Panasonic 650EX, 850 User Manual

Matrix System650EX

Key Features of The Expanded System

Basic Features

• Up to 512 inputs and 64 outputs.

• All inputs support multiplexed video, control data and VD2 sync over
the coaxial cable, and cable compensation up to 900 m (3,000 feet).

• Up to 512 RS-485 remote controlled cameras.

• Supports simultaneous use of 64 controllers including the
WV-CU950 System Controllers and Personal Computers
using ActiveX control interface.

Alarm Functions

• Up to 1,024 alarm programs and various alarm interfaces including 1,024 terminal
inputs, 256 terminal outputs, 512 camera alarms, 512 Video loss alarms and
1,024 serial alarm inputs (Total of terminal inputs and outputs is 1,024).

• Up to ten actions including Camera spot, Tour Sequence, Group Sequence and
Text for each alarm event. Each action can be assigned to one of the 16 targets,
which includes up to 64 monitors.

• Alarms can be scheduled by programming the timer event function.

• Alarm priority control enables effective management for alarms,
timer events and operators.

General Functions

• Three sequencing features: Tour Sequence; 128 patterns, 64 steps,
Group Preset; 128 patterns, 64 monitors, Group Sequence; 128 patterns, 64 steps.

• Up to 1,024 Timer events including Camera Spot, Tour Sequence, Group Preset,
Group Sequence, Alarm and Mode change.

• Full camera control including 255 preset position call, Menu setup, Color/Black &
White Change, Wiper, Defroster and 256 function codes (depending on the camera
model). Preset positions can easily be programmed by the system controller.

• Up to 512 operators with individual level and priority settings,
and flexible system partitioning.

• Up to 32 recorders (WJ-HD316/309A, WJ-RT416) can be connected.

* Connection with WJ-RT416 is a plan for future.

• Cameras, matrix and recorders can be controlled seamlessly from
the system controller.

• It will support a redundant CPU system without need of
WJ-MPS850 CPU management switch unit, enabling lower cost.

• Front access for Main Board and Power Supply maintenance.

OSD Service

• Alarm Status, Alarm History (100 events), Video Loss Status, Video Loss History
(100 events) and System Status can be viewed on a monitor.

• Time & Date Displays can be switched on and off from the system controller.

Key Features of The Satellite System

• Multiple System650EX systems with WJ-MPU955A
central processing unit upgraded by WJ-ASC960,

can be linked by video link and Network.

• Up to of 64 domains.

• Up to 1,024 video links across the domains.

• Up to 512 global operators (total of global and local operators)
and 1,024 global alarms.

• Four global operator classes by combination of Global camera lock
and Global camera lock override privileges.

• System650EX, System850 and GX matrix system can be incorporated
to make a hybrid satellite system.

• Integrated Global and Local administration software makes setup easy.

Matrix System 650EX. Enhancing Large-System Surveillance.

Up to 512 cameras and 64 monitors, plus up to 64-domain Satellite capability

The new Panasonic Matrix System650EX redefines "advanced" in large-system surveillance.

This new EXpanded edition of the world-renowned System650 adds the new WJ-MPU955A

Main CPU, for flexible, fully integrated control of up to 512 cameras and 64 monitors.

Plus, our new WJ-ASC960 software upgrade makes the configuration of systems with up to 64

Satellite domains possible. For anyone needing to construct large scale systems to suit a wider

range of applications such as casinos, airports, transport terminals, banks, shopping complexes,

prisons, or other government facilities, the smarter answer is clear. Matrix System650EX

2 3

Main Menu Cameras Setup Menu Recorders Setup Menu

Alarm Targets Setup Menu Event Scheduler Setup Menu

Matrix System650EX Administration Software

The standard software for basic (up to 512 x 64) system.

Up to 64

Up to 512

Up to 512

Up to 64

Up to 64 domains

Control via IP Network

Up to 512

Up to 64

Up to 512

Up to 64

Main Menu Video Link Setup Menu

WJ-ASC960 Upgrade Software for Satellite Configuration

This optional software upgrade allows configuration of systems with up to 64 Satellite domains.

