Panacom BL-1360HS User Manual

BL-1360HS User Manual

BL-1360HS Manual del Usuario

Pg. 3

BL-1360HS - USER MANUAL

Thanks for purchasing PANACOM BL-1360HS. Please read this manual carefully
before using the headphone, which is the best guideline offering best service.

GETTING STARTED

• Remove the Bluetooth stereo headset & accessories from the box.

• Remove all packaging from the Bluetooth stereo headset.

• Place the packaging inside the box to either store or dispose of safely.

IN THE BOX

• Bluetooth Wireless Headset

• AUX Cable

• USB Charging Cord

• Instruction Manual

FEATURES

• Enjoy music wirelessly

• Easy to switch between calls and music

• Answer & end a call at click of a button.

• Redial last number

• Voice Dial

• Volume Control

• Media Control (pause/play)

• Every time its turned on, it connects to last connected device automatically

Pg. 4

SAFETY INSTRUCTIONS

-Keep the unit away from heat sources, direct sunlight, humidity, water and
any other liquids.

-Do not operate the unit if it has been exposed to water, moisture or any
other liquids to prevent against electric shock, explosion and/or injury to
yourself and damage to the unit.

-Do not use the unit if it has been dropped or damaged in any way.

-Repairs to electrical equipment should only be performed by a qualied
electrician. Improper repairs may place the user at serious risk.

-Do not use the unit with wet hands.

-Do not put objects into any of the openings.

-Keep the unit free from dust, lint etc.

-Do not use this unit for anything other than its intended use.

-Keep the unit out of reach of children.

-This product is not a toy.

-Do not use the handset at excessive volume levels, as damage to hearing
may occur.

Description of Parts

Pg. 5

1. Foldable and Retractable Headband

2. “-” button: Decrease Volume

3. Short press“<” button: Previous Track; Long press “<” button: Fast

backward in Bluetooth mode

4. Short press “>” button: Next track; Long press “>” button: Fast forward
in Bluetooth mode

5. Built-in Microphone

6. LED Indicator

7. Multi-function button (MFB): Power on/power off/answer a call/end a call/

reject a call/redial last number/pause/voice dial/play/switching between
lines (three way calling)

8. “+“ button: Increase Volume

9. Charging Slot

10.3.5 mm Aux-in jack

INSTRUCTIONS FOR USE
Charging Instructions

The headset come with a built in rechargeable battery. Before using it for the
rst time we recommend you charge the battery fully. Only use the supplied
USB Cord to charge the headset.
Connect the USB cable to a computer USB port and the Micro USB plug to
the charging slot of the headset. The Red LED illuminates while the headset
is charging. It takes around 3 hours for the unit to fully charge. When the
battery is fully charged the LED will glow off.

Note: When the headset is charging, it will auto off the headset. You can
turn on the headset if you want to use the headset and charge it at the
same time.

Pg. 6

Turning on/off the headset

Power on: Press and hold the MFB button for 2-3 seconds until the LED
ashes blue.
Power off: Press and hold the MFB button for 3-5 seconds until the red LED
stops ashing.

Pairing the headset with Bluetooth devices (phone or music device)

Ensure the headset is turned off, then press and hold the MFB button for 3-5
seconds until the LED ashes red and blue. Place the headset and Bluetooth
device (phone or music device) so that they are no further than 1 meter apart.
Activate the Bluetooth function on your Bluetooth device (phone or music
device). Please refer to the manufacturer’s instructions for instructions on
enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the headphones “BL-
1360HS” from the list of available Bluetooth devices.
If required, enter the password ‘0000’ to conrm & nalize pairing.
Once paired successfully, beep sound will be heard and the LED ashes
blue quickly for a few times while paired.
You can now start to use the headset.
Please note pairing mode on the headset will last for around 2.5 minutes. If no
devices are paired within around 2.5 minutes the headset will automatically
return to standby mode.
If pairing is unsuccessful, turn off the headphones rst and then re-pair
following the above steps.
Once you have paired the headset with a device, the headset will remember this
device and will pair automatically when the device’s Bluetooth is activated and in
range. You do not need to re-pair any previously connected devices.
The headset will attempt to automatically connect to the last device it was

Pg. 7

paired with when switched on. If you want to pair it with a new device please
follow the steps outlined above.
Once the headset are paired with your device the music will transmit
directly to the headset. Please refer to your device’s user manual for further
information.

FUNCTION SUMMARY
Listening to Music

Once the headset is paired with your device you can stream music wirelessly
to the headphones. Select the track you wish to listen to and it will be
streamed to your headphones. Should you encounter any problems while
streaming please refer your device’s user manual for further information.

BASIC OPERATIONS

Increase Volume: Press on the + button once
Decrease Volume: Press on the - button once
Pause: Press on the MFB button
Play: Press on the MFB button
Previous track: Press on the < button. Long press < will fast backward
Next track: Press on the > button. Long press > will fast forward
NOTE: Some above functions only can be used in Bluetooth mode only.
An indication tone will alert you when the volume is adjusted to the maximum
or minimum level.

MAKING A CALL WITH THE HEADSET

Answer A Call: Press the MFB once
Reject a call: Press and hold the MFB button for 2 seconds
End a call: Press the MFB button

Pg. 8

Increase Volume: Press on the + button once
Volume down: Press on the - button once
Voice dial: Press and hold the MFB button for 2 seconds
Redial last number: Press the MFB button twice

THREE-WAY CALLING

Put the call on hold and answer a new incoming call

Press and hold the MFB button to switching between the phone calls

End current call and answer a new incoming call

Press the MFB button once
NOTE: It only support if your mobile phone services support Three-way
calling.

AUX FUNCTION

Connect the 3.5 mm aux cable into the Aux jack of the headset. The other
end of the cable connect to the 3.5 mm jack of your mobile phone / computer
/ audio devices.
When incoming call, pick up / end a call by the mobile phone, you can use
the headset for phone conversation.
NOTE: Bluetooth mode is disconnected.

Warning: Excessive noise from earphones and headset can result in hearing loss.

LED INDICATOR

Please refer to the below lists for a list of the LED statuses whilst using the
headphones.