Palsonic TFTV765 User Manual

OWNER'S MANUAL
76CM CORDLESS REMOTE LCD TV/MONITOR
MODEL: TFTV765
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
Contents
Congratulations on your purchase of this Palsonic LCD TV. We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
Contents ...........................................
Important Safety Cautions ..............
Identification of controls .................
Front ...........................................
Back ............................................
Remote control ...........................
Battery installation ......................
Effective remote range ...............
Installation ........................................
Antenna installation/
Adaptor connection .....................
Connecting video/audio
equipment ...................................
Connecting DVD player and
speaker .......................................
Connecting YPbPr terminals ......
Connecting VGA interface ..........
Elevation adjustment ..................
Menu introduction ............................
Turning On/Off ..................................
Turning On ....................................
Turning Off ....................................
Selecting input signal ....................
Channel Preset .................................
To enter into CHANNEL
SETTING menu ..........................
Auto Search ................................
Manual Search ...........................
Fine tuning ..................................
Channel Skipping .......................
1 2 4
4 5 6 7 7
8
8 9 10
11 12 13
14 16
16 16 16
17
17 17 17 17 18
Channel edit ...............................
Channel Select ...............................
Picture Adjustment ........................
Sound ..............................................
System Setting ...............................
To enter into SETUP menu ........
Colour system ............................
Sound System ............................
Setting OSD Language ..............
Setting OSD position ..................
Setting OSD Background ...........
Seeting ZOOM Mode .................
Timer ...............................................
Use SLP button ..........................
Use CLK button ..........................
Adjustment in YPbPr mode ..........
To enter into YPbPr mode ..........
Adjusting picture .........................
Adjusting horizontal/vertical
position .......................................
Adjustment in PC mode ................
To enter into PC mode ...............
PC signal format .........................
Use AUTO ADJ. button ...
Adjusting bright and contrast ......
Adjusting phase and frequency ..
Adjusting Colour temperature .....
Trouble Shooting ...........................
Specifications ................................
18
19 20 21 22
22 22 22 22 23 23 23
24
24 24
25
25 25
25
26
26 26 26 27 27 27
28 29
1
Important Safety Cautions
When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.
Water and moisture - Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.
Heat sources - Keep the product away from heat sources such as radiators heaters, stoves other heat generating products (including amplifiers). requirement of environment temperature;
-200C~500C for storage; 00C~400C for working.
The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the the manufacturer's instructions are followed.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a trolley, stand, tripod, and bracket or table recommended by the manufacturer or sold with the product.
2
This TV set can be operated on a power of ~240V 50Hz. You must not use a power supply of any other type.
When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.
The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. Power supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. If the power cord or the plug is damaged contact a qualified service department for service.
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.
High Voltage exists in this TV set. Do not remove the cover. In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.
Don't try to push anything into the cabinet or place any vessel with water on the TV set.
For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.
3
Identification of controls
Front
Remote sensor Indicator
To enter into MENU
To select input signal
Channel up
Channel down
Volume down
4
Volume up
Power on/Standby
Back
Video input
S-video input
DVD inputs
VGA input
HDTV YPbPr inputs
Antenna input
DC input
Earphone jack
PC audio
line in Speaker outputs
5
HDTV Audio inputs
Audio inputs
Identification of controls (continued)
Remote Control
Power on/Standby
Volume down
To enter into MENU
Colour/Sound system select
Zoom select
Auto correct picture
Picture mode select
Channel select
Input signal select
Sound Mute Channel up
Volume up Channel down
To exit OSD menu
Sleep timer Clock/Timer setting
Previous channel
On-screen display
/
Still picture
OSD position select
Adjusting Bass
Adjusting Treble
6
Please install the batteries before using the remote control unit.
Open the battery cover.
Install two "AAA" batteries matching the +/­polarities of the battery to the +/- marks.
Effective remote rangeBattery installation
5m
POWER
CH
VOL
VOL
-
+
CH
ENTER
MENU
C.SYS
SLP
CLK
ZOOM
P.M
AUTO.ADJ
DSP
3
1
2 5
6
4
9
8
7
-
/
AV
--
0
OSD
Treb+
STILL
Bass+
POSITION
Bass -
Treb-
Replace the battery cover.