A Rich Array of Features for More Reliable and Efficient Surveillance

Three Sequencing Features for More Efficient Monitoring

These features allow you to determine the sequence in which you seem images from multiple cameras.
System Controller buttons make monitoring more efficient by enabling instant selection of the pattern of your choice.

Tour Sequence

Automatically switches camera images sequentially on the selected
monitor. Up to 128 patterns can be programmed with as many as 64
steps per pattern. Camera preset position (1 ~ 255) and AUX output (1,

2) can also be controlled and up to 86,339 seconds dwell time is
available in each step.

Group Preset

Allows instant spot display of selected camera with preset position (1 ~

255) on up to 64 pre-selected monitors at once. Up to 128 patterns can
be programmed.

step 1

Tour 1

C1

Tour 2

C5

Tour 3

C9

Tour 128

C13

step 2

C2

C6

C10

C14

step 3

C3

C7

C11

C15

step 64

C16

C4

C8

C12

The image shifts automatically from one camera to another, as programmed.

The images can be
seen on any monitor.

M1 M64

Alarm ID Priority

Alarm Source Alarm Output

Action

No. Type ID Preset AUX

Dwell Time

Text Target
0Camera spot 1 1 1 3sec Entrance 1 Zoom 1 (M1, M2)
1Camera spot 2 – OFF 5sec Entrance 1 Wide 1 (M1, M2)

256 1 Terminal 513 2 Tour SEQ 1 – – 3sec Entrance Area 2 (M11, M12)

8Group SEQ 1 – – 4 sec Group level 1

3 (M31, M32, M33,M34)

9 Text only – – – –

Entrance 1 Level 1 16 (M63, M64)

Alarm Output 513

Action 0

Camera 1
Tar get 1 M1

Action 1

Camera 2
Tar get 1 M2

Action 2

Tour SEQ1
Tar get 2 M11

C1

M11 M11 M11

Action 8

Group SEQ1
Tar get 3 M31, 32, 33, 34

Action 9

Text
Tar get 16 M63

Entrance 1
Level 1

Camera 1

Camera 2

Preset Position 1

(Zoom in to Entrance 1)

Ter m inal
Alarm 256

Example: Terminal Alarm Event No.256

Sensor
System

Entrance 1

Infrared

Sensor

WJ-SX650

ZOOM

Sensor

C2 C3

C1

M31

C20

M32C5M33

C15

M34

The Matrix System650EX supports flexible alarm handling, up to 1,024 alarm programs and various alarm interfaces including
1,024 terminal inputs, 256 terminal outputs, 512 camera alarms, 512 Video loss alarms and 1,024 serial alarm inputs (Total of terminal
inputs and outputs is 1,024). An alarm program can activate up to 10 actions including camera spot, Tour Sequence, Group Sequence
and Text. Each action can be assigned to one of the 16 targets, which includes up to 64 monitors, so that the multiple actions can
effectively be displayed across the alarm target monitors.
An alarm terminal output can be triggered when an alarm is activated, acknowledged or reset.

Group Sequence 1

Monitor 1

step 64

step 1

C1

Group Sequence 2

Group Sequence 128

Monitor 2

C20

Monitor 3

C5

Monitor 64

C15

Group Sequence

Automatically switches Group preset patterns sequentially. Up to 128
patterns can be programmed with as many as 64 steps per pattern.
Up to 86,339 seconds dwell time is available in each step.

Group Preset 1

Monitor 1 Monitor 2 Monitor 3 Monitor 64

Group Preset 2

Group Preset 128

C1 C20 C5 C15

• Alarms can be scheduled by programming the timer
event function.

• Alarm priority control enables effective management
for alarms, timer events and operators.

• Up to 1,024 Alarm Program status, up to 100 events
of Alarm History and up to 100 events of Video-loss
History can be viewed on a monitor.

• Up to 30 days of Alarm logs can be stored in the main
CPU unit.

• Alarms can be suspended individually by Arm/Disarm
button from the system controller.

• Hold mode displays first alarm while sequence mode
displays multiple alarms sequentially when multiple
alarms are activated.

