Panarex Electronics 4500 User Manual

Download

Page 1

USER’S GUIDE

4500

DIGITAL SATELLITE RECEIVER

Panarex Electronics

Sun Valley, California, U.S.A.

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

PREFACE

1. OVERVIEW

1. WHAT IS THIS PRODUCT FOR?

2. WHAT FEATURE DOES THIS PRODUCT OFFER?

3. FOR YOUR SAFETY

4. PLEASE CHECK THE FOLLOWING ACCRSSORIES ARE ENCLOSED

5. HOW TO USE THE REMOTE CONTROL KEY

6. FRONT PANEL

7. REAR PANEL

8. CONNECTION DIAGRAM

2. OPERATING

1. Start Up

2. Installation

3. Edit Channel

4. User Setup

5. System Tools

6. Game

7. USB

8. Channel List

9. Program Guide

10. Audio change

11. Multi Pictures

12. Recall the Favorite channel

3. Optional Items

1. UHF Remote Control Kit (Optional)

2. Universal III Remote Control (Optional)

4. SPECIFICATION

5. TROUBLE SHOOTING

Page 8

1. OVERVIEW

1. WHAT IS THIS PRODUCT FOR?

This product is designed for using Digital Satellite and allows you to enjoy a lot of broadcasting whenever you want to

watch it anytime. By simply pressing the button of the remote control unit, the vivid picture and life –like sound of digital

broadcasting that your TV portrays through this product, allows you to watch whatever channel you wish of the digital

broadcasting.

Through this manual you will notice that the operation is easy to use.

This manual will help you get the most from this product and guide you through Installation, channel selection and many

other functions.

In case you experience any difficulties to use this product, please consult the relevant section of this manual.

From now on, enjoy digital broadcasting with digital satellite receiver!!!

2. WHAT FEATURE DOES THIS PRODUCT OFFER?

2.1 General Features

▪ USB PVR ready (FAT16/FAT32, Format function, Recording, Playback, EPG Time record, Time shifted recording)

▪ USB 2.0 Host 2 Interface (Front and Rear) - JPEG Photo Album, MP3, Firmware Update

▪ 10days EPG (Electronic Program Guide)

▪ Full Compliant of MPEG-2 Digital & DVB broadcasting

▪ 950-2150MHz Input Frequency (IF Loop Throughout)

▪ Variable Input Symbol Rate (1-45Msps)

▪ Multi Language OSD

▪ Automatic PAL/NTSC Conversion

▪ Fast Channel Change & Scan

▪ 5,000 Channel TV & Radio Program

▪ Flexible reception of SCPC & MCPC from C/Ku-Band Satellites

▪ S/PDIF (Digital Audio or Dolby AC3 Stream out)

▪ Timer Function (Automatic Turn On/Off by Setting Function)

▪ 256 Colors (Graphic User Interface) Number

▪ PIG (Picture In Graphic), Multi-Picture, Zoom function

▪ 5 Favorite List & 100 programs per each

▪ Powerful Channel Editing Function

- Sorting: Alphabetic, Satellite, TP order, FTA/Scramble, Parental Lock

- Move, Delete, Favorite Edit

- Parental Lock, Channel Rename, Channel Skip

▪ Manual PID/Satellite & TP/Network Scan

Page 9

▪ Blind Scan

▪ Satellite Scan – Simultaneous Scan with various Satellites

▪ DiSEqC 1.2 & USALS Compatible

▪ Comparable of Setting the Frequency for SMATV System

▪ Software Upgrade via USB Memory Stick or RS232C (Receiver to Receiver, PC to Receiver)

▪ UHF- Ready (U-50 Kit Optional)

▪ Universal 3 Remote Control (optional)

2.2 Additional Features

▪ RTC (Real Time Clock)

▪ Component Out (YPbPr)

▪ Integrated USB2.0 (Host), Support to USB Memory Stick

▪ Multi pictures (Max. 9)

3. FOR YOUR SAFETY

▪ Do not open the cover. It may cause malfunction or electric shock.

▪ When you do not use the product for a long time, please pull the power cord out from the outlet.

Also do not use a damaged power cord that may cause fire or electric shock.

▪ Do not use install the product in a humid area.

▪ Do not cover the product or place anything heavy on the product, Keep clear space around the product for sufficient

ventilation.

▪ Avoid using spray or liquid materials around the product. Don’t make other materials come into the inside the product.

▪ Do not connect to modify cables when the product is plugged in.

▪ Socket-outlet shall be installed near the equipment and shall be easily accessible.

▪ Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases

shall be placed on the apparatus.

