Pamex KAWR1S, KAWR1N User Manual

Pamex

Kapture Series

A Multi-Family Door Access Control Solution

User Manual & Implementation Guide

1

Table of Contents

Introduction 4

Before Installation 6

Check List 6

Pamex MFSP Service Platform 6

Hardware Installation 6

Wall Reader - Kapture KA-WR1S, Kapture KA-WR1N 7

Features 7

Hardware Specifications 7

Front View 9

Back View 10

Wiring Pigtail Rated note 11

Basic Door Installation 12

Basic Door Installation Wiring 13

Solid-State Output 14

Surface Mounting 15

Mounting to single gang recessed outlet box 16

Dimensions 17

Installation Guide 20

Deadbolt - KA-D7P1A (Auto) 24

Features 24

Hardware Specifications 24

Product Photo 26
Dimensions (內外機) 27

Installation Guide 28

Deadbolt - KA-D7P1S (Semi-Auto) 29

Features 29

Hardware Specifications 29

Product Photo 31
Dimensions (內外機) 32

Installation Guide 33

Leverset - KA-LNP5C 34

Features 34

Hardware Specifications 34

Product Photo 36
Dimensions (內外機) 37

Installation Guide 38

Interconnected - KA-INP35A 39

Features 39

2

Hardware Specifications 39

Product Photo 41

Installation Guide 42

Interconnected - KA-INP35S 43

Features 43

Hardware Specifications 43

Product Photo 45

Installation Guide 46

Implementation Guide 47

Concepts 47

Construction Phase 48

Lock Registration Phase 49

Plan your area tree 50

Build the area tree using MF-Admin Server 51

Plan your programming cards 54

Setup Wifi AP and Create Programming Cards 56

Register Locks to MF-Admin Server 59

Verify lock registration using Master Card 61

Go-live Phase 66

Create Tenant Cards 76

Create Staff Card 83

Create Vendor Card 88

Create Guest/Temp Card 95

Shutdown Public Area 100

Area Time Control 100

Lock Scheduling 102

Access Control Rule 105

Time Control - Add/Remove Holidays 107

Advanced Setup Guide 109

Lock Report Interval 109

Alert Settings 111

Appendix 113

Lock UI Patterns (LED & Buzzer) 113

Wall Reader 113

<<Leverset, Deadbolt>> 114

Wifi AP Specification and Settings 115

Factory default settings - Wall Reader 116

Factory default settings - Deadbolt 117

Factory default settings - Leverset 118

Factory default settings - Interconnect 119

MF-Admin Server Parameters default settings 120

3

Application Parameters 120

System Parameters 120

Mifare Card Specification 121

Card Types 122

Area Types 123

Lock Real Time Events 125

Default Severity of Alert Types 126

FCC Statement 127

NCC Statement 128

4

Introduction

The Pamex Kapture series is a total solution for multi-family door access control. It not only has
several models of lock but also the browser based central management system (MF-Admin server).

Figure 1 : Pamex Kapture System Architecture Overview

Figure 1 shows the system architecture of Pamex Kapture solution, Below are the brief
description of each components :

1. Chrome browser : The user interface to the MF-Admin Server (2). You need a PC
with Chrome browser to use MF-Admin. The card reader/writer (No.6 in figure 1) will
be connected to this PC using USB. You may also use the windows server (5) as the
client PC.

2. MF-Admin Server : An application running on Windows server (5). It provide all the
functions to manage the access control of the locks and the cards/fobs.

3. Wifi AP : All the Kapture locks has the wifi capability and are necessary to connect to
a wifi AP in order to be programmed by MF-Admin server. There should be a few to
many Wifi APs at a multi-family property. Wifi AP is not part of Kapture products.
Check the lock specifications in Appendix for the compatible Wifi AP.

4. Kapture smart locks and NFC cards : All the Kapture locks are smart locks which are
accessed using NFC card/fob (Mifare Desfire).

5. Windows Server : MF-Admin server is installed on this server.

6. Card Reader/Writer : MP100 is the default reader to issue new card/fob to
users/residents.

5

Figure 2: MP100

7. DB Server : A database is installed on windows server to keep all the data of the
system. It is installed and automatically configured by the install program. Please
reference MF-Admin & MP100 installation guide .

8. MFSP platform : MFSP (Multi-Family Service Platform) is a cloud service for all the
MF-Admin Servers around the world. This platform is operated by Pamex. Connected
your MF-Admin Server to MFSP is not required but we encourage you to do so.
MFSP will provide some enhancement to Kapture solution in the future.