Up to 512 operators can be registered with individual operator IDs, passwords and priority (0 to 65,534). 16 operator levels are fully
configurable with numerous parameters such as camera select, alarm select and DVR select.
Administrators for the system setup are registered separately, allowing secure user management.

The System650EX has flexible system partitioning and priority features allowing for advanced operation management.
Partitioning includes Controller to Area, Monitor, Camera view, Camera control, Group Sequence, Alarm, Alarm I/O, Recorder,
Operator-to-Controller and Monitor-to-Camera. Priority control includes Operator, Controller, Alarm and Timer-event so that the flexible
priority control is available. For example, a higher operator will not be bothered by the lower priority alarms or timer events and higher
priority alarms will not be disturbed by the lower priority operators or timer events. In addition, the System650EX can create the Areas
including Monitors, Controllers, Tour Sequences, Group Presets and Group Sequences. All these items, except controllers, can have a
local number enabling the operators to select them by using a simpler reference number.

4 5

Event ID Priority Action ID Monitor Start Date Start Time End Date End Time Repeat

15Alarm Disarm – – 11 Nov. 2006 08:00 – – Daily

25Alarm Arm – – 11 Nov. 2006 17:00 – – Daily

310Camera spot 1 1 11 Nov. 2006 08:00 31 Jan. 2007 17:00 Weekly

1,024 20 Tour SEQ 3 4 1 Dec. 2006 09:00 1 Dec. 2006 18:00 Once

•

•

•

MAJOR FUNCTIONS

Up to 1,024 Alarm Events Ensure That You Capture Vital Scenes

Flexible System Partitioning and Priority

User Management for Preventing Unauthorized Access

Camera spot, Tour Sequence, Group Preset,
Group Sequence, Alarm arm/disarm and Mode
change features can automatically be activated,
following programmed schedules. Up to 1,024
timer events can be registered.

Timer Events for Simple, Certain Operation

Level 2

Level 1

Priority

OPERATOR’S LEVEL TABLE

OPE

2

OPE

6

Password

21233

OPE

1

12123

22342

Permission Override
Area Change
ALM Select
ALM Reset (ALL)
ALM Ack/Reset
ALM Arm/Dis (ALL)
ALM Arm/Dis
ALM Status Svc
ALM History Svc
Output Ports
CAM Select
CAM Pos
CAM Preset Prg
CAM Menu On/Off
CAM Function Cds
CAM Receiver
CAM Setup Data
CAM Lock
CAM Lock Override
DVR Select
DVR Ctrl
Tour Sequence
Group Sequence
Group Preset
SEQ Stop (ALL)
SEQ Controller Prg
Video Loss Svc
MON Select
MON Lock
OSD On/Off
Time & Date On/Off

Area Change

ALM Reset (ALL)
ALM Ack/Reset

ALM Arm/Dis
ALM Status Svc

Output Ports
CAM Select
CAM Pos

CAM Menu On/Off
CAM Function Cds
CAM Receiver

CAM Lock
CAM Lock Override

Group Sequence
Group Preset
SEQ Stop (ALL)

Video Loss Svc
MON Select

Time & Date On/Off

ALM Status Svc

CAM Select
CAM Pos

CAM Receiver

CAM Lock

Group Sequence
Group Preset
SEQ Stop (ALL)

MON Select

Time & Date On/Off

CAM Select

CAM Lock

Group Sequence

SEQ Stop (ALL)

Time & Date On/Off

Group Sequence

SEQ Stop (ALL)