4 PLEASE CHECK THE FOLLOWING ACCRSSORIES ARE ENCLOSED

▪ User manual 1 set

▪ Remote Control Unit 1 Set

▪ Batteries (AAA Type) 2EA

▪ A/V Cable

Note !

If any of the accessories listed above are missing, Please contact the sales outlet where this product was initially

purchased.

Page 10

5. HOW TO USE THE REMOTE CONTROL KEY

Key Function

Turns the equipment on/off

Sounds Off/On

TV/RAD

Toggles between TV and Radio operation

TV/SAT

Toggles between TV & SAT operation

SIG

Shows signal / quality level

Multi Picture (Max 9 CH)

TIME

Shows current Time

PAUSE

Holds the picture or release the pause

Selects audio mode

AUDIO

(mono / Stereo, left only and right only).

FAV

Enter favorite program or Exit from Favorite Program

Shows channel information, such as channel

Number, channel name, Frequency, Polarity,

INFO

Symbol Rate, Video PID, Audio PID and PCR PID

EPG

Shows program information

LAST

Returns to previous program

Enters main menu screen. Or exits menu screen

Execute page down function in the menu

Execute page up function in the menu

EXIT

Moves to upper menu

Channel up/down

Moves the cursor upward/downward in the menu screen

Shows Channel list. Confirms selection

Volume down/up

Change the value of a selected line

Changes channel directly.

Controls the numerical operation.

Input the alphabet in the name edit screen

HDD

Enter Hard Disk (Record) menu

SAT

Enter programmed satellite list

Find

Find Channel

Zoom

Zoom Screen

PVR i

Information about PVR

Sleep

Sleep timer

Page 11

6. FRONT PANEL

1. POWER

To put power in and out of standby mode.

2. Menu

To enter main menu screen.

3. VOLUME

To make volume up and down.

Moves the cursor upward/downward in the menu screen

4. OK

To confirms selection, To show Channel List

5. CHANNEL

To move up and down in the menus, To change channels.

6. Exit

To move to upper menu.

7. Display

To show channel number, error messages, remote control commands and time in standby mode.

8. USB

Connect UBS Port.

Page 12

7. REAR PANEL

NO NAME FUNCTION

LNB IN IF Loop-through output to 2

receiver

LNB OUT IF INPUT from LNB to receiver

S/PDIF For digital audio output

4 VIDEO Composite Video Output

AUDIO-R Right Audio Output

AUDIO-L Left Audio Output

UHF Option for UHF Remote Control lit

RS 232 Connect Serial Port

USB2.0 Connect UBS Port

Y Component Video Output

Pb Component Video Output

12 Pr Component Video Output

TV OUT Output to TV

TV IN Input from terrestrial TV antenna

15 AC SWITCH AC Power ON/OFF (Reset Function)

Page 13

8. CONNECTION DIAGRAM

Connecting to digital TV using YPbPr port.

- Connect STB’s YPbPr output and Audio L/R output to a YPbPr in and Audio L/R in of TV

Please refer TV’s user manual for detailed YPbPr connection method.

Connecting TV and VCR with RF Cable (Single Antenna)

Connecting TV to analogue receiver and VCR with RF cable

Page 14

2. OPERATING

1. Start Up

If you are watching TV through the RF-cable, you need to adjust the Channel number. The type of TV and Channel

numbers are set to NTSC and Channel 3 at the factory.

Please follow the brief procedure below and watch the satellite programs.

1) Select the User Setup and confirm Language

2) Select the Installation and antenna setup

3) Adjust LNB configuration per each satellite

4) Execute scanning to find program

5) Exit from installation after all programs are searched.

1.1 Language

When the receiver is turned on for the first time, main menu is appeared as below photo. You can find desired menu by using ◀▶ ▲ ▼ key and select desired menu by press [OK] key.

Select the user setup and press [OK] or ▶ to enter Language menu as below photo and can select the desired language by using ◀▶ or [OK] key to confirm it.

* This Receiver supports 10 languages.

English, French, German, Italian, Spanish, Portuguese, Russian, Turkish, Polish and Arabic

2. Installation

Press the [OK] or ▶ key to enter Installation menu as below photo and use common password “0000”. Parental

control and channel edit are not accessible until satellite channel scanned and saved. Press the [OK] key on Antenna

setup menu and it is appeared on screen as below second photo.

Page 15

2.1 Antenna Setup

In this section you could know how to operate Antenna set-up.

2.1.1 Satellite List

• Press [OK] key on Satellite List in Antenna Setup menu to enter Satellite List.

When you enter to Satellite List menu, there will display the screen.

