EXHIBIT #6
Fty Control No.: KMP-00-F004
FCC ID : ACJ5Z6KX-P8425
OPERATING INSTRUCTIONS
FOR USERS IN UNITED STATES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
BReorient or relocate the receiving antenna.
BIncrease the separation between the equipment and receiver.
BConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. BConsult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.
FCC Warning: To assure continued FCC emission limit compliance, the user must use the recommended shielded interfacing cable when connecting to a host computer. Also, any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
Technical Support Calls
If you have read this manual and tried the troubleshooting procedures and you are still having difficulty, please contact the reseller from which the unit was purchased. You may also call the end user technical support telephone number which is operational during East Coast business hours (9:00 AM to 7:00 PM). The end user technical support number is 1-888-744-2424.
This number is available within the U.S. only.
Helpful Phone Numbers
To locate your nearest sales dealer |
CALL 1-800-742-8086 ask for COLOR |
To order consumables |
CALL 1-800-222-0584 |
To order operating instructions/CD’s |
CALL 1-800-833-9626 |
To locate your nearest authorized service center |
CALL 1-888-744-2424 |
For technical support |
CALL 1-888-744-2424 |
Automated 24-hour support via Fax back |
CALL 1-800-222-0584 |
Electronic bulletin board |
CALL 1-201-863-7845 |
World Wide Web Technical & Driver Support |
http://www.panasonic.com/alive |
■ When using the network card, use the following shielded cable. For 10 Base T: Category 3, 4 or 5 shielded cable.
For 100 Base TX: Category 5 shielded cable.
16