................................................. |
4 |
BATTERY LOADING & REPLACEMENT ................................................................................................... |
6 |
● Loading .............................................................................................................................................. |
6 |
● Replacement ...................................................................................................................................... |
6 |
SETUP PROCEDURES .............................................................................................................................. |
6 |
● Opening the Switch Pocket ................................................................................................................ |
6 |
● Turning the Power On/Off ................................................................................................................... |
6 |
● Channel Group Selection ................................................................................................................... |
7 |
● DIP Switch Setup ................................................................................................................................ |
7 |
● Operation Mode Setup ....................................................................................................................... |
8 |
OPERATING PROCEDURES ..................................................................................................................... |
10 |
● Communications with Customers (TALK) ........................................................................................... |
10 |
● Communications with Other Store Personnel (PAGE) ........................................................................ |
10 |
WHEN DISCONNECTING THE HEADSET PLUG ...................................................................................... |
11 |
TROUBLESHOOTING ................................................................................................................................ |
12 |
SPECIFICATIONS ...................................................................................................................................... |
13 |
STANDARD ACCESSORIES ..................................................................................................................... |
13 |
OPTIONAL ACCESSORIES ....................................................................................................................... |
13 |
INTRODUCTION
Panasonic WX-CT2020 Order Taker Unit is designed for the use in Panasonic Wireless Communication System. Using with WX-C1027A Headset (option), you can communicate by voice with other store personnel and the customer.
FEATURES
•Compatible center modules: WX-C1010, WX-C1011, and WX-CC2010 (Refer to "SW#8" on p. 7 "DIP Switch Setup".)
•Noise and interference reduction by use of UHF band
•Facilitated frequency setting by use of phase lock loop (PLL)
•A/B channel selection available for double drive-through
•Talk mode selectable between Talk Lock and Talk PTT (Refer to p. 8 "Operation Mode Setup".)
•Page mode selectable between Page Lock and Page PTT (Refer to p. 8 "Operation Mode Setup".)
PRECAUTIONS
•All setup procedures of this product should be performed by qualified service personnel or system installers.
•Use only Panasonic authorized batteries like the rechargeable Ni-MH 3.6 V.
•Follow the battery care and handling instructions.
•Read the instructions included with the battery charger.
•Charge the battery when the power indicator lights up in red and a beep is heard in the headset. Fully charge the battery. Failure to do so may shorten the operating time.
3
NAMES & FUNCTIONS
q |
w |
e |
r t |
|
EJECT |
|
A |
|
|
y |
|
|
|
|
B |
WX-CT2020
u
VOL PWR
i
o !0
!1 |
|
|
|
|
q |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
!2
4