• Press [Red] key to enter Edit Satellite where you can

edit Satellite name and longitude

• Press [Green key to enter Add Satellite menu

Page 16

• Press [Blue] key, you will be asked “Are you sure to

delete?”. Select “yes” to delete the Satellite that

highlight focus on. Select “No” to cancel the operation

2.1.2 Satellite

You can find selected Satellite list by using ◀ ▶ or [OK] key and confirm it by [OK] key.

2.1.3 LNB Frequency

Select LNB type using keys◀▶ and ▲▼ keys. And confirm it by [OK] key.

Option is 5150 / 5750 / 5950 / 9750 / 10000 / 10050 / 10450 / 10600 / 10700 / 10750 / 11250 / 11300 / 5150-5750 /

5750-5150 / Universal (9750-10600)

2.1.4 Transponder

Select a specific transponder by using ◀▶ keys or [OK] key and confirm it by [OK] key.

2.1.5 DiSEqC 1.0 or 1.1

Select a specific setting for DiSEqC 1.0 or 1.1 by using ◀▶ keys or [OK] key and confirm it by [OK] key.

Option is Disable / LNB1 / LNB2 / LNB3 / LNB4 at DiSEqC 1.0.

Option is Disable / LBN1 to LNB16 at DiSEqC 1.1.

2.1.6 Legacy Switch

Select a specific setting for Legacy Switch by using ◀▶ keys or [OK] key and confirm it by [OK] key.

2.1.7 22Khz

In case you are using a Dual LNB or two antennas connected to a 22KHz tone switch box, make 22KHz tone switch

“ON” or “OFF” to select a LNB or an antenna.

2.1.8 Positioner Setup

It is used to set the DiSEqC 1.2 motor & USALS

If you have no positioner equipment, select “Disable”.

Page 17

1) DiSEqC 1.2

If you select “DiSEqC1.2”, “Local Longitude / Local Latitude” is not available.

• Press ◀▶ key or [OK] key to change satellite or transponder.

• Position No.& Save: You can press ◀▶ key or number key to select or input Position NO.

• Go to X: Press [OK] key to open a list. You can go to X or go to reference.

• After select “Satellite” and “Position No & Save”, you can move the highlight to “West/Save/East” line and press ◀ ▶ key to move the dish and press [OK] to save the position.

• Move the highlight to “Recalculation” and press [OK] key to recalculate.

2) USALS

Set the satellite’s longitude and local longitude / local latitude, USALS can move dish automatically.

• Local Longitude Please input Local Longitude by numeric keys and adjust E.W by using ◀▶ keys

• Local Latitude Please input Local Longitude by numeric keys and adjust S.N. by using ◀▶ keys

• Motor Setting

Switching the satellite can move the dish to the right place

• Limit Setup When you set “limit setup” to “West Limit/ East Limit”, you can move the dish to west or east by pressing ◀▶ key

manually. When you are moving to the target place, press [OK] key to save the point.

2.2 Satellite Scan

Scan all the listed transponders in a selected satellite. In “Satellite” item, press ◀▶ key to select satellite, which

you to scan. Otherwise, press [OK] key can open

the“satellite list” for you to select directly.

• Scan Option Press ◀▶ key to select scans all channels or just scans

free channels.

• Scan Channel Press ◀▶ key to select scans TV + Radio Channels, or just TV channels or just Radio channels.

• Network Scan Press ◀▶ key to select whether network search or not.

• Scan Mode Press ◀▶ key to select scans “Normal Scan” or “Blind Scan”

• Search

Press [OK] to start search

Page 18

2.3 Multi Satellite Scan

In “Satellite” item, press [OK] key to see the selected

satellite. The system will use DiSEqC1.0 / DiSEqC1.2 /

USALS function to search satellite and scan channels.

It will scan all the satellite displaying in the bottom box.

2.4 TP List & Scan

• Press ◀▶ key, you can switch satellite.

• Press [Red] key to open edit TP menu. User can edit TP info by using ◀▶ key manually.

• Press [Green] key, open new TP menu. User can add a new TP by using ◀▶ key manually.

• Press [Yellow] key will open dialog box asking you

whether confirm to delete current TP. When select

“Yes”, you will delete the channel which highlight focus

on. When select “No”, it will cancel the operation.

• Press [Blue] key will display a dialogue box. You can select “Scan Option, Scan Channel, Network Search” items,

and press [OK] to begin to TP Scan.

3. Edit Channel

Press the [OK] or ▶ key to enter Edit Channel menu and press▲▼ key to select menu items and press ◀ key or

[Exit] key to go back to main menu.

Page 19

3.1 TV Channel List

• You can move highlight by press▲▼ key and press [OK]

key to preview the current highlighted program in the

right side preview window.

• You can press ▲▼ key to implement the Page Up/Page

Down function.