Time & Date On/Off

Level 3

OPE

7

OPE

16

31256

34682

Level 4

OPE

17

OPE

35

34397

31625

Level 16

OPE

500

OPE

512

39262

33681

Operator Registration Example

Operator Classes Setup Menu

Setup Example

Controller-Camera Partition Setup Menu

Partitioning and Priority Overview

Tour Sequences Setup Menu

Group Presets Setup Menu

Group Sequences Setup Menu

Logical 2 Logical 3 Logical 4 Logical 5

ID 1-5

Local 1-5

G-Preset

Local -2

Physical 12

Controller 2

Logical 1

ID 1-5

Local 1-5

G-SEQ

Local -3

Physical 13

Controller priority

AREA 1

Operator to Controller

Controller-Camera

ID 1-5

Local 1-5

Tour

Local -1

Physical 11

Controller 1

Operator priority

Cam-Mon

Area

ID 6-10

Local 1-5

Tour

Local -1

Physical 14

Controller 3

ID 6-10

Local 1-5

G-Preset

Local -2

Physical 15

Controller 4 Controller 5

ID 6-10

Local 1-5

G-SEQ

Local -3

Physical 16

Controller-Mon

Cont-G.SEQ

AREA 2

PRODUCT CONFIGURATION

Matrix Switcher: WJ-SX650

Power Source 120 V AC, 60 Hz
Power Consumption 60 W
Ambient Operating Temperature –10 °C ~ +50 °C (14 °F ~ 122 °F)
Ambient Operating Humidity Less than 90 %
Video Input Board x 1
Video Output Board x 1
Expansion Slot x 1

RS-485 (Camera) Port 6-conductor modular jack x 4 (2-wire or 4-wire communication,

With termination switches (MODE 1 ~ 4))

Dimensions (W x H x D) 420 mm x 265 mm x 372 mm (16-9/16" x 10-7/16" x 14-3/5")

(excluding rubber feet and projections)

Weight 19.0 kg (42 lbs.)

Power Supply NTSC model: 120 V AC, 60 Hz
Power Consumption 60 W
Ethernet Ports 10Base-T/100Base-TX, RJ-45 x 3

System controller* (1 port), System device (1 port), other (1 port)
* Maximum 64 controllers

RS-232C Port 9pin D-sub connector x 2
Ambient Operating Temperature

+5 °C ~ +45 °C (41 °F ~ 113 °F)

Ambient Operating Humidity Less than 90 %
Dimensions (W x H x D) 420 mm x 88 mm x 350 mm (16-9/16" x 3-7/16" x 13-3/4")

(excluding rubber feet and projections)

Weight 9 kg (19.8 lbs.)

Ethernet Port 10Base-T/100Base-TX, RJ-45 x 1
Alarm Output Port 1, 2 Open collector output x 32, Max. 24 V DC, 100 mA
VS Input 1 V [p-p] / 75 Ω (VS IN)
VS Output (VS OUT (THRU)): VS loop-thru output

(VS OUT): 1 V [p-p] / 75 Ω (VS)

Serial Port 9pin D-sub connector x 1
Dimensions (W x H x D) 355 mm x 38 mm x 134 mm (14" x 1-1/2" x 5-3/10")

Video Input Board: WJ-PB65C32

Camera Input 1 V [p-p] / 75 Ω (BNC x 32), composite video signal

(CAMERA IN 1 ~ 32) 0.5 V [p-p] / 75 Ω data signal and

2.5 V [p-p] / 75 Ω vertical timing pulse multiplexed
Video Output 1 V [p-p] / 75 Ω (25pin D-sub connector x 4),
(VIDEO OUT 1 ~ 4) active loop-thru output
Alarm Input N.O. (Normally Open contact) or
(ALARM IN) N.C. (Normally Close contact) selectable x 32 (37pin D-sub connector)

Dimensions (W x H x D)

Main Board 346 mm x 42 mm x 225 mm (13-3/5" x 1-3/5" x 8-4/5")
IN X-2 Board 355 mm x 21 mm x 115 mm (14" x 4/5" x 4-1/2")
IN X-1 Board 355 mm x 38 mm x 115 mm (14" x 1-1/2" x 4-1/2")

Video Output Board: WJ-PB65M16

Monitor Output 1 V [p-p] / 75 Ω (BNC x 16)

(MONITOR OUT 1 ~ 16)

Data Port (DATA 1 ~ 4)

DATA 1 Terminal Mode (TMNL)/PS• Data (PS• DATA) selectable
DATA 2 Terminal Mode (TMNL)
DATA 3, 4 Terminal Mode (TMNL)/Digital Disk Recorder (HDR) selectable

