Page 1
MAX 4400-20A
®
Component Style, 20Amp Power Distribution / Protection
MAX 4400-20A
®
20 Amp Current Capacity - installation
flexibility.
Inductorless Noise Filtration - provides clean, capacitive filtered power to amplifiers without current
limiting components (inductors) which impede performance.
One Front Panel Convenience Outlet - for temporary power connections.
Four Always-On Outlets - for equipment that requires continuous power.
Four Switched Outlets - controlled by either the front panel switch or DC voltage trigger. A Turn-On
delay switch provides a0or 10 second delay for switched outlets.
$299 SRP
Optional Silver Front Bezel Available
receptacles accept either 15 or 20 Amp equipment plugs for
DC Voltage Trigger - a standard 3.5mm mini-plug jack allows external control of startup/shutdown
sequencing.
Automatic Voltage Monitoring (AVM) Circuitry -
power for under or over voltage conditions. Power to the connected equipment is automatically turned off
if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is
automatically reconnected.
Grounding Lug - provides a common grounding point for equipment with separate ground.
Optional Silver Front Bezel Available - (Part# BEZ4400-S) $39.00 SRP
AC SPECIFICATIONS
zH06/05,CAV021:egatloVeniL
Maximum Current Capacity: 20 Amps
Protection Modes L-N, L-G, N-G
UL 1449 Suppression Rating: 330V
0561:gnitaReluoJ
Peak Impulse Current: 52,000 Amps
Initial Clamping Level: 141 RMS / 200 Peak
Response Time: <1ns
EMI/RFI Noise Filtration: 50dB (100KHz – 1MHz)
Catastrophic Surge Circuit: Yes
Thermal Fusing: Yes
Overvoltage Shutoff: 147VAC +/- 8VAC
Undervoltage Shutoff: 84VAC +/- 6VAC
AVM circuitry continuously monitors the incoming
ack-Mounting
Brackets
Includes R
DC TRIGGER SPECIFICATIONS
Connection: 3.5mm mini-plug
Voltage and Polarity: 5-30VDC, bi-directional
Current Requirement: <10mA
L488 Rev.B
4/08
Loading...