• You can use ◀▶ key to switch “Program Group”.

• You can press [Menu] or [Exit] keys to go back to “Edit

Channel” menu.

• Press color key can implement the corresponding

function in “Channel List”.

3.1.1 Favorite

• Pressing [FAV] key, then pressing [OK] key can open

the “Favorite” window like above

• You can move highlight between 8 favorite groups by

pressing [Channel Up/Channel Down] key and press [OK]

key to make a favorite mark in the left side of the selected

Favorite group.

• Pressing [OK] key on the marked Favorite group can

cancel the exist favorite mark.

• After marking, pressing [Exit] key can back to “TV Channel List” , there will show a favorite mark beside the marked

channel.

3.1.2 Lock

• Press [Red] key can enter lock mode and press ▲▼ key

to move the highlight and press [OK] key, it will display a

dialogue to ask you to input password. The default

password is “0000”. If you input the correct password you

can see a “lock mark” in the right side of the highlighted

channel.

• After save and exit menu, STB will request you to input

the password while you want to watch the locked channel.

Page 20

3.1.3 Skip

• Press [Green] key can enter skip mode and press▲▼

key to move the highlight and press [OK] to make a “skip

mark” in the right side of the highlighted channel.

• After save and exit menu, the channel will be skip while

user change channel in the full screen.

3.1.4 Move

• Press [Yellow] key, then press▲▼ key to move the

highlight and press [OK] key to make a mark. There will

show a “moving mark” in the right side of the selected

channel like above

• You can move the selected channel to the position that

you want to place by press▲▼ key And press [OK] key to

confirm your decision.

3.1.5 Edit

• Press [Blue] key will open “Edit” menu.

• Press [Exit] can exit “Edit Channel” menu. If you do modification in “Edit Channel” menu, the system will show up

a message box to inquire you whether saving or not when exit.

3.1.5.1 Sort

• Press [Red] key can open the “Sort” window like above.

There are four kinds of sorting ways. You can press ▲▼

key to move highlight and press [OK] key to confirm your

selection

• The five kinds of sorting way are:

1. Name (A-Z): Sorting in Alphabetical Order, ignore “$”

symbol.

2. Name (Z-A): Sorting in Alphabetical Order, ignore “$”

symbol.

Page 21

3. FTA: Sort channel through free and scramble sequence. Free channel will in the front of channel list and

scramble channel will at the rear of channel list

4. Lock: Accumulated all locked channels and list in the last of TV Channel List.

3.1.5.2 Edit

In “Edit Channel” menu, press [Green], then press▲▼

key to move the highlight and press [OK] key to open the

“Rename” window. It shows the window like above:

• Press [Red] key can switch whether capital or not.

• Press [Green] key can delete the char on the cursor.

• Press [Yellow] key can save the modification.

• Press [Blue] key can cancel the operation.

3.1.5.3 Delete

Press [Blue] key, then press ▲▼ key to move the highlight and press [OK] key to make a delete mark in the right

side of the highlighted channel. After save and exit “Edit Channel” menu, the marked channel will be deleted.

3-2 Radio Channel List

Basically, the operation of “Radio Channel List” is same as “TV Channel List”, but there is one point different: In “Radio

Channel List” mode, there is no video information, so it will always display Radio’s logo in the right side preview window.

3-3 Delete All

• Press [Ok] key, it will show up a warning message box to

inquire you whether delete all or not.

• If you select “Yes”, all channels will be deleted. And if

you select “No” or press [Exit] key, you can exit the

function directly without save.

Page 22

4. User Setup

Press the [OK] or ▶ key to enter User Setup menu. Press▲▼ key to select menu items and press ◀ key or [Exit] key to go back to main menu.

4.1 Language

• Language: press ◀▶ key to select menu languages,

the selections of languages include: English, French,

German, Russian, Arabic, Portuguese, Turkish, Spanish,

Polish and Italian.

• First Audio: Some channels have more than one audio

language for choosing; by this function you can set the

first audio for this channel. If the playing channel has the

same audio as the “First Audio” you set, system will play

this audio language as default. If the channel hasn’t the

suited audio language, then the system will compare

automatically with second audio language. The selections of audio languages include: English, French, German,

Russian, Arabic, Portuguese, Turkish, Spanish, Polish and Italian.

• Second Audio: If the channel has no correspond audio with “First Audio” but have corresponded audio with

“Second Audio”, system will play the second audio language as default. If no audio language corresponds with the

“Second Audio”, then the default language of current channel will be played automatically. The selections of audio

languages include: English, French, German, Russian, Arabic, Portuguese, Turkish, Spanish, Polish and Italian.