Notes:
When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. Do not throw the batteries into a fire. Dispose of used batteries in the specified manner. Do not drop, dampen or disassemble the remote control.
Notes:
There should be no obstacle between the TV and the transmitter. Use the remote control within the effective range as the above figure. If the remote control does not work, please check whether the batteries are exhausted or the polarity is wrong. When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the TV the remote operation may be unstable.
7
Installation
Antenna installation/Adaptor connection
Before using this equipment, please connect the AC power adaptor correctly. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.
AC power adapter
Notes:
Turn off the power firstly when you connect a outdoor antenna to the Antenna input terminal. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal. In thunder and lighting weather, please disconnect the outdoor antenna to avoid thunder/lighting strike.
8
Connecting video/audio equipment
Yellow (video)
Y
White (audio L/MONO)
W
Red (audio R)
R
To ANT input
To S-video
input
W
R
Video equipment with S-video terminal
To ANT output
R
W
To audio outputs
To audio inputs
To video
input
Y
R
W
To audio inputs
Y
To audio
outputs
R
W
To video
output
Video equipment without S-video terminal
To ANT output
9
Installation (continued)
Connecting DVD Player and speakers
To YCbCr inputs
To YCbCr outputs
DVD Player
W
White (audio L/MONO)
R
Red (audio R, Cr)
Red Black Red
To audio
B
R
R
G
W
inputs
To speaker
To speaker
To audio
G
B
R
W
R
outputs
Green (Y)
G B
Blue (Cb)
10
Connecting YPbPr terminals
W
White (audio L/MONO)
R
Red (audio R, Pr) Green (Y)
G
B
Blue (Pb)
To YPbPr inputs
To YPbPr outputs
B
G
G
R
B
R
R
R
To audio
W
inputs
To audio
W
outputs
SET TOP BOX
(Or other equipment with YPbPr output terminals)
11
Installation (continued)
Connecting VGA interface
To VGA input interface
To LINE in
Equipment with VGA output interface
To LINE out
To VGA output interface
12
Elevation adjustment
You can adjust the angle of the LCD TV/Monitor as follows. The elevation can be adjusted from -50 to +100.
13
Menu Introduction
Press MENU button in TV mode
There are four pages of MENU in TV, PC and YPbPr mode. In MENU operations, the CH / buttons are used to select item upwards or downwards; the VOL+/- buttons are used to adjust or confirm selected item.
PICTURE SETTING
Brightness Contrast Color Sharpness Tint
-
-
-
-
-
<V-> or V+> key to change
Press
MENU
button
SOUND
Bass Treble Balance
-
-
-
<V-> or V+> key to change
Press
MENU
button
To adjust the picture's brightness.
50
+
50
+
50
+
50
+
50
+
To adjust the picture's contrast.
To adjust the picture's colour saturation.
To adjust the picture's sharpness.
To adjust the picture's skin colour. (This item is available only in NTSC).
To adjust the Bass.
25
+
25
+
25
+
To adjust the Treble.
To adjust the Balance.
SETUP
Color sys Sound sys Language OSD position OSD background
<V-> or V+> key to change
Press
MENU
button
CHANNEL SETTING
Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip
<V-> or V+> key to change
AUTO
BG
Eng
Upper Left
Opaque
12 15 ON
To adjust colour system. To adjust sound system. To select OSD menu language. To select OSD menu position. To set OSD background.
To start auto search. To enter into channel search menu. To enter into fine tuning menu.
To exchange current channel with the selected target channel.
To display current channel number. To select a target channel to exchange with current
channel. To skip or unskip, current channel.
14
Press MENU button in PC mode
PICTURE SETTING
Brightness Contrast Phase Frequency USER_R USER_G USER_B Color Temp
-
-
-
-
-
-
-
<V-> or V+> key to change
9300K
+
25
+
25
+
25
+
25
+
25
+
25
+
25
Press
MENU
button
PICTURE POSITION
Horizontal Vertical Reset
-
-
<V-> or V+> key to change
25
+
25
+
To adjust picture's brightness and contrast in PC mode. (not affect picture in TV or AV mode)
If the best picture can not be obtained after many times of auto correction, you can adjust these two items to obtain the best picture.
