Panasonic Industrial Company
2P20S3R236A-1A
Air Conditioning Department
2P20S3R236A-1A
Application Cooling (C) / Heating (H)
Ref. Charge Limit (C/H) 38.8 oz. 1100 g
Evap. Temp. Range (C/H) 5°F to 53.6°F -15oC to 12oC
(C) 14°F to 53.6°F -10oC to 12oC
Specification Number SC-52170462-C
Rated Performance @230V
Capacity 13,330 Btu/hr
Motor Input 1,235 Watts
Current 5.4 Amperes
E.E.R. 10.79 Btu/hr/ W
Compressor Data
Pump Type Rotary
Displacement 19.1 cc/rev
Oil ATMOS M60 or equivalent
Oil Charge (Precharged) 11.80 fl. oz. 350 cc
Net Weight 28.0 lb 12.7 kg
1
208/230 V, 60 Hz R-22
BTU 13,000
R
Motor Data
Motor Type Permanent Split Capacitor
Locked Rotor Amperes 34 A at 240 V
Winding Resistance Main: 2.157W, Aux: 2.655W
Max. Continuous Current
2
Maximum Operating Conditions
Condensing Temp. 149°F 65°C
Return Gas Temp. 95°F 35°C
Discharge Gas Temp. 239°F 115°C
Motor Wire Temp. 266°F 130°C
Electrical Components
Overload Protector 7100078
Texas Instrument part # MRA 98768
Run Capacitor 30 µF/370 VAC
Performance Data @230V
Based on:
Return gas Temp. 95°F 35.0°C
Liquid sub-cooling 15°F 8.3°C
Ambient 95°F 35.0°C
F°001F°011F°021F°031F°041
o
C3.34oC9.84oC4.45oC06oC
8.73
.PMET.PAVE
F°53
o
C
7.1
rh/utB
sttaW
0903105321026110980107101
058079580150215131
serepmA
8.33.48.43.58.5
.PMET.DNOC
1
Rated @ ASHRAE/T Conditions
Evaporating Temp. 45°F 7.2°C
F°54
o
C
2.7
rh/utB
sttaW
548579501153210631
serepmA
8.33.48.44.50.6
Condensing Temp. 130°F 54.4°C
Return Gas Temp. 95°F 35.0°C
Liquid Temp. 115°F 46.1°C
F°55
o
C
8.21
Ambient Temp. 95°F 35.0°C
UL file no.: SA4615; CSA file no.: LR46130, LR51349, LR66348, LR76919, LR95789, LR109092
rh/utB
sttaW
538579021106210041
serepmA
7.33.49.45.52.6
0695109051512410333153421
0929109281062710126153151
2
Contact Panasonic for value.
2P20S3R236A-1A
ALTL
272542
)17.01()56.9(
208/230 V, 60 Hz R-22
BTU 13,000
WIRING DIAGRAM
COMPRESSOR ACCESSORIES
seirosseccArebmuNtraP
1revoClanimreT-teksaGU0260707
2nwoddlohPLO-gnirpS0021407
3revoClanimreTU9120707
4tuN-teksaGU1260707
5revoClanimreT-tuN0030807
temmorG5180707
COMPRESSOR MOUNTING
sole and full responsibility and shall indemnify seller with respect to all product failures, and all consequences thereof. Operation of the product outside of the parameters and conditions specified
herein shall serve to invalidate all seller warranties, if any, with respect to the product. Use this document as reference only. For specifications, please contact Panasonics engineering department.
This document sets forth certain operational parameters and conditions for operation of this product. If this product is operated outside of the parameters and conditions stated herein, buyer assumes