4.2 TV System

• Display Mode You can select screen-displaying mode by using ◀▶ key

Options : Auto / PAL-M / PAL-N / NTSC.

Note) : If you accidently select “Pal-N” and the TV screen

may rolling continuously, press remote control

“mode” button to return “NTSC”.

• Aspect Mode

You can set TV aspect mode (4:3 Letter Box, 16:9, Auto, 4:3 Pan & Scan) by using ◀▶ key

• RF Channel

You can set it by using ◀▶ key (CH3, CH4)

Page 23

4.3 Local Time Setting

• Time Set Mode

You can select “TDT Auto” or “User Manual” mode by using ◀▶ keys.

• GMT Offset

This item is valid only when you select “TDT Auto” mode. You can press ◀▶ keys to switch “GMT” Offset” value,

and the range is “-12:00 ~ +12:00”, increase each half

hour progressively.

• Summer Time

This item is only valid when you select “TDT Auto” mode. When “Summer Time” is “On”, it will add one hour to

the time.

• “Date” and “Time” These items are valid only when the setting of “GMT Usage” is “Off”. You can press ◀▶ keys to moving highlight

and use number keys to input directly.

• If the current channel provides the correct time information, you will see the current time while you enter “Time”

menu. If the channel doesn’t provide time information, you have to input the date and time information manually.

• Press [Exit] key to draw back from “Time” menu.

4.4 Timer Setting

• You can press▲▼ key to select a timer, then press

[enter] key to open timer menu.

• Current time information will display on the first column;

if the current time is incorrect, please modify the time

information in “Time” item.

• Timer Mode: There are several modes for Timer to

setting, include Off, Once, Daily

• Wakeup Channel: press [OK] key to enter channel list

and select channel that you want to setting.

• Wakeup Date: use number keys to input your wakeup date.

• On Time: use number keys to input your wakeup time. Once the time’s up, no matter what the system is in standby

mode or in playing mode, the system will automatically switch to the channel you want and start to play.

Page 24

• Duration: After you set a time for “Duration” item, once the time’s up, the system will automatically switch to

standby mode. If you want not work this function, set the duration is 00:00.

• Move the highlight to “Save” button and press [OK] key to save timer. Select “Cancel” or press [Exit] key to cancel

the operation.

4.5 Parental Lock

• After selecting parental lock and entering the correct

password, the screen as shown in the middle appears.

The default password is “0000”.

• Menu Lock determining that when users wish to enter

“Edit Channel/Installation/Tools” menu, whether have to

input Password or not. If the setting of “Menu Lock” is

“Yes” which means user have to key in password, set “No”

means unlock.

• Channel Lock determining that when users wish to play the lock channels, whether have to input the password or

not. If the setting is “Yes”, play the channels with lock mark will show up a dialogue on the screen and ask for the

password. If the setting of “Channel Lock” is “No”, the Lock function will invalid.

• New Password is used for revising password; you can input the new password in this item by using number keys

directly. After you filled in 4 digit numbers, the highlight will auto skip to Confirm Password and ask you to input the

new password again. If the password is correct, the screen will show up a message of “Saving Data, Please

Wait…”. After finish saving and draw back to “System Setup” menu, the revising is complete.

• Press [Exit] key to draw back from the “Parental Lock” menu.

4.6 OSD Setting

You can adjust the OSD timeout, Transparency and Closed Caption by using ◀▶ keys.

Page 25

4.7 Favorite

When press [OK] key, you can rename the favorite

group’s name. It will display the dialogue.

•

Press [Red] key can switch whether capital or not.

• Press [Green] key can delete the character on the

cursor.

• Press [Yellow] key can save the modification.

• Press [Blue] key can cancel the operation.

4.8 Other

• LNB Power

If the setting is “On”, the receiver will supply power to

satellite antenna. If the setting is “Off”, the receiver won’t

supply power to satellite antenna.

• Channel Play type

You can select the “playing channels” as “Free”,

Scrambled” or “All”.

For Example: If you select “Free”, in full screen play, all

scrambled channels will be skipped when you change

channels by using ▲▼ key.

• Press [Exit] to draw back from “Other” menu.

5. System Tools

5.1 Information

Show the information of boot, main, dB code and back ground of STB.

Page 26

5.2 Factory Setting

Once the Factory setting is selected and chooses “Yes”

and type password by pressing 4-digit numeric keys

followed by OK key, whole parameters will be changed to

the default value written in the factory. If you do not

want to continue this mode, press [EXIT] key before you

enter password.

Common password is “0000”. In case selected password

is forgotten, call Pansat’s dealer to get factory master

password.

5.3 STB Data Transfer (Receiver to Receiver)

• Connect Null Modem RS 232 Cable (Pin #2 & #3

twisted) between master and slave receiver.