Only when the "Color temp" is set to "User", these three items are adjustable.
To adjust colour temperature between 9300K, 7300K, 6500K, and User.
When the VGA input signal is nonstandard, adjust these two items until proper picture position is obtained.
Bass Treble Balance
Language OSD position OSD background
-
-
-
<V-> or V+> key to change
<V-> or V+> key to change
Press
MENU
button
SOUND
Press
MENU
button
SETUP
Upper Left
Eng
Opaque
To reset to factory settings.
To adjust the Bass.
25
+
25
+
25
+
To adjust the Treble. To adjust the Balance.
To select OSD menu language. To select OSD menu position. To set OSD background.
15
Turning On/Off
POWER
CH
MENU
C.SYS
VOL
-
ZOOM
CH
CLK
VOL
+
ENTER
SLP
Turning On
1.
Insert the output plug of the AC power adaptor into the DC power input of the unit.
2.
Press the power switch on AC power adaptor and the red indicator lights up, the TV/Monitor is in STANDBY mode.
3.
Press the POWER button on the unit's control panel or the button on the remote control to turn on.
Turning Off
1.2.If you want to turn off the power completely, press the power switch on the AC adaptor. If you want to turn off temporarily, press the POWER button on the unit's control panel or the button on the remote control, the set goes to STANDBY and the indicator turns to red.
AUTO.ADJ
1 4
7
AV
STILL
P.M
OSD
POSITION
DSP
Notes:
This TV set can automatically turn off by:
3
2 5
6 9
8
-
/
Bass+
Bass -
--
Treb+
Treb-
0
1. When there is no TV signal input for about 15 minutes;
2. Sleep timer;
3. Off timer.
Selecting input signal
1.
Press the AV button on the remote control or SOURCE button on the set's panel to select input mode. You can select TV, AV, S-Video, YCbCr, YPbPr or PC.
2.
If you want to go to TV mode, press AV button repeatedly to select TV mode.
3.
Press DSP button, the screen display current mode. Press ENTER to cancel OSD.
16
Channel Preset
CHANNEL SETTING
Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip
<V-> or V+> key to change
POWER
CH
VOL
-
ZOOM
P.M
CH
CLK
DSP
MENU
C.SYS
AUTO.ADJ
12 15 ON
VOL
+
ENTER
SLP
To enter into CHANNEL SETTING menu
1. Press MENU button repeatedly to display CHANNEL SETTING menu.
2. Press CH or CH button to select item.
3. Press VOL+ or VOL- button to confirm or adjust selected item.
Auto Search
Please enter into CHANNEL SETTING menu and select Auto Search item. Press VOL- or VOL+ button to start Auto Search and all active programs will be memorised. During the process of Auto Search, pressing MENU button will stop Auto Search.
Auto search.. 10
VHFL
Press <Menu> to escape
Notes:
Please confirm the sound system is correct according to your area before Auto Searching.
Manual Search
1 4
AV
STILL
7
OSD
POSITION
Use manual search function if desired channels cannot be preset or if
3
2
you would like to preset channels to specific position numbers one by one.
5
6
Use 0~9 digit buttons or CH buttons to
/
select a position number firstly, then enter into
9
8
-
/
Bass+
Bass -
--
Treb+
Treb-
0
CHANNEL SETTING menu and select Search item. Press VOL+ button to enter Channel Search sub-menu, then press VOL+ or VOL- to start manual search. Press MENU button can exit Channel Search sub-menu.
Channel searching.. VHFL 10
Press <V->/<V+> to search channel Press <P->/<P+> to shift band
Fine Tuning
In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.
Use 0~9 digit buttons or CH buttons to select the desired channel, then enter into
CHANNEL SETTING menu and select Fine tune item. Press VOL+ button to enter into Fine tuning sub-menu, then press and hold VOL+ or VOL- to start Fine tuning.
