Panasonic 6363 User Manual

Fire alarm system
Plate for wire installation 6363
General
6363 is a kit that consists of the following:
A metal plate with pre-drilled screw
holes for all kinds of detectors / bases.
A clamp (to fix the plate to a wire)
Two screws 3.5x10 mm
Two screws 3.5x12 mm
Two screws 4x15 mm
Two screws 4x27 mm
Two screws 4x40 mm
Two spacers 6.4 mm Ø 9.5 / 4.5
Two spacers 25.4 mm Ø 6.4 / 4.5
Product applications
The kit is used with any of the Panasonic heat or smoke detectors plugged in a base, allowing the user to make a wire installation of the detector.
Panasonic Electric Works Fire & Security Technology Europe AB Citadellsvägen 23, SE-211 18 Malmö, Sweden Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99 info@mfstech.com • www.panasonic-fire-security.com
Type number
6363 Plate for wire installation. (Detector and base are not included.)
Dimensions:
Technical data
Weight (g) ~160 Material Aluzink ®
All technical features and data are subject to changes without notice, resulting from continuous development and improvement.
Product Leaflet Date of issue Revision / Date of revision
MEW00350 2003-03-04 2 / 2006-08-31
Loading...