• Hook up the master receiver to the TV and select

transfer mode.

• Turn on the slave receiver power.

• Move highlight to “Start” on master receiver and press

[OK] key to start upgrade.

• Press [Exit] key to save the parameters and draw back.

Warning! Do not disturb data transfer by touching any Remote button, RS232 Cable, IF Cable, RCA Cable etc. during

data transfer period until “Please wait for saving” message disappeared. Interruption of data transfer could damage the

receiver’s Flash memory chip which makes the receiver dead and void warranty.

5.4 Download – USB

• Download - USB Mode has following options:

API_code, ChanData, All Data, All Data + Boot_code,

Sat&TP data, Background, Boot_code and Upload(All

Data Backup).

• User need put the upgrade file with under root of USB

memory stick. When users switch to the Download -

USB mode, “File” will show the corresponding file

• Select the mode and download file, then you can start

download by USB.

Page 27

5.5 Media Player

Media Play List will be served when USB plug in.

You can preview the picture at the top right corner if the

scroll bar is on the picture files (JPG, BMP), and show the

logo when at OGG file. Move scroll bar when press

▲▼ key, page up or down by page key. Go into sub-

directory when press ok key in the file directory, play the

selected file when scroll bar is on the file, automatic return

USB menu after play is over.

Color key operation:

[Green] key:

put the file selected by scroll bar to play list when press Green Key, in the meanwhile show “Add to Play List”, display

disappear after about one second, the file will be added into OGG play list if it is one OGG file, to Image play file for one

Image file.

[Blue] Key:

All the Image files in current directory are added into Image play list by Blue key, and screen display “Add to Play List”,

display will disappear after one second.

Music play operation

If you select music, and OGG play list menu is activated:

[Green] key:

Change play mode by Green Key, and play mode include: Sequential/Random/Single repeat/all repeat.

[Blue] Key:

Delete all the file by blue Key, but there is one remind “are you sure” before practical operation, if select Yes, all file will

be deleted, and close the Play list window

After begin to play OGG, it will show the OGG info bar as the above picture. Move the highlight to “PAUSE/PLAY” icon

and press OK key to pause. Press again to play. Move the highlight to “STOP” icon and press OK key to stop and

time return to 00:00. Move the highlight to “PREV” icon and press OK key to jump to the beginning of file list if play is

over 3 seconds; or jump to previous file if play less than 3 seconds. Move the highlight to “NEXT” icon and press OK

key to go to the next file. Move the highlight to “FORWARD” icon and press OK key to forward 20S. Move the

highlight to “BACKWARD” icon and press OK key to back 20S. Jump to beginning or end if less than 20S to the

beginning or end of music file. Return to USB file List when play is over or press Exit key.

Page 28

Image view operation

[Blue] Key:

Press Blue Key, will delete all image files in play list, but system will remind you “ Are you sure? ” before practical

operation, if you select Yes, all file will be deleted and Play list window will be closed.

[Green] key:

Press Green Key will show Setup Menu, please see the below setup menu:

• Size (Screen) select:

• Real： show the real size if the image size less than full screen size, but only partial image, the image is shown from

Left Top corner, don’t show for over part.

• Full：Full screen display and show real size if the image is less than screen.

• Menu Operation:

(1) Setup option

Press up/down key to move scroll bar, and switch option by Left/Right key, all option please see the below

table:

Item Option Default

Size Full/Real Full

Time 0~10Sec. 2

Repeat Off/On Off

(2) Save/Exit

Move scroll bar to Save icon, press OK for file save, select Exit and press OK, exit without save.

(3) Remark

When slide show image file list, press left or right key to go to previous/next image quickly.

6. Game

When you enter “Game” menu, you will see Games include Tetris, Othello and Sudoku.

6.1 Tetris

• Moving highlight to “Setup” and press ◀▶ key to select

the game level (speed).

• Moving highlight to “Start” and press [OK] key to start the

game.

• Moving highlight to [Cancel] keys and press [OK] key to

draw back from the game.

• Start on the game:

◀▶ Move shape left or right

Page 29

▲ Rotate clockwise

▼ Faster drop

[OK] Pause/Play the game

[Exit] Quit game

6.2 Othello

• Moving highlight to “Setup” and press ◀▶ keys to

select the game level (degree of difficulty).

• Moving highlight to “Start” and press [OK] key to start the

game.

• Moving highlight to [Cancel] key and press [OK] key to

draw back from the game.

• Start on the game:

◀▶

▲▼ use these arrow keys to guide chessman.

[OK] set chessman.