/
Fine Tuning.. 10
VHFL
Press <Menu> to change
17
Channel Preset (continued)
CHANNEL SETTING
Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip
<V-> or V+> key to change
POWER
CH
VOL
-
MENU
C.SYS
AUTO.ADJ
CH
CLK
ZOOM
P.M
DSP
1
2 5
4
12 15
ON
VOL
+
3
6
ENTER
SLP
Channel Skipping
You can skip unnecessary channels by using Skip function when you browse program by CH buttons.
Use 0~9 digit buttons or CH buttons to select a unwanted channel
/
/
firstly, then enter into CHANNEL SETTING menu and select Skip item. Press VOL+/- button to select ON to skip this channel. Now this channel will be skipped when you browse channels with CH button.
/
To restore the skipped channel, please select the skipped channel with
0~9 digit buttons and then enter the CHANNEL SETTING menu, select Skip item and press VOL+/- to set Skip to OFF.
Channel Edit
After Auto Channel Preset, this function is for you to edit the order of programs conveniently according to your favourite.
Please enter into CHANNEL SETTING menu and select Change to Prog item by
CH buttons, press VOL+/- button to
/
select a target channel to exchange with current channel. Then select Change Prog item and press VOL+/- to confirm. Now the program in current channel number exchanges with the program in the target channel number.
CHANNEL SETTING
Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip
<V-> or V+> key to change
12 15
ON
AV
STILL
7
OSD
POSITION
9
8
-
/
Bass+
Bass -
--
Treb+
Treb-
0
18
Channel Select
POWER
VOL
-
MENU
C.SYS
AUTO.ADJ
1
ZOOM
P.M
CH
CH
2
CLK
DSP
VOL
+
3
ENTER
SLP
8
Press -/-- button repeatedly to display "--".
Press -/-- button repeatedly to display "--".
Use 0~9 digit buttons and -/-- button
Use 0~9 digit buttons to select one-digit channel number.
Press -/-- button to display "-".
To select two-digit channel:
Press 1-9
- ­buttons.
To select three-digit channel:
Press 1-9
--­buttons.
Press 0-9 direct
-
channel selector.
Press 0-9
-1 buttons.
Press 0-9
--1 -18 buttons.
8
18
Press 0-9 buttons.
180
4
AV
STILL
7
OSD
POSITION
5
6 9
8
-
/
Bass+
Bass -
--
Treb+
Treb-
CH CH
/
button, the channel number increases; button, the channel number decreases.
Using CH button
Press Press
0
Use previous channel button
Press this button to switch between the current channel and previous channel.
19
Picture Adjustment
PICTURE SETTING
-
Brightness
-
Contrast
-
Color
-
Sharpness
-
Tint
<V-> or V+> key to change
POWER
CH
VOL
-
ZOOM
P.M
CH
CLK
DSP
MENU
C.SYS
AUTO.ADJ
VOL
+
+ + + + +
ENTER
SLP
50 50 50 50 50
Adjusting picture
1. Press MENU button to display PICTURE SETTING menu.
2. Press CH button to select item.
/
3. Press VOL+/- button to adjust the selected item.
Item
Bright
Contrast
Saturation
Sharpness
Tint*
VOL-
darker
weaker
paler
softer
purplish
VOL+
lighter
stronger
deeper
sharper
greenish
* Note: The item Tint is for NTSC only.
The adjusted settings are stored in the User mode. There are three preset picture modes and one User-set picture mode. Press the P.M button to select a picture mode according to your favourites.
AV
STILL
1 4
7
OSD
POSITION
3
2
You can quickly select picture mode by P.M button. There are
4. Press P.M button to select picture mode.
5
6 9
8
-
/
0
--
four picture mode: Bright, Standard, Mild and User mode.
Using STILL button
You can still current screen picture by pressing STILL button on the remote. Press this button again to resume.
Treb+
Bass+
Using AUTO.ADJ button
Bass -
Treb-
When wrong picture identification occurs, you can use AUTO.ADJ button on the remote to obtain a correct picture.