6-conductor modular jack x 4 (With termination switches (MODE 1 ~4))

Alarm Output

(ALARM OUT 1, 2)

Alarm Output Open collector output x 32, Max. 24 V DC, 100 mA
Alarm Recover Input Non-voltage make contact input x 16
Time Adjust Input Non-voltage make contact input x 1
Time Adjust Output Open collector output x 32, Max. 24 V DC, 100 mA

Extension Port 6-conductor modular jack x 2

(EXTENSION 1 IN, OUT) (With a termination switch (TERM: ON, OFF))

VS Input 1 V [p-p] / 75 Ω (VS IN)
VS Output

(VS OUT (THRU)): VS loop-thru output, (VS OUT): 1 V [p-p] / 75 Ω (VS)

Serial Port 9pin D-sub connector x 2
Dimensions (W x H x D)

Main Board 346 mm x 42 mm x 225 mm (13-3/5" x 1-3/5" x 8-4/5")
OUT X-3 Board 355 mm x 21 mm x 115 mm (14" x 4/5" x 4-1/2")
OUT X-2 Board 355 mm x 21 mm x 115 mm (14" x 4/5" x 4-1/2")
OUT X-1 Board 355 mm x 38 mm x 115 mm (14" x 1-1/2" x 4-1/2")

Expansion Slot x 3

RS-485 (Camera) Port 6-conductor modular jack x 12 (2-wire or 4-wire communication,

With termination switches (MODE 1 ~ 4))
Extension Port 6-conductor modular jack x 2
(EXTENSION 1 IN, OUT) (With a termination switch (TERM: ON, OFF))
Extension Port 37pin D-sub connector x 2
(EXTENSION IN 2, 3)
Extension Port 37pin D-sub connector x 2
(EXTENSION OUT 2, 3)

Dimensions (W x H x D) 420 mm x 265 mm x 372 mm (16-9/16" x 10-7/16" x 14-3/5")

(excluding rubber feet and projections)

Weight 18.0 kg (40 lbs.)

6

SYSTEM EXAMPLES

Central Processing Unit: WJ-MPU955A Network Board: WJ-PB65E01

Rear View

420(16-9/16")

Operation Indicator
Screws
Fan Alarm Indicator
Hard Disk Drive Indicator
Active Indicator

Operation Switch
Redundant Selector
Mode Selector
Reset Button
Test Ports

Ethernet Ports
Peripheral Interface Ports
Cooling Fan Unit
Power Switch
AC Inlet Socket

Front View

481.2(18-15/16")

88(3-7/16")

<Front panel attached>

<Front panel detached>

Up to 64 domains can be connected in a satellite configuration.

Video

Link

Video

Link

Domain #1 Domain #2

System650EX + GX system

System650EX [512 x 64]

System850 + GX system

Domain #3

Domain #64

Up to 64 domains.
Each domain needs the WJ-ASC960 Upgrade Software.
In one domain, the System650EX and the System850
cannot be mixed.

Note: MXSW, MXCONT, MXOSD and Bridge are only descriptive labels and neither product names nor model numbers.

WJ-MPU955A WV-CU950WJ-ASC960WJ-MPU955A WV-CU950WJ-ASC960WJ-MPU955A

WJ-CA68

WJ-CA68WJ-CA68

WV-CU950WJ-ASC960

IP Network

WJ-SX650#5

(256 x 32)

WJ-SX650#3

(64 x 32)

WJ-SX650#4

(256 x 32)

WJ-SX650#6

(64 x 32)

WJ-SX650#1

(256 x 32)

WJ-SX650#2

(256 x 32)

WJ-SX850

MXSW

WJ-SX650

MXSW

WJ-SX650

MXSW

WJ-SX850

Bridge

WJ-SX850

MXOSD

WJ-SX850

MXCONT

System650EX only : up to 512 x 64 / Domain
System850 only : up to 1,024 x 256 / Domain
GX only : up to 1,024 x 256 / Domain
System650EX + GX : up to 512 x 64 + GX 1,024 x 256 / Domain
System850 + GX : up to 1,024 x 256 + GX 1,024 x 256 / Domain