6

Before Installation

Check List

● Locks

● Cards : Crypto Cards x 2, Construction Card x 5, Blank Cards x 10

● MF-Admin + MP100 Software

● MP100 Card Reader x 1

● Windows Server x 1

Pamex MFSP Service Platform

● This section is for Pamex only.

● Before any Kapture installation, Pamex admin will have to create a project in
MFSP in order to get the unique project code.

● A Kapture installation will need at least one Crypto card to activate all the
locks. Crypto card can only be issued through MFSP by Pamex. MFSP will
keep the encryption keys of Mifare Desfire card for every projects.

7

Hardware Installation

Wall Reader - Kapture KA-WR1S, Kapture KA-WR1N

Features

● IP55 Weatherproof suitable for external use

● Advanced tamper detection

● Wi-Fi enabled access controller connected directly to existing routers

● Lock and unlock lockset remotely (Wi-Fi)

● MIFARE DESFire EV1/EV2 credential required (sold separately)

● High-Security authentication with 128-bit AES Encryption

● 6000+ cards/fobs and 10,000 activity logs memory capacity

● Alert email notification

● Access time control for both areas and users

● Passage mode – temporarily allow unrestricted access

● Privacy mode – temporarily disable all user access

● Lockout functionality

● Dual LED Status Indicators for Visual communications

○ Bi-color LED Status Indicator(red, green)

● Customizable I/O

○ Main relay, Auxiliary relay
○ REQUEST-TO-EXIT input
○ DOOR SENSE input
○ ALARM SHUNT signal x 2

● UL294(US), FCC Certification (US)

● Remote configurable using MF-Admin server

Hardware Specifications

Mechanical (Dimensions)

Kapture KA-WR1S : 5.51” (H) X 2.95” (W) X 1.27” (D)
Kapture KA-WR1N : 7.45” (H) X 1.77” (W) X 1.28” (D)

Electrical

● NFC reader

● Supports ISO/IEC 14443 A/MIFARE and EV1/EV2 desfire

Operating distance in Read/Write support Max. 2cm

● WIFI 11.b/g/n

Operating distance support 100feets

8

● Input Voltage: 12/24 Volts DC, 25VDC Absolute Max. rating
Operating Current: 30 mA typical, 150 mA max

Output Ratings

● Main Relay: Form “C” 2 Amps @ 28 Volts max

● Auxiliary Relay: Form “C” 2 Amp @ 28 Volts max

● Electrical life Min. 100,000 operations at 2A resister load

● Electrical life Min. 1,000,000 operations at 1A electrical lock

● Solid state outputs (Outputs P3.E7 & P3.E6)

● Short-to-common 100 mA @ 24 VDC maximum

Environmental

● Temperature: -31°F to 150°F (-35°C to 66°C)

● Humidity: 95% Non-condensing

9

Front View

Figure 3 : Kapture KA-WR1S Front, Kapture KA-WR1N Front

10

Back View

Figure 4: Kapture KA-WR1S Back, Kapture KA-WR1N Back

11

Wiring Pigtail Rated note

Figure 5: Kapture KA-WR1S, Kapture KA-WR1N Wiring Pigtail Rated note

12

Basic Door Installation

Figure 6: Kapture KA-WR1S(N) Basic Door Installation

13

Basic Door Installation Wiring

Figure 7:Kapture KA-WR1S(N) Basic Door Installation Wiring

14

Solid-State Output

Figure 8 : Kapture KA-WR1S(N) Solid State Output

15

Surface Mounting

Figure 9 : Kapture KA-WR1S(N) Surface Mounting

16

Mounting to single gang recessed outlet box

Figure 10 : Kapture KA-WR1S(N) MOUNTING TO SINGLE GANG RECESSED OUTLET

BOX

17

Dimensions

Figure 11 : Kapture KA-WR1S Front

Figure 12: Kapture KA-WR1N Front

18

Back

Figure 13: Kapture KA-WR1S Back

19

Figure 14: Kapture KA-WR1N Back

20

Installation Guide

Kapture KA-WR1N

1) Screw the back plate to lock base with three 4mm*12mm self-tapping screws. See
picture below.

2) Place the waterproof rubber on the back of the Wall Reader. See picture 1&2.

21

3) Before fastened Wall Reader, please ensure the waterproof rubber is installed.
Align the hole with the hook on the top of back plate. See picture 3,
Push down the Wall Reader. See picture 4.
Tighten up the Wall Reader with a 4mm*8mm screw. See picture 5.

22

Kapture KA-WR1S

1) Screw the back plate to switch box with two 4mm*12mm self-tapping screws. See
picture 1&2.

2) Place the waterproof rubber on the back of the Wall Reader. See picture 3&4.

3) Before fastened Wall Reader, please ensure the waterproof rubber is installed.
Align with the hook on the top of back plate. See picture 5.

