Panasonic 320K, N325K2 datasheet
N325K / N320K
Appearance may look
Panasonic’s unique heterojunction technology uses ultra-thin
amorphous silicon layers. These thin dual layers reduce losses,
resulting in higher energy output than conventional panels.
Tab
Finger
n-type crystalline silicon
Double-sided textured surface
i-type amorphous layer
Amorphous layer
Transparent electrode (TCO)
Lattice-type electrodes
These amorphous silicon layers
reduces the recombination of
electrons to minimum level.
Ultra-thin amorphous silicon layer
Electrodes
Panasonic HIT® Black is the brand new all-black module which
features high efficiency 19.4%, industry leading temperature coefficient
of -0.258% /⁰C and a sleek design. Powerful and aesthetically designed
to make your roof look great.
Our competitive advantages
High Efficiency at High Temperatures
As temperature increases, HIT® continues to
perform at high levels due to the industry leading
temperature coefficient of -0.258% /⁰C. No other
module even comes close to our temperature
characteristics. That means more energy
throughout the day.
Quality and Reliability
Panasonic’s vertical integration, 21 years of
experience manufacturing HIT® and 20 internal
tests beyond those mandated by current
standards provides extreme quality assurance.
Appearance may look
different on actual product
25 Year Product and Performance Warranty**
Industry leading 25 year product workmanship
and performance warranty is backed by a century
old company- Panasonic. Power output is
guaranteed to 90.76% after 25 years, far greater
than other companies.
Higher Efficiency 19.4%
Enables higher power output and greater energy
yields. HIT® provides maximum production for
your limited roof space.
Low Degradation
HIT “N-type” cells result in extremely Low Light
Induced Degradation (LID) and zero Potential
Induced Degradation (PID) which supports
reliability and longevity. This technology reduces
annual degradation to 0.26% compare to 0.70%
in conventional panels, guaranteeing more power
for the long haul.
Enhanced Frame Design
A new 40mm frame increases durability and
strength, being able to handle loads of up to 5400Pa.
Also, the water drainage system gives rain water
and snow melt a place to go, reducing water stains
and soiling. Less dirt on the module means more
sunlight getting through to generate power.
HIT® is a registered trademark of Panasonic Group
N325K / N320K
97%
ELECTRICAL SPECIFICATIONS
Model VBHN325KA03 VBHN320KA03
Rated Power (Pmax)¹ 325W 320W
Maximum Power Voltage (Vpm) 59.2V 58.7V
Maximum Power Current (lpm) 5.50A 5.46A
Open Circuit Voltage (Voc) 70.9V 70.5V
Short Circuit Current (lsc) 5.94A 5.89A
Temperature Coefficient (Pmax) -0.258%/°C -0.258%/°C
Temperature Coefficient (Voc) -0.17V/°C -0.16V/°C
Temperature Coefficient (lsc) 3.27mA/°C 3.21mA/°C
NOCT 44.0°C 44.0°C
CEC PTC Rating (Tentative) 308.5 303.7
Cell Efficiency 21.8% 21.5%
Module Efficiency 19.4% 19.1%
Watts per Ft.² 18.03W 17.8W
Maximum System Voltage 600V 600V
Series Fuse Rating 15A 15A
Warranted Tolerance (-/+) +10%/-0%* +10%/-0%*
MECHANICAL SPECIFICATIONS
Model VBHN325KA03, VBHN320KA03
Internal Bypass Diodes 4 Bypass Diodes
Module Area 18.02 Ft.² (1.67m²)
Weight 40.81 Lbs. (18.5kg)
Dimensions LxWxH 62.6 x 41.5 x 1.6 [1590x1053x40mm]
Cable Length +Male/-Female 40.2/40.2 in. (1020/1020 mm)
Cable Size / Type No. 12 AWG / PV Cable
Connector Type
Static Wind / Snow Load 112 PSF (5400Pa)****
Pallet Dimensions LxWxH
Quantity per Pallet / Pallet Weight 24 pcs./1049 Lbs. (476 kg)
Quantity per 40' Container 672 pcs.
Quantity per 20' Container 288 pcs.
2
Multi-Contact® Type IV (MC4™)
65.3x43.7x48.5 in. (USA)
63.7x42.2x46.4 in. (Malaysia)
PERFORMANCE WARRANTY
DIMENSIONS
Unit: inches (mm)
DEPENDENCE ON IRRADIANCE
Please refer to installation manual for different loads.
14.9 13.5
90.76%
More power
over 25 years
80%
Operating Conditions & Safety Ratings
Model VBHN325KA03, VBHN320KA03
Operating Temperature -40°F to 185°F (-40°C to 85°C)
Hail Safety Impact Velocity 1" hailstone (25mm) at 52 mph (23m/s)
Safety & Rating Certifications
UL 1703 Fire Classification Type 2
Limited Warranty 25** Yrs Workmanship and Power Output (Linear)***
Manufacturing Locations USA and Malaysia
NOTE: Standard Test Conditions: Air mass 1.5; irradiance = 1000W/m²; cell temp. 25°C
* Maximum power at delivery. For guarantee conditions, please check our guarantee document.
** Installation need to be registered through our website www.panasonicusahitwarranty.com within 60 days
in order to receive twenty-five (25) year Product workmanship. Otherwise, Product Workmanship will be
only fifteen (15) years.
*** 1st year 97%, after 2nd year 0.26% annual degradation to year 25.
1
STC: Cell temp. 25°C, AM1.5, 1000W/m²
2
Safety locking clip (PV-SSH4) is not supplied with the module.
NOTE: Specifications and information above may change without notice.
Panasonic Eco Solutions of North America
Two Riverfront Plaza, 5th Floor, Newark, NJ 07102
panasonicHIT@us.panasonic.com
na.panasonic.com/us/solarpanels
UL 1703, cUL Certified by UL LLC.
CEC, FSEC, ISO9001
Reference data for model: VBHN325KA03
(Cell temperature: 25°C)
CAUTION! Please read the installation manual carefully before using the products.
Used electrical and electronic products must not be mixed with general household waste. For proper treatment,
recovery and recycling of old products, please take them to applicable collection points in accordance with
your national legislation.
All Rights Reserved © 2018 COPYRIGHT Panasonic Corporation
Specifications are subject to change without notice
08/2017
RS17494DS_6.18
Loading...