20
Sound
-
Bass
-
Treble
-
Balance
<V-> or V+> key to change
POWER
VOL
-
MENU
C.SYS
ZOOM
AUTO.ADJ
1 4
SOUND
CH
CH
P.M
2 5
CLK
DSP
VOL
+
3 6
+ + +
ENTER
SLP
25 25 25
1. Press MENU button repeatedly to display SOUND menu.
2. Press CH button to select item.
/
3. Press VOL+/- button to adjust the selected item.
Item
Bass
Treble
Balance
VOL-
weaker weaker
decreases the
right channel
VOL+
stronger stronger
decreases the
left channel
Notes:
You can quickly adjust Bass and Treble by using Bass+/Bass- and Treb+/Treb- buttons on the remote.
Adjusting Volume
You can use VOL+ or VOL- button to adjust volume. Press VOL+ button, the volume increase; Press VOL- button, the volume decrease.
Adjusting Sound
9
8
7
Muting the Sound
If you want to mute the sound, press button on the remote.
-
AV
0
/
--
To resume the sound, press this button again or you can also press VOL+ or VOL- to resume the sound.
STILL
OSD
POSITION
Bass+
Bass -
Treb+
Treb-
Setting Sound mode
This unit can receive both stereo and bilingual broadcasts Transmitted in either NICAM or A2 broadcast system. Press C.SYS button on the remote to call up the menu as shown on the above, press CH to select Sound mode item, then making use of VOL+/- to select a desired sound mode. See the following chart for a possible choice.
* When receiving broadcasts transmitted in A2 system:
Broadcast
mode
FM MONO MONO
FM STEREO FORCE MONO FM STEREO* (default)
FM BILINGUAL FM A (default) FM B
Choice
Color sys Sound sys Sound mode
AUTO
BG
AUTO
/
* When receiving broadcasts transmitted in NICAM system:
Broadcast
mode
FM/AM MONO
FM/AM MONO & NICAM MONO
FM/AM MONO & NICAM STEREO
FM/AM MONO & NICAM BILINGUAL
FORCE MONO NICAM MONO*(default)
FORCE MONO NICAM STEREO*(default)
FORCE MONO NICAM A*(default) NICAM B
Choice
MONO
Note: "Default" means the choice is a default one. If you do not select other choice, the TV will be in default sound mode. Please according to your local area's broadcasting condition, select your desired sound mode. Sound mode function is an optional function. It is only available in certain version.
21
System setting
Color sys Sound sys Language OSD position OSD background
<V-> or V+> key to change
POWER
VOL
-
MENU
C.SYS
AUTO.ADJ
SETUP
ZOOM
P.M
CH
CH
CLK
DSP
AUTO
BG
Eng
Upper Left
Opaque
VOL
+
ENTER
SLP
To enter into SETUP menu
1. Press MENU button repeatedly to display SETUP menu.
2. Press CH button to select item.
/
3. Press VOL+ or VOL- button to adjust the selected item.
Colour system
From the SETUP menu, press CH to select Colour sys item. Press VOL- or VOL+ button to select a proper colour system according to your area or you can select AUTO.
/
Sound system
From the SETUP menu, press CH to select Sound sys item. Press VOL- or VOL+ button to select a correct sound system.
/
Notes:
.
You can quickly access colour and sound system by using C.SYS button on the remote.
.
In some model, the Colour system and Sound system have been preset and cannot be adjusted.
/
Setting OSD Language
From the SETUP menu, press CH to select Language item. Press VOL- or
VOL+ button to select OSD language.
/
Color sys Sound sys Language OSD position OSD background
<V-> or V+> key to change
SETUP
AUTO
BG
Eng
Upper Left
Opaque
22
Color sys Sound sys Language OSD position OSD background
<V-> or V+> key to change
POWER
SETUP
AUTO
BG
Eng
Upper Left
Opaque
Setting OSD position
From the SETUP menu, press CH to select OSD position item. Press VOL- or VOL+ button to select an OSD position in your preference.
/
Notes:
You can quickly select OSD position by using OSD position button on the remote.
Setting OSD Background
VOL
-
MENU
C.SYS
AUTO.ADJ
1 4
7
AV
STILL
ZOOM
P.M
OSD
POSITION
CH
CH
5 8 0
2
CLK
DSP
Bass+
Bass -
VOL
+
3
6
9
-
/
--
Treb+
Treb-
ENTER
SLP
From the SETUP menu, press CH to
/
select OSD Background item. Press VOL- or VOL+ button to select Opaque or Translucent.