(1 256) (257 512)

WJ-GXD900

WJ-GXE900

WJ-GXD900

WJ-GXE900

Front View

Rear View

Ethernet Port
Alarm Output Ports 1, 2
VS Input Connector
VS Output Loop-thru Connector
VS Output Connector
Serial Port

7

An expanded full matrix configuration for a maximum 512-camera x 64-output system.

monitor
x 32

monitor
x 32

PC

in

in

in
in
in

in
in
in

in
in
in

in
in
in

in

out2

out1/NW Board

in

out2

out1/NW Board

in

out2

out1/NW Board

in

out2

out1/NW Board

in
in
in

in
in
in

in
in
in

in
in
in

in

in

in

in

out2

out1/NW Board

in

in

out2

out1/NW Board

WJ-SX650UWJ-SX650

WJ-SX650UWJ-SX650

HUB

HUB

WJ-MPU955A

BNC x 32 BNC x 32

BNC x 32 BNC x 32

Camera

256 225

Camera

224 129

Camera

128 33

Camera

32 1

Camera

257 288

Camera

289 384

Camera

385 480

Camera

481 512

WV-CU950

WJ-SX650U

MXSW114

MXSW11

(1~256 x 1~32)

Bridge1 (1~32)

Bridge2 (33~64)

MXSW12

(257~512 x 1~32)

MXSW21 (1~256 x 33~64) MXSW22 (257~512 x 33~64)

MXSW214 MXSW213 MXSW212 MXSW211 MXSW221 MXSW222 MXSW223 MXSW224

MXSW113 MXSW112 MXSW111

Bridge11 Bridge12

Bridge21 Bridge22

MXSW121 MXSW122 MXSW123 MXSW124

WJ-SX650U WJ-SX650U WJ-SX650U WJ-SX650U WJ-SX650UWJ-SX650 WJ-SX650

WJ-HD316A x 2 WJ-HD316A x 6 WJ-HD316A x 6 WJ-HD316A x 2

monitor x 2 monitor x 6 monitor x 6 monitor x 2

WJ-HD316A x 2 WJ-HD316A x 6 WJ-HD316A x 6 WJ-HD316A x 2

monitor x 2 monitor x 6 monitor x 6 monitor x 2

Model No. Description
WJ-SX650 32 in x 16 out Matrix Switcher
WJ-SX650U Card Cage
WJ-PB65C32 32ch Video Input Board
WJ-PB65M16 16ch Video Output Board
WJ-PB65E01 Network Board
WJ-CA65L07K 0.7 m Expansion Cable Kit *
WJ-CA68 D-sub/BNC Video Cable
WJ-MPU955A Main CPU Unit
WV-CU950 Ethernet System Controller **
PTZ Dome Camera / Fixed Camera
Monitor (for Switcher)
16ch Digital Disk Recorder
Monitor (for Recorder)

Q'ty

6
14
30

6

6
14

128

1

2

512

64
32
32

* Cable length depends on the cage layout.
** Number of controller depends on system configuration.

Note: MXSW and Bridge are only descriptive labels and neither product names nor model numbers.

WJ-CA68 x 4 WJ-CA68 x 12 WJ-CA68 x 12 WJ-CA68 x 4

WJ-CA65L07K

WJ-CA68 x 4 WJ-CA68 x 12 WJ-CA68 x 12 WJ-CA68 x 4

Card Cage: WJ-SX650U

SPECIFICATIONS SPECIFICATIONS

SPECIFICATIONS

SPECIFICATIONS

SPECIFICATIONS SPECIFICATIONS

MATRIX SYSTEM650EX PRODUCT COMPONENTS

Matrix Switcher

WJ-SX650

Card Cage

WJ-SX650U

SPECIFICATIONS (Expanded System)

Video Number of Inputs

1.0 V [p-p] / NTSC composite 75 Ω / BNC Connector x Up to 512

Interface

With Multiplexed Vertical sync (VD2) and control data.
Logical Camera No. Range 1 ~ 99,999
Number of Loop 1.0 V [p-p] / NTSC composite 75 Ω / 25pin D-sub connectors.
Through Outputs Active loop through.
Number of Outputs 1.0 V [p-p] / NTSC composite 75 Ω / BNC Connector x Up to 64
Logical Monitor No. Range 1 ~ 9,999

Controller Number of Controllers 64 (WV-CU950 and ActiveX controller)
Recorder Number of Recorders

Up to 32 (WJ-HD300A Series, WJ-RT416) *Connection with the WJ-RT416 is a plan for future.

