Installation Manual
This PCB assy with is to be installed only by the professionals and used only with a Car
Audio produced by Panasonic Co., Ltd. When this PCB assy with Bluetooth for car audio is
installed in the Car Audio, we shall consider the following points;
1. Since
Model “YEAP01A727”, “YEAP01B897” owns its FCC ID Number / IC Number,
we shall affix an exterior label on the outside of the product if the FCC ID Number
and IC Number are not visible. The exterior label shall use wording such as
either ”Contained Transmitter Module FCC ID:
ACJ932YEAP01A727” , “Contained
Transmitter Module IC: 216J-YEAP01A727” or “Contained FCC ID:
ACJ932YEAP01A727”, “Contained IC: 216J- YEAP01A727”
“YEAP01A727”, “YEAP01B897”, complies with requirements of sub-sections
2.
15.19(a)(3) in FCC Rules Part 15 Subpart C. The manual statement (15.19 (a)(3) is
included User Guide of the product.
“YEAP01A727”, “YEAP01B897”, is to be installed only by the professional line operator
3.
as shown in following pictures. (Fig 1 and 2)
Fig 1. Rear side of
“YEAP01A727”, “YEAP01B897”
Bluetooth IC Bluetooth Antenna
Connecter
Fig 2. Top view of
“YEAP01A727”, “YEAP01B897” be equipped for a Car Audio (example)
Fig 3. Top view of
“YEAP01A727”, “YEAP01B897” be equipped for a Car Audio (example)