Color sys Sound sys Language OSD position OSD background
SETUP
AUTO
BG
Eng
Upper Left
Opaque
<V-> or V+> key to change
Setting ZOOM mode
This unit allows you to adjust screen aspect ratio in your preference. You can quickly select screen ratio by using ZOOM button on the remote. Press ZOOM button to select a proper screen aspect ratio between Anamorphic, 4:3 and Panorama in TV, AV, S-Video and YCbCr mode. Press ZOOM button to select a proper screen aspect ratio between Fill all and Normal in PC and YPbPr mode.
23
Timer
Turn off
Use SLP button
Press SLP button repeatedly to set sleep time between: 0, 10, 20, 30, 60,
0
90,120,180,240 minutes. If you select 0 minute, it means the sleep timer function is turned off.
Use CLK button
POWER
VOL
-
MENU
C.SYS
AUTO.ADJ
1 4
7
AV
ZOOM
P.M
CH
CH
5 8 0
Press CLK button, the Time menu appears. Use CH to select hour or minute (the
/
Current time
0:40
selected item is displayed in white), use
VOL+/- to set the time.
VOL
+
Press CLK button twice, the Turn off menu
CLK
ENTER
SLP
appears. Use VOL+/- to set the OFF time.
Turn off
0
Press CLK button three times to close the menu.
DSP
3
2
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Bass -
Treb+
Treb-
24
Adjustments in YPbPr mode
To enter into YPbPr mode
YPbPr
POWER
VOL
MENU
C.SYS
AUTO.ADJ
1
Repeatedly press AV button on the remote control or SOURCE button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is a signal input.
Adjusting picture
In YPbPr mode when there is correct input signal, press MENU button and PICTURE
SETTING menu appears, Use CH to
CH
CH
2
CLK
DSP
VOL
+
ENTER
SLP
3
-
ZOOM
P.M
select item and VOL+/- to adjust.
Item
Bright
Contrast
Saturation
Sharpness
VOL-
darker
weaker
paler
softer
stronger
deeper
sharper
Adjusting Colour temperature
/
VOL+
lighter
PICTURE SETTING
-
Brightness
-
Contrast
-
Saturation
-
Sharpness
-
USER_R
-
USER_G
-
USER_B Color Temp
<V-> or V+> key to change
9300K
+
25
+
25
+
25
+
25
+
25
+
25
+
25
AV
STILL
4 7
OSD
POSITION
5
6
You can select different Colour temperature to obtain correct white. Press MENU button,
9
8
use CH to select Color Temp item,
/
press the VOL+/- to select between User,
-
/
0
--
9300K, 7300K, 6500K. The USER_R, USER_G and USER_B can
Bass+
Treb+
not accessed and adjusted unless you
PICTURE SETTING
-
Brightness
-
Contrast
-
Saturation
-
Sharpness
-
USER_R
-
USER_G
-
USER_B Color Temp
<V-> or V+> key to change
9300K
+
25
+
25
+
25
+
25
+
25
+
25
+
25
set Color Temp to "User".
Bass -
Treb-
Adjusting horizontal/vertical position
Press MENU button twice and the PICTURE POSITION menu appears. Use CH to select item and VOL+/- to adjust.
When a nonstandard signal input to the set and the picture may not be in the screen centre. Now you can adjust its horizontal and vertical position to display correctly.
/
PICTURE POSITION
-
Horizontal
-
Vertical Reset
<V-> or V+> key to change
25
+
25
+
25
Adjustments in PC mode
To enter into PC mode
PC
POWER
VOL
MENU
C.SYS
AUTO.ADJ
1
Repeatedly press AV button on the remote control or SOURCE button on the set's panel until the screen display PC, which indicates that the set is in PC mode.
PC signal format
Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the follows: 640 x 480 @60Hz 800 x 600 @60Hz
CH
CH
VOL
+
ENTER
SLP
CLK
DSP
3
2
-
ZOOM
P.M
1024 x 768 @60Hz 1280 x 768 @60Hz
We recommend you to use 1024 x 768 @60Hz (4:3) or 1280 x 768 @ 60 Hz (16:9) so that the set can obtain the best picture.
