Installation Manual
This PCB assy with is to be installed only by the professionals and used only with a Car Audio produced by
Panasonic Co., Ltd. When this PCB assy with Bluetooth for car audio is installed in the Car Audio, we shall consider the following points;
1.Since Model “YEAP01A466” owns its FCC ID Number / IC Number,
we shall affix an exterior label on the outside of the product if the FCC ID Number and IC Number are not visible. The exterior label shall use wording such as either ”Contained Transmitter Module FCC ID: ACJ932YEAP01A466” , “Contained Transmitter Module IC: 216J-YEAP01A466” or “Contained FCC ID: ACJ932YEAP01A466”, “Contained IC: 216JYEAP01A466”
2.“YEAP01A446” complies with requirements of sub-sections
15.19(a)(3) in FCC Rules Part 15 Subpart C. The manual statement (15.19 (a)(3) is included User Guide of the product.
3.“YEAP01A446” is to be installed only by the professional line operator as shown in following pictures. (Fig 1 and 2)
Fig 1. Rear side of “YEAP01A466”
Bluetooth Module |
Bluetooth Antenna |
|
Connecter |
Fig 2. Top view of “YEAP01A466” be equipped for a Car Audio (example)
Fig 3. Top view of “YEAP01A466” be equipped for a Car Audio (example)