Pg. 4
der certain public telephone exchanger or PABX.
2. MUTE
When you are in conversation, but you don`t want the other side hear
you, you can press MUTE and hold it.The function will be off when
you release it.
3. FLASH
When there is an engaged tone or a wrong number, you can press
FLASH key to hang up and make the next call.
4. REDIAL
In the case of engaged tone or no answer, you can press REDIAL key
to redial the destination number automatically.
5. P/T
Before the phone is put in service, you can turn the dialing mode
switch to P or T position to be set in accordance with the dialing
method used by your local public telephone exchanger: P(pulse):
pulse dialing, T(tone): dual-tone multi-frequency dialing(DTMF).
6. RINGER
Slide the “RINGER SWITCH” to ‘LO’ or ‘HI’ or ‘OFF’ position you can
adjust the VOLUME OF THE RINGER.
7. TEMPORARY TONE DIALING MODE
For rotary or pulse service users,press ‘*’ to change to tone dialing
mode.You can enter numbers to acsess answering services,electronic
banking services,etc.When you hang up,the mode will return to
pulse.Access numbers entered after pressing ‘*’(TONE) will not be
include when redialing.
NOTICE
1. Install and use the telephone under the guidance of the professional of the telecom.
2. You can use the groove under the telephone if you wan to hang
it on the wall.
3. Place the telephone in the place of clean and dry and without
corrosive gas.
4. Avoid concussion and collision.
5. Please contact the local telecom or our company when there is
something wrong with the telephone.