Alarm Alarm Source Total up to 1,024 consists of followings

Terminal inputs x 1,024 Camera alarm x 512 Video loss alarm x 512

Serial alarm x 1,024 (Total of terminal input and output is 1,024)

Supports one state input mode.
Number of Alarm Programs 1,024
Alarm Outputs Up to 256 (Terminals), Trigger: Active/ACK/RESET
Alarm Control Ack (Auto/Manual), Reset (Auto/Manual), All reset, Arm, Disarm
Alarm Action

Up to10 actions including Camera spot, Tour SEQ, Group SEQ and Text
Alarm Target Up to 64 targets, Up to 64 monitors in a target.
Multi-Alarm Mode SEQ/HOLD
Alarm Log Up to 30 days and 500KB x 99 files per day.
Alarm Schedule Possible by Timer Event

Functions Partitioning Controller-Area, Monitor, Camera view, Camera cont, G-SEQ,

Alarm, Alarm I/O, Recorder. Operator-Controller. Monitor-Camera.
Priority 0 ~ 65,534 for Operator, Controller, Alarm and Timer event
Sequence Tour Sequence; 128 patterns, 64 steps, Logical No. 1 ~ 9,999

Group Preset; 128 patterns with 64 monitors, Logical No. 1 ~ 9,999

Group Sequence; 128 patterns, 64 steps, Logical No. 1 ~ 9,999

Dwell Time; Up to 86,339 seconds
Timer Events

1,024 (Camera Spot, Tour SEQ, Group Preset, Group SEQ, Alarm, Mode change)
Area 64
Redundant CPU Supported
Setup Method Admin software (English)

Operator No. of Registration 512

Level Class setup 1 ~ 16
Priority 0 ~ 65,534
Operator Login/System 64

Administrator No. of Registration 128

Level 1 ~ 4

Camera Control

PTZ Up to 64 steps

(depending on the

Iris OPEN/CLOSE/RESET

camera model)

Focus FAR/NEAR/AUTO
Wiper ON (Keep pressing)
Defroster ON/OFF
Preset Positions Up to 255 Preset Positions
Setup Menu ON/OFF
Auto Mode Auto Pan, SEQ, Sort, Patrol
B/W Color/BW/AUTO1/AUTO2
AUX AUX 1/2 ON/OFF
Function Number 1 ~ 256

OSD Service Time Date Time: 12/24H, Date: 10 formats

Camera Title 28 alpha-numeric characters
Alarm Title 18 alpha-numeric characters
Status System, Video loss, Alarm
Customizable Characters 32
Log Alarm (100), Video loss (100)

Log Log by Admin Software Switching, Operator, Alarm, Video loss, Admin setup

Video Input Board

WJ-PB65C32

Video Output Board

WJ-PB65M16

Network Board

WJ-PB65E01

D-sub/BNC Video Cable

WJ-CA68

(0.5 m : 1.65 ft)

Expansion Cable Kit

WJ-CA65L20K

(2 m : 6.6 ft)

WJ-CA65L07K

(0.7 m : 2.3 ft)

Digital Disk Recorders

WJ-HD316A (16ch)
WJ-HD309A (9ch)

Central Processing Unit

WJ-MPU955A

Ethernet System Controller
with 3D-Joystick & Jog/Shuttle

WV-CU950

Upgrade Software

WJ-ASC960

• All TV pictures are simulated.

• Weights and dimensions are approximate.

• Specifications are subject to change without notice.

• These products may be subject to export control regulations.

DISTRIBUTED BY:

http://panasonic.net/security/

Printed in Japan (2P-554A)

Trademarks and registered trademarks

–Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.

Important

– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
–Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.