23

Pull down the Wall Reader. See picture 6.
Tiighten up the Wall Reader with one 4mm*8mm screw. See picture 7.

24

Deadbolt - KA-D7P1A (Auto)

Features

● Easy installation with a Philips screwdriver

● Hidden(tamperproof) emergency mechanical key override & Tamperproof Detector

● Battery operated with over 1 year battery life

● Low battery warning

● ANSI/BHMA Grade 2 Certified

● IP55 Weatherproof suitable for external use

● Wi-Fi enabled access controller connected directly to existing routers

● Lock and unlock lockset remotely (Wi-Fi)

● MIFARE DESFire EV1/EV2 credential required (sold separately)

● High-Security authentication with 128-bit AES Encryption

● 6000+ cards/fobs and 10,000 activity logs memory capacity

● Alert email notification

● Access time control for both areas and users

● Passage mode – temporarily allow unrestricted access

● Privacy mode – temporarily disable all user access

● Lockout functionality

● Dual LED Status Indicators for Visual communications
○ Bi-color LED Status Indicator(red, green)

● UL Certification, FCC Certification (US)

● Remote configurable using MF-Admin server

Hardware Specifications

Electrical Specification

● Wi-Fi enabled lock connected directly to existing routers

● Frequency – 13.56 MHz RFID

● Read Range – Proximity: 1.5cm (ISO14443A Card); MIFARE DESFire

EV1/EV2

● Power Supply – 4 AA batteries (up to 1 years)

● Voltage: 6V

● Dual LED Status Indicators for Visual communications

● Bi-color LED Status Indicator(red, green)

● Communication standards – 2.4 GHz Wi-Fi (IEEE 802.11b/g/n), WPA2,

Transport Layer Security (TLS) version 1.0

● Communication range – up to 100 ft.

● Data rate – 24M bps via Wi-Fi

Mechanical Specification

● 3-Hour UL Fire-Rated, Grade 2 ANSI/BHMA certified

25

● Dimension (W*H*D) :

○ Exterior lock body: 70 x 160 x 28 mm
○ Interior lock body: 75 x 204 x 30 mm

● Square Corner Faceplate : 1-1/8” x 2-3/4”

● Cylinder : 5-pin KW keyway standard, other options available

● Door Thickness : 1-3/8"(35 mm) to 2"(51 mm)

● Bore: 2-1/8"(54 mm) or 1-1/2"(38 mm)

● Backset: Adjustable backset, fits 2-3/8"(60 mm) and 2-3/4"(70 mm)

backsets

● Finish : Two-tone Black and Silver

Operating Temperature

● Exterior Side: -35℃ to 66℃

● Interior Side: -10℃ to 50℃

● 5% to 95% relative humidity (non-condensing)

26

Product Photo

<< Mark >>

27

Dimensions (內外機)

<<Mark>>

28

Installation Guide

29

Deadbolt - KA-D7P1S (Semi-Auto)

Features

● Easy installation with a Philips screwdriver

● Hidden(tamperproof) emergency mechanical key override & Tamperproof Detector

● Battery operated with over 1 year battery life

● Low battery warning

● Door handles reversible by a ring-shaped switch

● ANSI/BHMA Grade 2 Certified

● IP55 Weatherproof suitable for external use

● Wi-Fi enabled access controller connected directly to existing routers

● Lock and unlock lockset remotely (Wi-Fi)

● MIFARE DESFire EV1/EV2 credential required (sold separately)

● High-Security authentication with 128-bit AES Encryption

● 6000+ cards/fobs and 10,000 activity logs memory capacity

● Alert email notification

● Access time control for both areas and users

● Passage mode – temporarily allow unrestricted access

● Privacy mode – temporarily disable all user access

● Lockout functionality

● Dual LED Status Indicators for Visual communications
○ Bi-color LED Status Indicator(red, green)

● UL Certification, FCC Certification (US)

● Remote configurable using MF-Admin server

Hardware Specifications

Electrical Specification

● Wi-Fi enabled lock connected directly to existing routers

● Frequency – 13.56 MHz RFID

● Read Range – Proximity: 2 cm (ISO14443A Card); MIFARE DESFire

EV1/EV2

● Power Supply – 4 AA batteries (up to 1 years)

● Voltage: 6V

● Dual LED Status Indicators for Visual communications

● Bi-color LED Status Indicator(red, green)

● Communication standards – 2.4 GHz Wi-Fi (IEEE 802.11b/g/n), WPA2,

Transport Layer Security (TLS) version 1.0

● Communication range – up to 100 ft.

● Data rate – 24M bps via Wi-Fi