[Exit] Quit game

6.3 Sudoku

7. USB

You can find information for HDD and PVR setting in this USB menu.

7.1 Record Manager

You can play recorded contents as follows ;

• Press [Play] key to preview.

• Press [OK] to play the recorder in full screen..

• Press [Pause] key to pause.

• Press [Pause] key repeatedly to realize the step

function.

• Press [FF] / [FB] key to fast forward or fast backward

x2 x4 x8 x16 x24.

• Press [Slow Forward] / [Slow Backward] key to slow

forward or slow backward x1/2 x1/4 x1/8.

Page 30

7.2 HDD Information

You can enter to this menu to confirm HDD information

7.3 HDD Format 7.4 PVR Setting

You can format HDD in this menu as above picture.

7.4.1 Timeshift

You can use “Timeshift” function in this menu. The

option is “On/Off”.

If you set timeshift “On”, it will record the current channel

you watch automatically. Then you can press [Pause] /

[Fast Backward] / [Slow Backward] key to watch the

previous program. If timeshift is “Off”, this function

doesn’t work. You can press [info] key to confirm

recording status.

Page 31

7.4.2 Jump

You can enter “Jump” menu. The option is “30 second, 1 min, 5 min, 10 min, 30 min”. When you watch the HDD

record program, press [PREV] / [NEXT] key to jump the step that user set.

7.5 USB DISK STATUS 7.6 USB Port

You can find HDD DISK STATUS and can play it in full screen by using [OK] key.

You can select one of Front or Rear USB port in this menu by using ◀▶ keys.

8. Channel List

▪ You can see the channel list as shown in the above

figure by pressing OK key

▪ To watch another channel, move the cursor to the

channel you want by using ▲▼ PG↑ PG↓ and press [OK]

key

▪ If favorite channels are saved, the list is changed from

channel list TV to favorite list.

▪ Pressing [TV/RADIO] key changed list Radio, you can

exit from the list menu by pressing [EXIT] key.

Page 32

9. Program Guide

▪ The title and start time of the program is shown as in the

right figure after pressing [EPG] key.

▪ Select the particular channel

. The channel will be

changed.

▪ If you want to watch TV with full screen, Press EXIT.

10. Audio change

▪ In multilingual program, favorite language is selected by

pressing [AUDIO] key and▲▼ key

▪ Audio mode (L-left, R-right, L/R-stereo) can be changed

by pressing [AUDIO] key and key.◀▶

11. Multi Pictures

▪ Press and select the Multi Picture mode that you

want.

▪ Move the cursor and select one picture to play

Page 33

12. Recall the Favorite channel

▪ Press [FAV] key to recall a stored favorite channel.

▪ Favorite channel is programmed and stored in the

Favorite Edit menu.

3. Optional Items

3.1 UHF Remote Control Kit (Optional)

Page 34

3.2 Universal III Remote Control (Optional)

Key Function

Turns the equipment on/off

TV/SAT

Toggles between TV & SAT operation

Changes channel directly.

Controls the numerical operation.

Input the alphabet in the name edit screen

HDD

Enter Hard Disk menu

Mute

Select mute mode

STB

Select STB mode

AUX

Select Aux mode

Video Input

Select Video Input mode

Select TV mode

Audio

Select audio mode

Shows channel information

TV/RAD

Toggles between TV and Radio operation

PAUSE

Holds the picture or release the pause

EPG

Shows program information

LAST

Returns to previous program

Enters main menu screen. Or exits menu screen

Execute page up function in the menu

Execute page down function in the menu

EXIT

Moves to upper menu

Channel up/down

Moves the cursor upward/downward in the menu screen

Shows Channel list. Confirms selection

Volume down/up

Change the value of a selected line

MODE

Select video resolution (480, 720, 1080 i)

SIG

Shows signal / quality level

Multi Picture (Max 9 CH)

TIME

Shows current Time

Page 35

Operating Principle

▪ Select an item by using up and down key and change the value of the highlighted (selected) item by using keys shown

on the screen. Press OK to enter to the sub-menu if there is no instruction marks on the screen.

▪ The item is automatically stored and moved the upper menu by pressing the ‘EXIT’ key

▪ You can return to normal mode at any time by pressing the menu key from the menu mode

Universal Remote Interface Programming

A) Manual Code Input Method

1. Turn the TV set power on.

2. Press remote TV button for 5 seconds until TV button LED red light on.

3. While LED red light on (within 10 seconds), aim remote to the TV set and enter 3 digit code in the list.

If the code is a matched one, red light will flash 3 times and the TV set power will be turned off automatically. If red

light does not flash, try another 3 digit code one by one.