Use AUTO.ADJ button
AV
STILL
4 7
OSD
POSITION
5
6
9
8
-
/
0
--
button, the set corrects picture automatically including frequency and phase to obtain the best display. During the process of auto correction, all buttons on the remote control and set's panel do not work until this process is finished. When the set displays some signal formats that are nonstandard and can
When PC signal format changes or when you switch to PC mode by AV
Bass+
Treb+
not adjust by itself to the best displaying status, now you can press
AUTO.ADJ button to correct the displaying again.
Bass -
Treb-
26
PICTURE SETTING
-
Brightness
-
Contrast
-
Phase
-
Frequency
-
USER_R
-
USER_G
-
USER_B Color Temp
<V-> or V+> key to change
POWER
VOL
-
MENU
C.SYS
ZOOM
CH
CH
9300K
CLK
+ + + + + + +
VOL
+
25 25 25 25 25 25 25
ENTER
SLP
When there is correct input signal, press MENU button and PICTURE
SETTING menu appears. Use CH to select item and VOL+/- to
/
adjust
Adjusting brightness and contrast
You can adjust bright and contrast in PC mode and this adjustment does not effect the brightness and contrast in TV and AV mode.
Adjusting phase and frequency
If you can not obtain the best display after auto correction for many times. Now you can adjust phase and frequency to obtain the best display.
PICTURE SETTING
-
Brightness
-
Contrast
-
Phase
-
Frequency
-
USER_R
-
USER_G
-
USER_B Color Temp
<V-> or V+> key to change
9300K
+
25
+
25
+
25
+
25
+
25
+
25
+
25
AUTO.ADJ
1 4
7
AV
STILL
P.M
OSD
POSITION
DSP
3
2 5
6 9
8
-
/
0
--
Adjusting Colour temperature
You can select different Colour temperature to obtain correct white. Press MENU button, use CH to select Color Temp item, press the VOL+/- to select between User, 9300K, 7300K, 6500K. The USER_R, USER_G and USER_B can not accessed and adjusted unless you
/
PICTURE SETTING
-
Brightness
-
Contrast
-
Phase
-
Frequency
-
USER_R
-
USER_G
-
USER_B Color Temp
<V-> or V+> key to change
9300K
+
25
+
25
+
25
+
25
+
25
+
25
+
25
set Color Temp to "User".
Treb+
Bass+
Bass -
Treb-
27
Trouble shooting
Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
Symptoms
Power is not turned on. Poor colour, poor tint.
Spots appear on the screen.
Stripes appear on the screen.
Double images or "ghosts".
Snowy picture.
TV cabinet creaks.
Check the following items
Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted. Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc. Possible interference of electronic interference
from another TV set, a computer, an electronics game machine, a broadcast station, etc.
This may be caused by reflections from nearby mountains or buildings. Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or has come off. Check the antenna direction.
Even if the picture or the sound is normal, changes in the room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.
Remote control does not work.
The batteries may be worn out. The batteries may be installed with their polarity reversed.
Control buttons do not work
Unplug the power cord, wait for some seconds. Then re-plug the power cord and turn on the unit again.
LCD Display panel information
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays. The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel. This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel deterioration can be limited by observing the following steps: A. Reduce the brightness/contrast setting to a minimum viewing level. B. Do not display the fixed image for extended periods of time. C. Turn the power off when not in actual use.
Note:
The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.
28
Specifications
Power Supply for AC adaptor: Power Consumption: Dimensions (mm): Weight (kg): SCREEN: TV system & channel range. SYSTEM PAL-B/G Colour system: Sound output: Accessories
110-240V 50/60Hz
160W 932 (W) x 553 (H) x 245 (D)
16.3 76cm
VHF 2-12 PAL BG, NTSC Playback 5W x 2 One remote controller; One AC adaptor
UHF 21-69
CATV X~Z+2, S1~S41
Design and specifications are subject to change without notice.
29
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111 FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
604-L32B13-07A
Ver. 1.0
Loading...