4. For other AUX products, follow same as above steps.

B) Automatic Code Search Method

1. Turn the TV set power on.

2. Press remote TV button for 5 seconds until TV button LED light on.

3. While LED red light on (within 10 seconds), aim remote to the TV set and press and release UP( ▲ ) button and wait

3 seconds. If auto search code is a matched one, red light will flash 3 timesand the TV set power will be turned off

automatically.

If no response within 3 seconds, press and release UP( ▲ ) button again and wait 3 seconds for another code search.

Continue this procedure until you get the response.

4. For other AUX products, follow same as above steps.

Custom Code Programming

When the remote control interfering TV (AUX) set at “STB” operation position, program another code among 3 different

codes to avoid the problem.

Press OK and number 2 (or 3) button simultaneously about 5 seconds until STB button red light flash 3 times.

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

4. SPECIFICATION

Satellite Tuner 1RF Input Connector F-type,IEC169-24 1RF output(loop through out) F-type,IEC169-24 Frequency Range 950MHz to 2150MHz Input Level 65 dBm~-25 dBm LNB Power 14V/19V (500mA Max) Symbol Rate 1 to 45Msps.(SCPC,MCPC) DiSEqc Diseqc 1.2 & USALS Compatible Band Switch 22KHz tone Demodulation QPSK

MPEG transport Stream A/V Decoding

De multiplex MPEG-2 ISO/IEC 13818-1(MPEG-2 system) Input stream Max. 90Mbit/s Aspect Ratio 4:3(default), 16:9 letterbox

Video Decoding

ISO/IEC 13818-2(MPEG2 vidoe) MP@ML,

720 x480(NTSC),720x576(PAL)

Audio Decoding ISO/IEC13818-3(MPEG2 audio/MUSICAM) Video Output Component(YPbPr),CVBS Audio Mode Single Channel /Dual Channel, Stereo, Joint Stereo Audio Sampling Frequency 16/22.05/24/32/41.1/48 KHz Microprocessor & Memories CPU Clock 216MHz

Flash

Memory

4 Mbyte

SDRAM 32 Mbyte(133MHz ) A/V output Component Jack Y, Pb ,Pr Video RCA 1 output Audio RCA 2 output(Reft,Right) Digital Audio 1 coxial output S/PDIF RF Modulator Connector F type,IEC169-24 Frequency CH3(61.25MHz) ,CH4(67.25MHz) TV Standard NTSC Output Channel CH3-4

Page 42

Front Panel Display 4Digits LED

8 keys

Power, Channel Down/Up, Volume up/down, Menu,

Exit, OK

USB USB2.0 1 Host Data port

Connector 9 pin D-sub Type Protocol RS232 Asynchronous Data Rate Max. 19.2Kbps

Rear Panel Tuner 1 input with loop through out UHF Stereo Jack 4RCA Video, Audio L, Audio R, SPDIF Component Jack RCA Jack(Y,Pb,Pr) USB 1 Host RF Modulator IEC 169-24(Ant IN, TV out) Data Port RS 232 Power Switch Rocker Type Power cord Fixed type on the body Remote Control Type IR RCU Battery 2x1.5V AAA Type Power Supply

Input Voltage AC 90-250V, 50/60Hz Power Consumption Max. 18 Watts Type SMPS(Switching mode power supply)

Physical Specification Dimension (W x D x H) 260x150x45mm Weight 1.5kg Accessories RCU, Battery, User manual

Page 43

5. TROUBLE SHOOTING

There may be various reasons for the abnormal of the unit. Therefore, if the unit does not work properly,

Check the unit according to the procedures shown in the table below.

Problem Possible causes Remedy

LED on front panel

Does not light

AC Power cord disconnected Connect power cord properly into the

power socket

No Picture or Sound

Wrong connection of the

Video/audio output to TV input

Terminal

Wrong connection of antenna

cable

Wrong direction of antenna

No signal or weak signal

Wrong setting of channels

Information in MENU screen

Connect two terminals correctly

with component cable, RCA or RF

cable

Connect the antenna cable

Correctly

Adjust the direction of antenna

Check the cable connections,

Type the setting value correctly

Black-and-white

Screen or V-Hold

Your TV mode is different from

broadcasting mode

Use TV of same mode

Use the NTSC/PAL converter

Connection to the receiver and TV

The remote controller

is not working

Battery exhausted

Fluorescent light interfering with

the remote controller

Remote controller is incorrectly

aimed

Change the batteries

Switch off the light

Aim the remote control at the

receiver

Distorted menu

screen

Too high brightness and contrast

level of TV set

Adjust brightness and contrast to low

level

Not working

Process Down Remove the power code or

AC switch OFF/ON

Page 44

Panarex Electronics 4500 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual